How far is Marysville, WA from Maltby, WA?
The driving distance from Marysville, WA to Maltby, WA is about 22.2 miles (35.7 km), with a travel time of about 00h 34m by car.
- The straight-line flight distance is about 17.3 miles (27.8 km).
- For a round trip, plan for roughly 01h 08m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM PDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 34m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Snohomish County, Washington, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Mostly Cloudy
Driving Route Map
The map below follows the saved road route between Marysville and Maltby.
Turn-by-Turn Driving Directions
Step-by-step road directions between Marysville and Maltby.
-
1
Start on State Avenue
2860 ft · 1 min · State Avenue
-
2
Enter the roundabout and take exit 1 toward State Route 529
21 m · 1 sec · State Route 529
-
3
Exit the roundabout onto State Route 529
31 m · 2 sec · State Route 529
-
4
Take the ramp straight toward I 5
1551 ft · 38 sec
-
5
Merge slight left
3.9 mi · 5 min
-
6
Take the exit slight right toward US 2 East: Wenatchee, Everett Avenue
1141 ft · 24 sec
-
7
Keep slight left to continue on US 2 East: Snohomish, Wenatchee
2047 ft · 44 sec
-
8
Merge slight left
4.6 mi · 6 min
-
9
Take the exit slight right toward State Route 9: Arlington, Bothell
1443 ft · 43 sec
-
10
Turn right onto State Route 9
1.2 mi · 2 min · State Route 9
-
11
Enter the roundabout and take exit 2 toward State Route 9
37 m · 2 sec · State Route 9
-
12
Exit the roundabout onto State Route 9
5.2 mi · 8 min · State Route 9
-
13
Continue on State Route 9
4.1 mi · 7 min · State Route 9
-
14
Turn left onto Maltby Road
1.4 mi · 3 min · Maltby Road
-
15
Turn slight left onto Broadway Avenue
39 m · 6 sec · Broadway Avenue
-
16
Arrive at your destination
0 m · 1 sec · Broadway Avenue
Car Route Details
A richer read on the saved driving route between Marysville and Maltby.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
State Route 9
Exit the roundabout onto State Route 9
5.24 mi · 00h 08m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Cloudy leaving Marysville and Mostly Cloudy near Maltby.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Marysville to Maltby?
The road trip is about 22.2 miles (35.7 km) and usually takes 00h 34m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Snohomish is a useful midpoint, sitting about 11.1 miles from Marysville and 11.1 miles from Maltby.
How much longer is the road route than the straight-line distance?
The direct path is about 17.3 miles (27.8 km), while the road route adds roughly 4.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM PDT. If you want a more comfortable same-day return, try to leave by 7:22 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $4.08 one way or $8.16 round trip. Estimated CO2 is about 6.9 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Marysville and Mostly Cloudy near Maltby.
Stop Ideas Near Snohomish
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Snohomish.
Everett Station
Monroe, Washington
Monroe (Eastbound), WA
Edmonds station
Flight Path Map
This map shows the direct air route between Marysville and Maltby. Straight-line distance: 17.3 mi (27.84 km).
#1 Marysville
The most populous city in Snohomish County, Washington.
| Population | 71,392 |
| Coordinates | 48.0517600, -122.1770800 |
| Altitude | 6 |
| Country | United States |
#2 Maltby
Census designated place
| Population | 10,830 |
| Coordinates | 47.8051000, -122.1131800 |
| Altitude | 122 |
| Country | United States |
End: Maltby (-122.11318, 47.8051)
Estimated Travel Time
Distance: 36 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 44m |
| 40 mph (64.37 km/h) | 00h 33m |
| 50 mph (80.47 km/h) | 00h 26m |
| 60 mph (96.56 km/h) | 00h 22m |
| 70 mph (112.65 km/h) | 00h 19m |
| 80 mph (129 km/h) | 00h 16m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $5.23 | $4.08 | $8.16 |
| Mid-grade | $5.57 | $4.34 | $8.68 |
| Premium | $5.77 | $4.50 | $9.00 |
| Diesel | $5.47 | $4.26 | $8.53 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Washington · May 07, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.