How far is Maltby, WA from Yakima, WA?
The driving distance from Maltby, WA to Yakima, WA is about 152.5 miles (245.5 km), with a travel time of about 02h 29m by car.
- The straight-line flight distance is about 112.3 miles (180.7 km).
- For a round trip, plan for roughly 04h 59m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 29m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Kittitas County, Washington, USA
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Driving Route Map
The map below follows the saved road route between Maltby and Yakima.
Turn-by-Turn Driving Directions
Step-by-step road directions between Maltby and Yakima.
-
1
Start on Broadway Avenue
39 m · 6 sec · Broadway Avenue
-
2
Turn slight right onto Maltby Road
121 m · 12 sec · Maltby Road
-
3
Turn right onto 87th Avenue Southeast
14 m · 4 sec · 87th Avenue Southeast
-
4
Turn right
38 m · 13 sec
-
5
Turn left onto Maltby Road
762 ft · 24 sec · Maltby Road
-
6
At the end of the road, turn right onto Yew Way
985 ft · 24 sec · Yew Way
-
7
Turn left onto Paradise Lake Road
86 m · 9 sec · Paradise Lake Road
-
8
Turn right onto State Route 522
5 mi · 6 min · State Route 522
-
9
Take the exit slight right toward I 405 South: Bellevue
1.3 km · 59 sec
-
10
Turn slight left
11.6 mi · 15 min
-
11
Take the exit slight right toward I 90: Spokane, Seattle
2527 ft · 1 min
-
12
Keep slight left to continue on I 90 East: Spokane
2797 ft · 1 min
-
13
Merge slight left
100.4 mi · 1 hr 52 min
-
14
Take the exit slight right toward I 82 East, WA 97 South: Yakima
31.4 mi · 35 min
-
15
Take the exit slight right toward US 12 west, North 1st Street
96 m · 5 sec
-
16
Keep slight left
1094 ft · 27 sec
-
17
Continue on Selah Road
774 ft · 13 sec · Selah Road
-
18
Continue on North 1st Street
1.6 mi · 4 min · North 1st Street
-
19
Arrive at your destination
0 m · 1 sec · South 1st Street
Car Route Details
A richer read on the saved driving route between Maltby and Yakima.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 90 East
Merge slight left
100 mi · 01h 52m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Cloudy leaving Maltby and Sunny near Yakima.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Maltby to Yakima?
The road trip is about 152.5 miles (245.5 km) and usually takes 02h 29m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Roslyn is a useful midpoint, sitting about 76.2 miles from Maltby and 76.3 miles from Yakima.
How much longer is the road route than the straight-line distance?
The direct path is about 112.3 miles (180.7 km), while the road route adds roughly 40.2 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 1:30 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $28.15 one way or $56.31 round trip. Estimated CO2 is about 47.8 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Maltby and Sunny near Yakima.
Stop Ideas Near Roslyn
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Roslyn.
Leavenworth, Washington
Leavenworth
Columbia Station
Stevens Pass, Washington
Flight Path Map
This map shows the direct air route between Maltby and Yakima. Straight-line distance: 112.25 mi (180.65 km).
#1 Maltby
Census designated place
| Population | 10,830 |
| Coordinates | 47.8051000, -122.1131800 |
| Altitude | 122 |
| Country | United States |
#2 Yakima
The second most populous city in Yakima County, Washington.
| Population | 94,322 |
| Coordinates | 46.6020700, -120.5059000 |
| Altitude | 326 |
| Country | United States |
End: South 1st Street (-120.50599, 46.602051)
Estimated Travel Time
Distance: 245 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 05h 04m |
| 40 mph (64.37 km/h) | 03h 48m |
| 50 mph (80.47 km/h) | 03h 03m |
| 60 mph (96.56 km/h) | 02h 32m |
| 70 mph (112.65 km/h) | 02h 10m |
| 80 mph (129 km/h) | 01h 54m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $5.23 | $28.15 | $56.31 |
| Mid-grade | $5.57 | $29.95 | $59.90 |
| Premium | $5.77 | $31.05 | $62.10 |
| Diesel | $5.47 | $29.41 | $58.82 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Washington · May 07, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.