How far is Hilton Head, SC from Fort Mill, SC?

The driving distance from Hilton Head, SC to Fort Mill, SC is about 229 miles (368.6 km), with a travel time of about 04h 24m by car.

  • The straight-line flight distance is about 193.2 miles (310.9 km).
  • For a round trip, plan for roughly 08h 49m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
229.07 mi
04h 24m
Flight
193.16 mi
310.86 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Hilton Head.

Flight Distance

Direct air line
193.16 mi
Kilometers
310.86 km
Flight Time
00h 23m

Driving Distance

Road route
229.07 mi
Kilometers
368.65 km
Drive Time
04h 24m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 04h 24m.

Arrival Snapshot
Arrive in Fort Mill
Sun, Apr 19, 2:28 AM EDT
Return by in Hilton Head
Sun, Apr 19, 6:53 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Hilton Head
2026-04-18T22:04
Arrive Fort Mill
Sun, Apr 19, 2:28 AM EDT
Route Timing
04h 24m
One way by road
Best Departure Window
6:00 AM to 8:00 AM EDT
Leave early for more breathing room
Arrive between
10:25 AM to 12:25 PM EDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
8:10 AM EDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Hilton Head
9:00 PM EDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Brookdale
SC

Census-designated place in Santa Cruz County, California

From Hilton Head
114.7 mi
02h 12m
To Fort Mill
114.4 mi
02h 12m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
86°F
Saturday

Mostly Sunny

Starts
Sat, Apr 18 6:00 AM EDT
Wind
5 to 12 mph S
Destination
92°F
Saturday

Mostly Sunny

Starts
Sat, Apr 18 6:00 AM EDT
Wind
2 to 10 mph WSW

Driving Route Map

The map below follows the saved road route between Hilton Head and Fort Mill.

Turn-by-Turn Driving Directions

Step-by-step road directions between Hilton Head and Fort Mill.

