How far is Yankton, SD from Porcupine, SD?

The driving distance from Yankton, SD to Porcupine, SD is about 325.3 miles (523.6 km), with a travel time of about 06h 52m by car.

  • The straight-line flight distance is about 250.4 miles (402.9 km).
  • For a round trip, plan for roughly 13h 45m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 7:30 AM CDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
325.37 mi
06h 52m
Flight
250.34 mi
402.89 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Yankton.

Flight Distance

Direct air line
250.34 mi
Kilometers
402.89 km
Flight Time
00h 30m

Driving Distance

Road route
325.37 mi
Kilometers
523.64 km
Drive Time
06h 52m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 06h 52m.

Arrival Snapshot
Arrive in Porcupine
Thu, Oct 15, 6:42 PM MDT
Return by in Yankton
Fri, Oct 16, 2:35 AM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Yankton
2026-10-15T12:49
Arrive Porcupine
Thu, Oct 15, 7:42 PM CDT
Route Timing
06h 52m
One way by road
Best Departure Window
6:00 AM to 7:30 AM CDT
Treat this as a longer travel day
Arrive between
11:53 AM to 1:23 PM MDT

Starting early still helps, but most travelers will want a longer stop or an overnight stay on a route this long.

Leave by
10:14 PM CDT
Keeps a same-day return open with about 08h 00m at the destination.
Back in Yankton
8:00 PM CDT
Overnight-style route

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Millboro
SD

Township in Tripp County, South Dakota

From Yankton
162.4 mi
03h 26m
To Porcupine
163 mi
03h 26m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
47°F
Overnight

Showers And Thunderstorms

Starts
Thu, Oct 15 3:00 AM CDT
Wind
5 mph NNE
Destination
55°F
Thursday

Rain Showers

Starts
Thu, Oct 15 5:00 AM MDT
Wind
6 to 26 mph N

Driving Route Map

The map below follows the saved road route between Yankton and Porcupine.

Turn-by-Turn Driving Directions

Step-by-step road directions between Yankton and Porcupine.

  1. 1

    Start on West 4th Street

    15 m · 5 sec · West 4th Street

  2. 2

    Turn right onto Broadway Avenue

    9.9 mi · 11 min · Broadway Avenue

  3. 3

    Turn right onto Highway 12

    4 mi · 5 min · Highway 12

  4. 4

    Continue on Harold Street

    1.1 mi · 2 min · Harold Street

  5. 5

    Continue on Highway 12

    27.2 mi · 31 min · Highway 12

  6. 6

    Continue on Walnut Street

    1.4 km · 2 min · Walnut Street

  7. 7

    Continue on Highway 12

    9.4 mi · 11 min · Highway 12

  8. 8

    Continue on East Main Street

    2687 ft · 54 sec · East Main Street

  9. 9

    Continue on Highway 12

    7 mi · 8 min · Highway 12

  10. 10

    Continue on Grant Street

    2878 ft · 58 sec · Grant Street

  11. 11

    Continue on Highway 12

    16.6 mi · 20 min · Highway 12

  12. 12

    At the end of the road, turn right onto Highway 281

    2.7 mi · 3 min · Highway 281

  13. 13

    Continue on Hillcrest Boulevard

    1361 ft · 23 sec · Hillcrest Boulevard

  14. 14

    Continue on South Thayer Street

    1 km · 56 sec · South Thayer Street

  15. 15

    Turn left onto Highway 12

    9.1 mi · 12 min · Highway 12

  16. 16

    Turn left onto Broadway Street

    1.2 km · 1 min · Broadway Street

  17. 17

    Continue on Highway 12

    23.4 mi · 29 min · Highway 12

  18. 18

    Continue straight

    4 mi · 5 min

  19. 19

    Turn right

    22.1 mi · 27 min

  20. 20

    At the end of the road, turn left

    5 mi · 6 min

  21. 21

    Turn right onto West Turbine Avenue

    48.2 mi · 1 hr 1 min · West Turbine Avenue

  22. 22

    Turn left onto North Main Street

    1.1 km · 55 sec · North Main Street

  23. 23

    Turn right onto West C Street

    90.9 mi · 1 hr 46 min · West C Street

  24. 24

    Turn right onto South Main Street

    1 mi · 2 min · South Main Street

  25. 25

    Continue on State Highway 27

    13.6 mi · 16 min · State Highway 27

  26. 26

    Continue on State Highway 391

    3.3 mi · 6 min · State Highway 391

  27. 27

    Turn left

    8 mi · 9 min

  28. 28

    Turn right onto Big Foot Trail

    14.6 mi · 35 min · Big Foot Trail

  29. 29

    Turn right onto Main Street

    38 m · 9 sec · Main Street

  30. 30

    Turn left onto Eagle Drive

    9 m · 1 sec · Eagle Drive

  31. 31

    Arrive at your destination

    0 m · 1 sec · Eagle Drive

Car Route Details

A richer read on the saved driving route between Yankton and Porcupine.

