How far is Maltby, WA from Marysville, WA?
The driving distance from Maltby, WA to Marysville, WA is about 22.5 miles (36.2 km), with a travel time of about 00h 36m by car.
- The straight-line flight distance is about 17.3 miles (27.8 km).
- For a round trip, plan for roughly 01h 13m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM PDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 36m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Snohomish County, Washington, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Mostly Cloudy
Driving Route Map
The map below follows the saved road route between Maltby and Marysville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Maltby and Marysville.
-
1
Start on Broadway Avenue
39 m · 8 sec · Broadway Avenue
-
2
Turn slight right onto Maltby Road
1.4 mi · 3 min · Maltby Road
-
3
Turn right onto State Route 9
4.1 mi · 7 min · State Route 9
-
4
Continue on State Route 9
5.3 mi · 8 min · State Route 9
-
5
Enter the roundabout and take exit 2 toward State Route 9
25 m · 2 sec · State Route 9
-
6
Exit the roundabout onto State Route 9
1.3 mi · 2 min · State Route 9
-
7
Take the ramp left toward US 2 West: Everett, Seattle
1619 ft · 44 sec
-
8
Merge slight left
4.5 mi · 6 min
-
9
Keep slight right to continue on I 5 North: Vancouver British Columbia
2194 ft · 55 sec
-
10
Merge slight left
4.6 mi · 6 min
-
11
Take the exit slight right toward WA 528 East: Marysville
1114 ft · 30 sec
-
12
Turn right onto 4th Street
1621 ft · 38 sec · 4th Street
-
13
Turn right onto State Avenue
7 m · 1 sec · State Avenue
-
14
Arrive at your destination
0 m · 1 sec · State Avenue
Car Route Details
A richer read on the saved driving route between Maltby and Marysville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
State Route 9
Continue on State Route 9
5.32 mi · 00h 08m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Cloudy leaving Maltby and Mostly Cloudy near Marysville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Maltby to Marysville?
The road trip is about 22.5 miles (36.2 km) and usually takes 00h 36m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Snohomish is a useful midpoint, sitting about 11.2 miles from Maltby and 11.2 miles from Marysville.
How much longer is the road route than the straight-line distance?
The direct path is about 17.3 miles (27.8 km), while the road route adds roughly 5.2 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM PDT. If you want a more comfortable same-day return, try to leave by 7:16 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $4.13 one way or $8.27 round trip. Estimated CO2 is about 7 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Maltby and Mostly Cloudy near Marysville.
Stop Ideas Near Snohomish
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Snohomish.
Everett Station
Monroe, Washington
Monroe (Eastbound), WA
Edmonds station
Flight Path Map
This map shows the direct air route between Maltby and Marysville. Straight-line distance: 17.3 mi (27.84 km).
#1 Maltby
Census designated place
| Population | 10,830 |
| Coordinates | 47.8051000, -122.1131800 |
| Altitude | 122 |
| Country | United States |
#2 Marysville
The most populous city in Snohomish County, Washington.
| Population | 71,392 |
| Coordinates | 48.0517600, -122.1770800 |
| Altitude | 6 |
| Country | United States |
End: State Avenue (-122.177018, 48.05176)
Estimated Travel Time
Distance: 36 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 44m |
| 40 mph (64.37 km/h) | 00h 33m |
| 50 mph (80.47 km/h) | 00h 26m |
| 60 mph (96.56 km/h) | 00h 22m |
| 70 mph (112.65 km/h) | 00h 19m |
| 80 mph (129 km/h) | 00h 16m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $5.23 | $4.13 | $8.27 |
| Mid-grade | $5.57 | $4.40 | $8.80 |
| Premium | $5.77 | $4.56 | $9.12 |
| Diesel | $5.47 | $4.32 | $8.64 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Washington · May 07, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.