How far is Kent, WA from Sequim, WA?

The driving distance from Kent, WA to Sequim, WA is about 106.6 miles (171.6 km), with a travel time of about 02h 26m by car.

  • The straight-line flight distance is about 62.9 miles (101.2 km).
  • For a round trip, plan for roughly 04h 52m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
106.6 mi
02h 26m
Flight
62.9 mi
101.22 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Kent.

Flight Distance

Direct air line
62.9 mi
Kilometers
101.22 km
Flight Time
00h 07m

Driving Distance

Road route
106.6 mi
Kilometers
171.56 km
Drive Time
02h 26m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 26m.

Arrival Snapshot
Arrive in Sequim
Mon, Jun 1, 11:09 PM PDT
Return by in Kent
Tue, Jun 2, 1:35 AM PDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Kent
2026-06-01T20:43
Arrive Sequim
Mon, Jun 1, 11:09 PM PDT
Route Timing
02h 26m
One way by road
Best Departure Window
8:00 AM to 10:00 AM PDT
Aim for a morning departure
Arrive between
10:26 AM to 12:26 PM PDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
1:38 PM PDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Kent
9:30 PM PDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Silverdale
WA

Census designated place in Kitsap County, Washington, USA

From Kent
53.3 mi
01h 13m
To Sequim
53.4 mi
01h 13m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
77°F
This Afternoon

Mostly Sunny

Starts
Mon, Jun 1 3:00 PM PDT
Wind
8 mph N
Destination
74°F
This Afternoon

Partly Sunny

Starts
Mon, Jun 1 5:00 PM PDT
Wind
2 mph NW

Driving Route Map

The map below follows the saved road route between Kent and Sequim.

Turn-by-Turn Driving Directions

Step-by-step road directions between Kent and Sequim.

  1. 1

    Start on 2nd Avenue South

    3 m · 4 sec · 2nd Avenue South

  2. 2

    Turn right onto West Gowe Street

    643 ft · 25 sec · West Gowe Street

  3. 3

    Turn left onto 4th Avenue South

    829 ft · 24 sec · 4th Avenue South

  4. 4

    Turn slight right

    56 m · 7 sec

  5. 5

    Turn straight onto West Willis Street

    1972 ft · 53 sec · West Willis Street

  6. 6

    Turn left onto WA 167 South: Auburn

    1623 ft · 44 sec

  7. 7

    Merge slight left onto Valley Freeway

    4.4 mi · 6 min · Valley Freeway

  8. 8

    Take the exit slight right toward WA 18 West: Federal Way

    1.6 km · 2 min

  9. 9

    Merge slight left onto State Route 18

    1.5 mi · 2 min · State Route 18

  10. 10

    Take the exit slight right toward I 5: Seattle, Tacoma

    2980 ft · 1 min

  11. 11

    Keep slight left to continue on I 5 South, WA 161: Enchanted Parkway South, Tacoma

