How far is Riverside, MI from Sterling Heights, MI?

The driving distance from Riverside, MI to Sterling Heights, MI is about 195.2 miles (314.1 km), with a travel time of about 03h 08m by car.

  • The straight-line flight distance is about 173.3 miles (278.9 km).
  • For a round trip, plan for roughly 06h 17m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
195.16 mi
03h 08m
Flight
173.28 mi
278.87 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Riverside.

Flight Distance

Direct air line
173.28 mi
Kilometers
278.87 km
Flight Time
00h 20m

Driving Distance

Road route
195.16 mi
Kilometers
314.08 km
Drive Time
03h 08m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 03h 08m.

Arrival Snapshot
Arrive in Sterling Heights
Sat, Apr 18, 8:27 AM EDT
Return by in Riverside
Sat, Apr 18, 11:36 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Riverside
2026-04-18T05:18
Arrive Sterling Heights
Sat, Apr 18, 8:27 AM EDT
Route Timing
03h 08m
One way by road
Best Departure Window
6:00 AM to 8:00 AM EDT
Leave early for more breathing room
Arrive between
9:09 AM to 11:09 AM EDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
10:42 AM EDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Riverside
9:00 PM EDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Parma
MI

Human settlement in Jackson County, Michigan, United States of America

From Riverside
99.4 mi
01h 34m
To Sterling Heights
95.8 mi
01h 34m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
59°F
Saturday

Showers And Thunderstorms

Starts
Sat, Apr 18 6:00 AM EDT
Wind
15 mph SW
Destination
73°F
Saturday

Showers And Thunderstorms

Starts
Sat, Apr 18 6:00 AM EDT
Wind
8 to 16 mph SSW

Driving Route Map

The map below follows the saved road route between Riverside and Sterling Heights.

Turn-by-Turn Driving Directions

Step-by-step road directions between Riverside and Sterling Heights.

  1. 1

    Start on Riverside Road

    1341 ft · 39 sec · Riverside Road

  2. 2

    Turn right onto Coloma Road

    129 m · 13 sec · Coloma Road

  3. 3

    Take the ramp left

    1153 ft · 28 sec

  4. 4

    Merge slight left

    3.3 mi · 4 min

  5. 5

    Take the exit slight left toward I-94 EAST: Detroit

    1 mi · 2 min

  6. 6

    Merge slight left onto I 94: Detroit

    136.8 mi · 2 hr 27 min

  7. 7

    Keep slight left to continue on M 14: Plymouth

    4.7 mi · 5 min

  8. 8

    Keep right to continue on M 14 East, US 23 South: Plymouth

    2.4 mi · 3 min

  9. 9

    Keep slight left to continue on M 14 East: Plymouth, Livonia

    15.1 mi · 16 min

  10. 10

    Continue straight

    9.2 mi · 10 min

  11. 11

    Keep slight left to continue on Jeffries Freeway (Express)

    5.3 mi · 6 min · Jeffries Freeway (Express)

