How far is Silverdale, WA from Marysville, WA?
The driving distance from Silverdale, WA to Marysville, WA is about 50.7 miles (81.6 km), with a travel time of about 01h 56m by car.
- The straight-line flight distance is about 37 miles (59.5 km).
- For a round trip, plan for roughly 03h 53m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 56m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
The eighteenth most populous city in the United States and the center of the Seattle metropolitan area.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Light Rain
Light Rain Likely
Driving Route Map
The map below follows the saved road route between Silverdale and Marysville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Silverdale and Marysville.
-
1
Start on Northwest Byron Street
1106 ft · 38 sec · Northwest Byron Street
-
2
At the end of the road, turn left onto Silverdale Way Northwest
2719 ft · 1 min · Silverdale Way Northwest
-
3
Enter the roundabout and take exit 1 toward Northwest Newberry Hill Road
26 m · 1 sec · Northwest Newberry Hill Road
-
4
Exit the roundabout onto Northwest Newberry Hill Road
1412 ft · 34 sec · Northwest Newberry Hill Road
-
5
Take the ramp left toward WA 3 South: Bremerton
1577 ft · 38 sec
-
6
Merge slight left onto State Highway 3 Northwest
6.6 mi · 9 min · State Highway 3 Northwest
-
7
Continue on State Highway 3 West
2.1 mi · 3 min · State Highway 3 West
-
8
Continue on West State Route 16
915 ft · 20 sec · West State Route 16
-
9
Continue on State Highway 16
3.5 mi · 5 min · State Highway 16
-
10
Take the exit slight right toward WA 160 East: Sedgwick Road, Southworth Ferry
1711 ft · 50 sec
-
11
Turn left onto Southwest Sedgwick Road
71 m · 6 sec · Southwest Sedgwick Road
-
12
Continue on Southeast Sedgwick Road
7.3 mi · 14 min · Southeast Sedgwick Road
-
13
At the end of the road, turn right onto Southeast Sedgwick Road
52 m · 5 sec · Southeast Sedgwick Road
-
14
Continue on Southworth Ferry
1310 ft · 2 min · Southworth Ferry
-
15
Turn straight onto Fauntleroy - Southworth Ferry
4.8 mi · 30 min · Fauntleroy - Southworth Ferry
-
16
Continue on Fauntleroy Ferry Terminal
861 ft · 19 sec · Fauntleroy Ferry Terminal
-
17
At the end of the road, turn left onto Fauntleroy Way Southwest
3.7 mi · 11 min · Fauntleroy Way Southwest
-
18
Continue on West Seattle Bridge
2.4 mi · 4 min · West Seattle Bridge
-
19
Take the exit slight left toward I 5 North: Vancouver British Columbia
1899 ft · 46 sec
-
20
Merge slight left
35.7 mi · 45 min
-
21
Take the exit slight right toward WA 528 East: Marysville
1114 ft · 30 sec
-
22
Turn right onto 4th Street
1621 ft · 38 sec · 4th Street
-
23
Turn right onto State Avenue
7 m · 1 sec · State Avenue
-
24
Arrive at your destination
0 m · 1 sec · State Avenue
Car Route Details
A richer read on the saved driving route between Silverdale and Marysville.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 5 North
Merge slight left
35.7 mi · 00h 45m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Chance Light Rain leaving Silverdale and Light Rain Likely near Marysville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Silverdale to Marysville?
The road trip is about 50.7 miles (81.6 km) and usually takes 01h 56m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Seattle is a useful midpoint, sitting about 34.5 miles from Silverdale and 16.2 miles from Marysville.
How much longer is the road route than the straight-line distance?
The direct path is about 37 miles (59.5 km), while the road route adds roughly 13.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 2:36 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $9.37 one way or $18.73 round trip. Estimated CO2 is about 15.9 kg one way.
What should you check before leaving?
Before you leave, expect Chance Light Rain around Silverdale and Light Rain Likely near Marysville.
Stop Ideas Near Seattle
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Tukwila Community Center
Renton City Human Services
Renton City Hall
Renton Police Department
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Seattle.
King Street Station
Seattle (Ferry - Pier 69), Washington
Tukwila station
Edmonds station
Flight Path Map
This map shows the direct air route between Silverdale and Marysville. Straight-line distance: 36.99 mi (59.53 km).
#1 Silverdale
Census designated place in Kitsap County, Washington, USA
| Population | 19,204 |
| Coordinates | 47.6445400, -122.6948700 |
| Altitude | 3 |
| Country | United States |
#2 Marysville
The most populous city in Snohomish County, Washington.
| Population | 71,392 |
| Coordinates | 48.0517600, -122.1770800 |
| Altitude | 6 |
| Country | United States |
End: State Avenue (-122.177018, 48.05176)
Estimated Travel Time
Distance: 82 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 41m |
| 40 mph (64.37 km/h) | 01h 16m |
| 50 mph (80.47 km/h) | 01h 00m |
| 60 mph (96.56 km/h) | 00h 50m |
| 70 mph (112.65 km/h) | 00h 43m |
| 80 mph (129 km/h) | 00h 37m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $5.23 | $9.37 | $18.73 |
| Mid-grade | $5.57 | $9.96 | $19.93 |
| Premium | $5.77 | $10.33 | $20.66 |
| Diesel | $5.47 | $9.79 | $19.57 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Washington · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.