OSRM road route
Drive Character

Long-distance drive

This route is long enough that fuel, rest stops, weather, and timing matter more than any single maneuver.

Directions
31 steps
15 turns on the saved route
Ramps & Exits
0
0 merges, 0 ramps or exits
Navigation Density
9.5 / 100 mi
Decision points by distance
Main Roads
Highway 12
101 mi · 31%
West C Street
90.9 mi · 28%
West Turbine Avenue
48.2 mi · 15%
Big Foot Trail
14.6 mi · 4%
State Highway 27
13.6 mi · 4%
Broadway Avenue
9.91 mi · 3%
Longest Stretch

West C Street

Turn right onto West C Street

90.9 mi · 01h 46m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

Better with a longer stop

This route is long enough that most travelers will be better off planning an overnight stay or a more deliberate stop window.

Drive Time
06h 52m
Overnight route
Same-Day Return
13h 46m
Round-trip wheel time
Road vs Air
+74.9 mi
250.4 mi direct line
Halfway Stop
Millboro
03h 26m from Yankton
Leave By
10:14 PM CDT
Overnight-style route
Weather Watch

Showers And Thunderstorms leaving Yankton and Rain Showers near Porcupine.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Yankton to Porcupine?

The road trip is about 325.3 miles (523.6 km) and usually takes 06h 52m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route is long enough that most travelers will be better off planning an overnight stay or a more deliberate stop window.

What is the halfway point on this route?

Millboro is a useful midpoint, sitting about 162.4 miles from Yankton and 163 miles from Porcupine.

How much longer is the road route than the straight-line distance?

The direct path is about 250.4 miles (402.9 km), while the road route adds roughly 74.9 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 7:30 AM CDT. Starting early still helps, but most travelers will want a longer stop or an overnight stay on a route this long.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $48.59 one way or $97.19 round trip. Estimated CO2 is about 102 kg one way.

Do you cross a time zone on this route?

Yes. There is about a 1 hour time difference between Yankton and Porcupine, so arrival and return times should be read in local time.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms around Yankton and Rain Showers near Porcupine.

Flight Path Map

This map shows the direct air route between Yankton and Porcupine. Straight-line distance: 250.34 mi (402.89 km).

Yankton

#1 Yankton

County seat of Yankton County, South Dakota, United States

Population14,651
Coordinates42.8711100, -97.3972800
Altitude368
CountryUnited States
Photo coming soon

#2 Porcupine

Situated on the Pine Ridge Indian Reservation in southwestern South Dakota, this census-designated place lies within Oglala Lakota County at an elevation of 3,192 feet.

Population0
Coordinates43.2397100, -102.3309900
Altitude973
CountryUnited States
Start: Yankton (-97.39728, 42.87111)
End: Porcupine (-102.33099, 43.23971)

Estimated Travel Time

Distance: 524 km by road

SpeedTime
30 mph (48.3 km/h)10h 50m
40 mph (64.37 km/h)08h 08m
50 mph (80.47 km/h)06h 30m
60 mph (96.56 km/h)05h 25m
70 mph (112.65 km/h)04h 38m
80 mph (129 km/h)04h 03m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
11.48 gal
43.46 L · about $48.59
Round trip
$97.19
22.96 gal · 86.92 L
Estimated CO2
102 kg one way
Round trip: 204 kg / 450 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $4.23 $48.59 $97.19
Mid-grade $4.46 $51.19 $102.38
Premium $5.05 $57.99 $115.97
Diesel $6.01 $68.97 $137.94

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in South Dakota · Oct 15, 2026

Please keep in mind that there is a 1 hour time gap between Yankton, SD and Porcupine, SD. The current time in Yankton is 12:49:31, although it is 11:49:31 in Porcupine.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.