  12. 12

    Take the exit slight right toward Davison Avenue

    1519 ft · 37 sec

  13. 13

    Continue straight

    2.2 mi · 5 min

  14. 14

    Continue on Davison Freeway

    1.3 mi · 2 min · Davison Freeway

  15. 15

    Take the exit slight right toward I 75: Flint, Toledo

    2332 ft · 56 sec

  16. 16

    Keep slight left to continue on I 75 North: Flint

    2346 ft · 56 sec

  17. 17

    Merge slight left onto North Walter P. Chrysler Freeway

    4.6 mi · 5 min · North Walter P. Chrysler Freeway

  18. 18

    Take the exit slight right toward I 696: Lansing, Port Huron

    1036 ft · 25 sec

  19. 19

    Keep slight right to continue on I-75 North to I-696 East

    2136 ft · 52 sec · I-75 North to I-696 East

  20. 20

    Continue on Walter P Reuther Freeway

    3.1 mi · 3 min · Walter P Reuther Freeway

  21. 21

    Take the exit slight right toward Mound Road

    1569 ft · 38 sec · I-696 East

  22. 22

    Keep slight left to continue on I-696 East to Northbound Mound Road

    1.2 km · 2 min · I-696 East to Northbound Mound Road

  23. 23

    Turn straight onto Mound Road

    5.9 mi · 9 min · Mound Road

  24. 24

    Turn right onto 17 Mile Road

    1.6 km · 2 min · 17 Mile Road

  25. 25

    Arrive at your destination

    0 m · 1 sec · 17 Mile Road

Car Route Details

A richer read on the saved driving route between Riverside and Sterling Heights.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
25 steps
3 turns on the saved route
Ramps & Exits
9
3 merges, 6 ramps or exits
Navigation Density
12.8 / 100 mi
Decision points by distance
Main Roads
I 94
137 mi · 70%
M 14 East
26.7 mi · 14%
Mound Road
6.02 mi · 3%
Jeffries Freeway (Express)
5.32 mi · 3%
M 14
4.69 mi · 2%
North Walter P. Chrysler Freeway
4.6 mi · 2%
Longest Stretch

I 94

Merge slight left onto I 94: Detroit

137 mi · 02h 27m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
03h 08m
Long day trip
Same-Day Return
06h 18m
Round-trip wheel time
Road vs Air
+21.9 mi
173.3 mi direct line
Halfway Stop
Parma
01h 34m from Riverside
Leave By
10:42 AM EDT
Early departure recommended
Weather Watch

Showers And Thunderstorms leaving Riverside and Showers And Thunderstorms near Sterling Heights.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Riverside to Sterling Heights?

The road trip is about 195.2 miles (314.1 km) and usually takes 03h 08m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Parma is a useful midpoint, sitting about 99.4 miles from Riverside and 95.8 miles from Sterling Heights.

How much longer is the road route than the straight-line distance?

The direct path is about 173.3 miles (278.9 km), while the road route adds roughly 21.9 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 10:42 AM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $25.98 one way or $51.96 round trip. Estimated CO2 is about 61.2 kg one way.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms around Riverside and Showers And Thunderstorms near Sterling Heights.

Stop Ideas Near Parma

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Parma, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Parma.

RAIL

Albion station

13 mi away
300 North Eaton St.
RAIL

Jackson station

16 mi away
501 E. Michigan Ave.
RAIL

Battle Creek Transportation Center

49 mi away
104 Capital Ave. S.W.
RAIL

East Lansing station

52 mi away
1240 South Harrison Road

Flight Path Map

This map shows the direct air route between Riverside and Sterling Heights. Straight-line distance: 173.28 mi (278.87 km).

Photo coming soon

#1 Riverside

Township of Michigan

Population1,203
Coordinates42.1833700, -86.3828000
Altitude196
CountryUnited States
Sterling Heights

#2 Sterling Heights

The second most populous city in Macomb County, Michigan.

Population131,709
Coordinates42.5803100, -83.0302000
Altitude187
CountryUnited States
Start: Riverside Road (-86.382654, 42.183166)
End: 17 Mile Road (-83.030204, 42.580347)

Estimated Travel Time

Distance: 314 km by road

SpeedTime
30 mph (48.3 km/h)06h 30m
40 mph (64.37 km/h)04h 52m
50 mph (80.47 km/h)03h 54m
60 mph (96.56 km/h)03h 15m
70 mph (112.65 km/h)02h 47m
80 mph (129 km/h)02h 26m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
6.89 gal
26.07 L · about $25.98
Round trip
$51.96
13.78 gal · 52.14 L
Estimated CO2
61.2 kg one way
Round trip: 122.5 kg / 270 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $25.98 $51.96
Mid-grade $4.25 $29.30 $58.61
Premium $4.65 $32.07 $64.13
Diesel $5.30 $36.54 $73.09

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Michigan · Apr 18, 2026

There is no time difference between Riverside and Sterling Heights. The current time is 05:18:42.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.