    3094 ft · 1 min

  12. 12

    Keep slight left to continue on I 5 South: Tacoma

    1297 ft · 32 sec

  13. 13

    Merge slight left

    7.2 mi · 9 min

  14. 14

    Keep slight right

    1.3 mi · 2 min

  15. 15

    Take the exit slight right toward WA 16 West: Gig Harbor, Bremerton

    3005 ft · 1 min

  16. 16

    Keep slight left to continue on WA 16 West: Union Avenue

    2518 ft · 46 sec

  17. 17

    Merge slight left

    28.3 mi · 37 min

  18. 18

    Continue on State Highway 3 Northwest

    23.3 mi · 31 min · State Highway 3 Northwest

  19. 19

    Turn left onto Hood Canal Bridge

    617 ft · 13 sec · Hood Canal Bridge

  20. 20

    Continue on Hood Canal Floating Bridge

    1.5 mi · 3 min · Hood Canal Floating Bridge

  21. 21

    Continue on State Route 104

    794 ft · 17 sec · State Route 104

  22. 22

    Enter the roundabout and take exit 2 toward State Route 104

    36 m · 2 sec · State Route 104

  23. 23

    Exit the roundabout onto State Route 104

    4.9 mi · 6 min · State Route 104

  24. 24

    Enter the roundabout and take exit 2 toward State Route 104

    43 m · 2 sec · State Route 104

  25. 25

    Exit the roundabout onto State Route 104

    8.7 mi · 11 min · State Route 104

  26. 26

    Keep slight right to continue on State Highway 104

    2101 ft · 30 sec · State Highway 104

  27. 27

    Merge slight left onto Olympic Highway

    19.6 mi · 28 min · Olympic Highway

  28. 28

    Take the exit slight right

    1419 ft · 42 sec

  29. 29

    Turn right onto South Sequim Avenue

    2153 ft · 47 sec · South Sequim Avenue

  30. 30

    Arrive at your destination

    0 m · 1 sec · South Sequim Avenue

Car Route Details

A richer read on the saved driving route between Kent and Sequim.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
30 steps
11 turns on the saved route
Ramps & Exits
13
5 merges, 8 ramps or exits
Navigation Density
28.1 / 100 mi
Decision points by distance
Main Roads
WA 16 West
29.3 mi · 28%
State Highway 3 Northwest
23.3 mi · 22%
Olympic Highway
19.9 mi · 19%
State Route 104
13.8 mi · 13%
I 5 South
9.37 mi · 9%
Valley Freeway
4.44 mi · 4%
Longest Stretch

WA 16 West

Merge slight left

28.3 mi · 00h 37m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 26m
Day trip friendly
Same-Day Return
04h 52m
Round-trip wheel time
Road vs Air
+43.7 mi
62.9 mi direct line
Halfway Stop
Silverdale
01h 13m from Kent
Leave By
1:38 PM PDT
Morning start is best
Weather Watch

Mostly Sunny leaving Kent and Partly Sunny near Sequim.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Kent to Sequim?

The road trip is about 106.6 miles (171.6 km) and usually takes 02h 26m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Silverdale is a useful midpoint, sitting about 53.3 miles from Kent and 53.4 miles from Sequim.

How much longer is the road route than the straight-line distance?

The direct path is about 62.9 miles (101.2 km), while the road route adds roughly 43.7 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 1:38 PM PDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $19.68 one way or $39.35 round trip. Estimated CO2 is about 33.4 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Kent and Partly Sunny near Sequim.

Stop Ideas Near Silverdale

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Silverdale, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Silverdale.

OTHER

Seattle (Ferry - Pier 69), Washington

26 mi away
2701 Alaskan Way
RAIL

King Street Station

28 mi away
303 South Jackson Street
RAIL

Edmonds station

30 mi away
211 Railroad Ave.
RAIL

Tukwila station

40 mi away
7301 South 158th St.

Flight Path Map

This map shows the direct air route between Kent and Sequim. Straight-line distance: 62.9 mi (101.22 km).

Kent

#1 Kent

The fourth most populous city in King County, Washington.

Population130,676
Coordinates47.3809300, -122.2348400
Altitude13
CountryUnited States
Sequim

#2 Sequim

City in Clallam County, Washington, United States

Population7,780
Coordinates48.0796300, -123.1023400
Altitude55
CountryUnited States
Start: Kent (-122.23484, 47.38093)
End: Sequim (-123.10234, 48.07963)

Estimated Travel Time

Distance: 172 km by road

SpeedTime
30 mph (48.3 km/h)03h 33m
40 mph (64.37 km/h)02h 39m
50 mph (80.47 km/h)02h 07m
60 mph (96.56 km/h)01h 46m
70 mph (112.65 km/h)01h 31m
80 mph (129 km/h)01h 19m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
3.76 gal
14.24 L · about $19.68
Round trip
$39.35
7.52 gal · 28.48 L
Estimated CO2
33.4 kg one way
Round trip: 66.8 kg / 147 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $5.23 $19.68 $39.35
Mid-grade $5.57 $20.93 $41.86
Premium $5.77 $21.70 $43.40
Diesel $5.47 $20.56 $41.11

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Washington · Jun 02, 2026

There is no time difference between Kent and Sequim. The current time is 20:43:44.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.