How far is Marysville, WA from Silverdale, WA?
The driving distance from Marysville, WA to Silverdale, WA is about 68.5 miles (110.3 km), with a travel time of about 02h 07m by car.
- The straight-line flight distance is about 37 miles (59.5 km).
- For a round trip, plan for roughly 04h 15m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 07m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
The eighteenth most populous city in the United States and the center of the Seattle metropolitan area.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Light Rain Likely
Chance Light Rain
Driving Route Map
The map below follows the saved road route between Marysville and Silverdale.
Turn-by-Turn Driving Directions
Step-by-step road directions between Marysville and Silverdale.
-
1
Start on State Avenue
2860 ft · 1 min · State Avenue
-
2
Enter the roundabout and take exit 1 toward State Route 529
21 m · 1 sec · State Route 529
-
3
Exit the roundabout onto State Route 529
31 m · 2 sec · State Route 529
-
4
Take the ramp straight toward I 5
1551 ft · 38 sec
-
5
Merge slight left
34.9 mi · 44 min
-
6
Take the exit slight right toward West Seattle Bridge, Columbian Way
784 ft · 19 sec
-
7
Keep slight right to continue on Spokane Street, West Seattle Bridge
2068 ft · 50 sec
-
8
Continue on West Seattle Bridge
2.2 mi · 4 min · West Seattle Bridge
-
9
Continue on Fauntleroy Way Southwest
3.7 mi · 11 min · Fauntleroy Way Southwest
-
10
Keep slight right to continue on Southwest Barton Street
52 m · 3 sec · Southwest Barton Street
-
11
Turn slight right onto Fauntleroy Ferry Terminal
718 ft · 12 sec · Fauntleroy Ferry Terminal
-
12
Turn straight onto Fauntleroy - Southworth Ferry
4.8 mi · 30 min · Fauntleroy - Southworth Ferry
-
13
Continue on Southworth Ferry
1433 ft · 2 min · Southworth Ferry
-
14
Continue on Southeast Sedgwick Road
7.2 mi · 14 min · Southeast Sedgwick Road
-
15
Take the ramp right toward WA 16 West: Bremerton
1567 ft · 38 sec
-
16
Merge slight left onto State Highway 16 Southwest
3.7 mi · 5 min · State Highway 16 Southwest
-
17
Continue on State Highway 3 West
2 mi · 3 min · State Highway 3 West
-
18
Continue on State Highway 3 Northwest
6.6 mi · 8 min · State Highway 3 Northwest
-
19
Take the exit slight right toward Newberry Hill Road
1829 ft · 47 sec
-
20
Turn right onto Northwest Newberry Hill Road
858 ft · 17 sec · Northwest Newberry Hill Road
-
21
Enter the roundabout and take exit 2 toward Silverdale Way Northwest
43 m · 2 sec · Silverdale Way Northwest
-
22
Exit the roundabout onto Silverdale Way Northwest
2719 ft · 1 min · Silverdale Way Northwest
-
23
Turn right onto Northwest Byron Street
1106 ft · 32 sec · Northwest Byron Street
-
24
Arrive at your destination
0 m · 1 sec · Northwest Byron Street
Car Route Details
A richer read on the saved driving route between Marysville and Silverdale.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 5
Merge slight left
34.9 mi · 00h 44m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Light Rain Likely leaving Marysville and Chance Light Rain near Silverdale.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Marysville to Silverdale?
The road trip is about 68.5 miles (110.3 km) and usually takes 02h 07m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Seattle is a useful midpoint, sitting about 34.2 miles from Marysville and 34.3 miles from Silverdale.
How much longer is the road route than the straight-line distance?
The direct path is about 37 miles (59.5 km), while the road route adds roughly 31.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 2:14 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $12.66 one way or $25.33 round trip. Estimated CO2 is about 21.5 kg one way.
What should you check before leaving?
Before you leave, expect Light Rain Likely around Marysville and Chance Light Rain near Silverdale.
Stop Ideas Near Seattle
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Tukwila Community Center
Renton City Human Services
Renton City Hall
Renton Police Department
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Seattle.
King Street Station
Seattle (Ferry - Pier 69), Washington
Tukwila station
Edmonds station
Flight Path Map
This map shows the direct air route between Marysville and Silverdale. Straight-line distance: 36.99 mi (59.53 km).
#1 Marysville
The most populous city in Snohomish County, Washington.
| Population | 71,392 |
| Coordinates | 48.0517600, -122.1770800 |
| Altitude | 6 |
| Country | United States |
#2 Silverdale
Census designated place in Kitsap County, Washington, USA
| Population | 19,204 |
| Coordinates | 47.6445400, -122.6948700 |
| Altitude | 3 |
| Country | United States |
End: Silverdale (-122.69487, 47.64454)
Estimated Travel Time
Distance: 110 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 17m |
| 40 mph (64.37 km/h) | 01h 42m |
| 50 mph (80.47 km/h) | 01h 22m |
| 60 mph (96.56 km/h) | 01h 08m |
| 70 mph (112.65 km/h) | 00h 58m |
| 80 mph (129 km/h) | 00h 51m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $5.23 | $12.66 | $25.33 |
| Mid-grade | $5.57 | $13.47 | $26.94 |
| Premium | $5.77 | $13.97 | $27.93 |
| Diesel | $5.47 | $13.23 | $26.46 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Washington · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.