How far is Sequim, WA from Kent, WA?

The driving distance from Sequim, WA to Kent, WA is about 107 miles (172.2 km), with a travel time of about 01h 58m by car.

  • The straight-line flight distance is about 62.9 miles (101.2 km).
  • For a round trip, plan for roughly 03h 57m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
106.99 mi
01h 58m
Flight
62.9 mi
101.22 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Sequim.

Flight Distance

Direct air line
62.9 mi
Kilometers
101.22 km
Flight Time
00h 07m

Driving Distance

Road route
106.99 mi
Kilometers
172.18 km
Drive Time
01h 58m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 01h 58m.

Arrival Snapshot
Arrive in Kent
Mon, Jun 1, 10:03 PM PDT
Return by in Sequim
Tue, Jun 2, 12:02 AM PDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Sequim
2026-06-01T20:04
Arrive Kent
Mon, Jun 1, 10:03 PM PDT
Route Timing
01h 58m
One way by road
Best Departure Window
8:00 AM to 10:00 AM PDT
Aim for a morning departure
Arrive between
9:59 AM to 11:59 AM PDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
2:32 PM PDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Sequim
9:30 PM PDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Silverdale
WA

Census designated place in Kitsap County, Washington, USA

From Sequim
53.4 mi
00h 59m
To Kent
53.5 mi
00h 59m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
74°F
This Afternoon

Partly Sunny

Starts
Mon, Jun 1 5:00 PM PDT
Wind
2 mph NW
Destination
77°F
This Afternoon

Mostly Sunny

Starts
Mon, Jun 1 3:00 PM PDT
Wind
8 mph N

Driving Route Map

The map below follows the saved road route between Sequim and Kent.

Turn-by-Turn Driving Directions

Step-by-step road directions between Sequim and Kent.