  1. 1

    Start on William Hilton Parkway

    1601 ft · 29 sec · William Hilton Parkway

  2. 2

    Continue on William Hilton Parkway

    3.8 mi · 4 min · William Hilton Parkway

  3. 3

    Continue on Fording Island Road

    9 mi · 13 min · Fording Island Road

  4. 4

    Take the exit slight right

    1444 ft · 40 sec

  5. 5

    Keep slight right

    45 m · 4 sec

  6. 6

    Merge slight left onto Okatie Highway

    3.9 mi · 5 min · Okatie Highway

  7. 7

    Take the exit slight left

    149 m · 14 sec

  8. 8

    Continue on Lowcountry Drive

    7.9 mi · 11 min · Lowcountry Drive

  9. 9

    Continue on Coosaw Scenic Drive

    9.4 mi · 13 min · Coosaw Scenic Drive

  10. 10

    Take the ramp slight right toward I 95 North, US 17 North: Florence

    1435 ft · 35 sec

  11. 11

    Merge slight left

    57.2 mi · 1 hr 1 min

  12. 12

    Take the exit slight right toward I 26 West: Columbia

    1864 ft · 1 min

  13. 13

    Merge slight left

    57.1 mi · 1 hr 2 min

  14. 14

    Take the exit slight right toward US 1 North: West Columbia

    1062 ft · 26 sec

  15. 15

    Merge slight left onto Augusta Road

    2930 ft · 42 sec · Augusta Road

  16. 16

    Turn straight onto Jarvis Klapman Boulevard

    2.7 mi · 3 min · Jarvis Klapman Boulevard

  17. 17

    Continue on Hampton Street

    1.4 mi · 3 min · Hampton Street

  18. 18

    Turn left onto Bull Street

    1.3 mi · 2 min · Bull Street

  19. 19

    Continue on I. DeQuincey Newman Freeway

    7.6 mi · 9 min · I. DeQuincey Newman Freeway

  20. 20

    Merge slight left onto Charles F Bolden Freeway

    61.7 mi · 1 hr 7 min · Charles F Bolden Freeway

  21. 21

    Take the exit slight right toward US 21, SC 161: Rock Hill, Fort Mill, York

    1199 ft · 29 sec

  22. 22

    Keep slight right to continue on US 21 North: Fort Mill

    2053 ft · 50 sec

  23. 23

    Turn straight onto North Cherry Road

    1.5 mi · 3 min · North Cherry Road

  24. 24

    Turn right onto Spratt Street

    2146 ft · 46 sec · Spratt Street

  25. 25

    Continue on Spratt Street

    1.5 mi · 3 min · Spratt Street

  26. 26

    Turn left onto South White Street

    598 ft · 19 sec · South White Street

  27. 27

    Turn right onto Main Street

    26 m · 2 sec · Main Street

  28. 28

    Arrive at your destination

    0 m · 1 sec · Main Street

Car Route Details

A richer read on the saved driving route between Hilton Head and Fort Mill.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
28 steps
6 turns on the saved route
Ramps & Exits
11
5 merges, 6 ramps or exits
Navigation Density
12.2 / 100 mi
Decision points by distance
Main Roads
Charles F Bolden Freeway
61.7 mi · 27%
I 95 North
57.5 mi · 25%
I 26 West
57.5 mi · 25%
Coosaw Scenic Drive
9.39 mi · 4%
Fording Island Road
9.27 mi · 4%
Lowcountry Drive
7.89 mi · 3%
Longest Stretch

Charles F Bolden Freeway

Merge slight left onto Charles F Bolden Freeway

61.7 mi · 01h 07m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
04h 24m
Long day trip
Same-Day Return
08h 50m
Round-trip wheel time
Road vs Air
+35.8 mi
193.2 mi direct line
Halfway Stop
Brookdale
02h 12m from Hilton Head
Leave By
8:10 AM EDT
Early departure recommended
Weather Watch

Mostly Sunny leaving Hilton Head and Mostly Sunny near Fort Mill.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Hilton Head to Fort Mill?

The road trip is about 229 miles (368.6 km) and usually takes 04h 24m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Brookdale is a useful midpoint, sitting about 114.7 miles from Hilton Head and 114.4 miles from Fort Mill.

How much longer is the road route than the straight-line distance?

The direct path is about 193.2 miles (310.9 km), while the road route adds roughly 35.8 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 8:10 AM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $32.00 one way or $64.01 round trip. Estimated CO2 is about 71.8 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Hilton Head and Mostly Sunny near Fort Mill.

Stop Ideas Near Brookdale

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Brookdale, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Brookdale.

RAIL

Denmark

36 mi away
200 West Baruch Street
RAIL

Columbia

58 mi away
850 Pulaski Street
RAIL

Camden

84 mi away
1060 West Dekalb Street
RAIL

Yemassee

91 mi away
9 Main Street

Flight Path Map

This map shows the direct air route between Hilton Head and Fort Mill. Straight-line distance: 193.16 mi (310.86 km).

Hilton Head

#1 Hilton Head

Resort town in South Carolina, USA

Population37,099
Coordinates32.2163200, -80.7526100
Altitude3
CountryUnited States
Fort Mill

#2 Fort Mill

City in York County, South Carolina, United States of America

Population24,929
Coordinates35.0073700, -80.9450800
Altitude190
CountryUnited States
Start: Hilton Head (-80.75261, 32.21632)
End: Fort Mill (-80.94508, 35.00737)

Estimated Travel Time

Distance: 369 km by road

SpeedTime
30 mph (48.3 km/h)07h 37m
40 mph (64.37 km/h)05h 43m
50 mph (80.47 km/h)04h 34m
60 mph (96.56 km/h)03h 49m
70 mph (112.65 km/h)03h 16m
80 mph (129 km/h)02h 51m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
8.08 gal
30.6 L · about $32.00
Round trip
$64.01
16.16 gal · 61.2 L
Estimated CO2
71.8 kg one way
Round trip: 143.6 kg / 317 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.96 $32.00 $64.01
Mid-grade $4.43 $35.79 $71.57
Premium $4.78 $38.61 $77.21
Diesel $5.62 $45.44 $90.88

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in South Carolina · Apr 19, 2026

There is no time difference between Hilton Head and Fort Mill. The current time is 22:04:11.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.