  1. 1

    Start on South Sequim Avenue

    2558 ft · 1 min · South Sequim Avenue

  2. 2

    Take the ramp left

    1399 ft · 38 sec

  3. 3

    Merge slight left

    19.9 mi · 28 min

  4. 4

    Take the exit right

    8.7 mi · 11 min

  5. 5

    Keep slight left to continue on State Route 104

    700 ft · 10 sec · State Route 104

  6. 6

    Enter the roundabout and take exit 1 toward State Route 104

    31 m · 1 sec · State Route 104

  7. 7

    Exit the roundabout onto State Route 104

    4.9 mi · 6 min · State Route 104

  8. 8

    Enter the roundabout and take exit 2 toward State Route 104

    36 m · 2 sec · State Route 104

  9. 9

    Exit the roundabout onto State Route 104

    791 ft · 17 sec · State Route 104

  10. 10

    Continue on Hood Canal Floating Bridge

    1.6 mi · 3 min · Hood Canal Floating Bridge

  11. 11

    Take the exit slight right

    617 ft · 13 sec

  12. 12

    Merge slight left onto State Highway 3 Northeast

    23.2 mi · 31 min · State Highway 3 Northeast

  13. 13

    Continue on State Highway 3 West

    2.1 mi · 3 min · State Highway 3 West

  14. 14

    Continue on West State Route 16

    915 ft · 20 sec · West State Route 16

  15. 15

    Continue on State Highway 16

    26.5 mi · 34 min · State Highway 16

  16. 16

    Keep slight left

    1.5 km · 2 min

  17. 17

    Keep slight left to continue on I 5 North: Seattle

    683 ft · 17 sec

  18. 18

    Merge slight left

    1356 ft · 19 sec

  19. 19

    Keep slight right

    8.2 mi · 10 min

  20. 20

    Take the exit slight right toward WA 18 East: Auburn, Muckleshoot Reservation

    2644 ft · 1 min

  21. 21

    Merge slight left onto State Route 18

    2.4 mi · 3 min · State Route 18

  22. 22

    Take the exit slight right toward WA 167 North: Kent, Renton

    988 ft · 24 sec

  23. 23

    Keep slight right to continue on WA 167 North: Kent, Renton

    2850 ft · 1 min

  24. 24

    Merge slight left onto Valley Freeway

    4.8 mi · 6 min · Valley Freeway

  25. 25

    Take the exit slight right toward WA 516: Des Moines, Willis Street

    1449 ft · 45 sec

  26. 26

    Turn right onto West Willis Street

    1314 ft · 30 sec · West Willis Street

  27. 27

    Enter the roundabout and take exit 3 toward 4th Avenue South

    73 m · 5 sec · 4th Avenue South

  28. 28

    Exit the roundabout onto 4th Avenue South

    984 ft · 32 sec · 4th Avenue South

  29. 29

    Turn right onto West Gowe Street

    643 ft · 25 sec · West Gowe Street

  30. 30

    Turn left onto 2nd Avenue South

    3 m · 1 sec · 2nd Avenue South

  31. 31

    Arrive at your destination

    0 m · 1 sec · 2nd Avenue South

Car Route Details

A richer read on the saved driving route between Sequim and Kent.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
31 steps
9 turns on the saved route
Ramps & Exits
17
5 merges, 12 ramps or exits
Navigation Density
29 / 100 mi
Decision points by distance
Main Roads
South Sequim Avenue
29.4 mi · 27%
State Highway 16
27.5 mi · 26%
State Highway 3 Northeast
23.2 mi · 22%
I 5 North
8.58 mi · 8%
State Route 104
5.21 mi · 5%
Valley Freeway
4.78 mi · 4%
Longest Stretch

State Highway 16

Continue on State Highway 16

26.5 mi · 00h 34m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
01h 58m
Day trip friendly
Same-Day Return
03h 58m
Round-trip wheel time
Road vs Air
+44.1 mi
62.9 mi direct line
Halfway Stop
Silverdale
00h 59m from Sequim
Leave By
2:32 PM PDT
Morning start is best
Weather Watch

Partly Sunny leaving Sequim and Mostly Sunny near Kent.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Sequim to Kent?

The road trip is about 107 miles (172.2 km) and usually takes 01h 58m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Silverdale is a useful midpoint, sitting about 53.4 miles from Sequim and 53.5 miles from Kent.

How much longer is the road route than the straight-line distance?

The direct path is about 62.9 miles (101.2 km), while the road route adds roughly 44.1 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 2:32 PM PDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $19.78 one way or $39.56 round trip. Estimated CO2 is about 33.6 kg one way.

What should you check before leaving?

Before you leave, expect Partly Sunny around Sequim and Mostly Sunny near Kent.

Stop Ideas Near Silverdale

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Silverdale, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Silverdale.

OTHER

Seattle (Ferry - Pier 69), Washington

26 mi away
2701 Alaskan Way
RAIL

King Street Station

28 mi away
303 South Jackson Street
RAIL

Edmonds station

30 mi away
211 Railroad Ave.
RAIL

Tukwila station

40 mi away
7301 South 158th St.

Flight Path Map

This map shows the direct air route between Sequim and Kent. Straight-line distance: 62.9 mi (101.22 km).

Sequim

#1 Sequim

City in Clallam County, Washington, United States

Population7,780
Coordinates48.0796300, -123.1023400
Altitude55
CountryUnited States
Kent

#2 Kent

The fourth most populous city in King County, Washington.

Population130,676
Coordinates47.3809300, -122.2348400
Altitude13
CountryUnited States
Start: South Sequim Avenue (-123.102342, 48.079632)
End: West Gowe Street (-122.234827, 47.380901)

Estimated Travel Time

Distance: 172 km by road

SpeedTime
30 mph (48.3 km/h)03h 33m
40 mph (64.37 km/h)02h 40m
50 mph (80.47 km/h)02h 08m
60 mph (96.56 km/h)01h 46m
70 mph (112.65 km/h)01h 31m
80 mph (129 km/h)01h 20m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
3.78 gal
14.29 L · about $19.78
Round trip
$39.56
7.56 gal · 28.58 L
Estimated CO2
33.6 kg one way
Round trip: 67.2 kg / 148 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $5.23 $19.78 $39.56
Mid-grade $5.57 $21.04 $42.09
Premium $5.77 $21.81 $43.63
Diesel $5.47 $20.67 $41.33

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Washington · Jun 02, 2026

There is no time difference between Sequim and Kent. The current time is 20:04:11.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.