How far is Mitchell, IN from Portage, IN?

The driving distance from Mitchell, IN to Portage, IN is about 233.4 miles (375.7 km), with a travel time of about 03h 59m by car.

  • The straight-line flight distance is about 199.9 miles (321.7 km).
  • For a round trip, plan for roughly 07h 59m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
233.46 mi
03h 59m
Flight
199.91 mi
321.72 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Mitchell.

Flight Distance

Direct air line
199.91 mi
Kilometers
321.72 km
Flight Time
00h 24m

Driving Distance

Road route
233.46 mi
Kilometers
375.72 km
Drive Time
03h 59m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 03h 59m.

Arrival Snapshot
Arrive in Portage
Wed, Apr 22, 11:39 PM CDT
Return by in Mitchell
Thu, Apr 23, 4:38 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Mitchell
2026-04-22T20:39
Arrive Portage
Thu, Apr 23, 12:39 AM EDT
Route Timing
03h 59m
One way by road
Best Departure Window
6:00 AM to 8:00 AM EDT
Leave early for more breathing room
Arrive between
9:00 AM to 11:00 AM CDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
9:00 AM EDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Mitchell
9:00 PM EDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Thorntown
IN

City in Boone County, Indiana, United States of America

From Mitchell
117.6 mi
01h 59m
To Portage
115.8 mi
01h 59m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
77°F
Wednesday

Isolated Rain Showers then Mostly Sunny

Starts
Wed, Apr 22 6:00 AM EDT
Wind
7 mph WSW
Destination
66°F
Wednesday

Mostly Sunny

Starts
Wed, Apr 22 6:00 AM CDT
Wind
5 mph NNW

Driving Route Map

The map below follows the saved road route between Mitchell and Portage.

Turn-by-Turn Driving Directions

Step-by-step road directions between Mitchell and Portage.

  1. 1

    Start on West Main Street

    1.4 km · 2 min · West Main Street

  2. 2

    Turn right

    28.3 mi · 35 min

  3. 3

    Merge slight right

    47.6 mi · 53 min

  4. 4

    Take the exit slight left toward I 465 West, I 74 West: Peoria

    1.4 mi · 3 min

  5. 5

    Merge slight left

    9.2 mi · 11 min

  6. 6

    Keep slight left

    3.9 mi · 5 min

  7. 7

    Take the exit slight left toward I 65 North: Chicago

    1.1 mi · 2 min

  8. 8

    Merge slight right

    17.9 mi · 20 min

  9. 9

    Take the exit slight right toward US 52 West

    1281 ft · 16 sec

  10. 10

    Keep slight left

    786 ft · 10 sec

  11. 11

    Merge slight left

    117.5 mi · 2 hr 8 min

  12. 12

    Take the exit slight right toward I 80 East, I 94 East, US 6 East: Toledo, Detroit

    1.4 km · 1 min

  13. 13

    Keep slight right to continue on Central Avenue

    1760 ft · 38 sec

  14. 14

    Turn right onto Central Avenue

    4.3 mi · 9 min · Central Avenue

  15. 15

    Continue on Central Avenue

    1.4 mi · 3 min · Central Avenue

  16. 16

    Arrive at your destination

    0 m · 1 sec · Central Avenue

Car Route Details

A richer read on the saved driving route between Mitchell and Portage.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
16 steps
2 turns on the saved route
Ramps & Exits
8
4 merges, 4 ramps or exits
Navigation Density
6.9 / 100 mi
Decision points by distance
Main Roads
US 52 West
118 mi · 51%
West Main Street
48.5 mi · 21%
I 65 North
19 mi · 8%
I 465 West
14.6 mi · 6%
Central Avenue
6.01 mi · 3%
I 80 East
0.87 mi
Longest Stretch

US 52 West

Merge slight left

118 mi · 02h 08m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
03h 59m
Long day trip
Same-Day Return
08h 00m
Round-trip wheel time
Road vs Air
+33.5 mi
199.9 mi direct line
Halfway Stop
Thorntown
01h 59m from Mitchell
Leave By
9:00 AM EDT
Early departure recommended
Weather Watch

Isolated Rain Showers then Mostly Sunny leaving Mitchell and Mostly Sunny near Portage.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Mitchell to Portage?

The road trip is about 233.4 miles (375.7 km) and usually takes 03h 59m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Thorntown is a useful midpoint, sitting about 117.6 miles from Mitchell and 115.8 miles from Portage.

How much longer is the road route than the straight-line distance?

The direct path is about 199.9 miles (321.7 km), while the road route adds roughly 33.5 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 9:00 AM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $31.07 one way or $62.15 round trip. Estimated CO2 is about 73.2 kg one way.

Do you cross a time zone on this route?

Yes. There is about a 1 hour time difference between Mitchell and Portage, so arrival and return times should be read in local time.

What should you check before leaving?

Before you leave, expect Isolated Rain Showers then Mostly Sunny around Mitchell and Mostly Sunny near Portage.

Stop Ideas Near Thorntown

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
These suggestions come from reviewed places and nearby services around Thorntown and the surrounding midpoint area.
Town of Mulberry - Town Hall & Municipal Utilities
Scenic stop 14.1 mi away

Town of Mulberry - Town Hall & Municipal Utilities

Mulberry , IN
123 S Glick St, Mulberry, IN 46058, United States
Park,Municipal corporation,City or town hall,Public library,Water works
Stop photo coming soon
Meeting point 12.8 mi away

Darlington Municipal Utilities

Darlington , IN
222 W Main St, Darlington, IN 47940
Rating 5.0/5 1 reviews City Hall

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Thorntown.

BUS

Crawfordsville (Bus), Indiana

26 mi away
1000 Smith Ave
RAIL

Crawfordsville

27 mi away
Spring and Green Streets
RAIL

Lafayette station

41 mi away
200 North 2nd St.
RAIL

Indianapolis Union Station

56 mi away
350 South Illinois Street

Flight Path Map

This map shows the direct air route between Mitchell and Portage. Straight-line distance: 199.91 mi (321.72 km).

Mitchell

#1 Mitchell

City in Marion Township, Lawrence County, Indiana, United States

Population4,269
Coordinates38.7328300, -86.4736000
Altitude208
CountryUnited States
Portage

#2 Portage

The second most populous city in Porter County, Indiana.

Population90,543
Coordinates41.5758700, -87.1761500
Altitude194
CountryUnited States
Start: West Main Street (-86.473578, 38.732772)
End: Central Avenue (-87.17615, 41.575874)

Estimated Travel Time

Distance: 376 km by road

SpeedTime
30 mph (48.3 km/h)07h 46m
40 mph (64.37 km/h)05h 50m
50 mph (80.47 km/h)04h 40m
60 mph (96.56 km/h)03h 53m
70 mph (112.65 km/h)03h 20m
80 mph (129 km/h)02h 54m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
8.24 gal
31.18 L · about $31.07
Round trip
$62.15
16.48 gal · 62.36 L
Estimated CO2
73.2 kg one way
Round trip: 146.5 kg / 323 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $31.07 $62.15
Mid-grade $4.25 $35.04 $70.09
Premium $4.65 $38.35 $76.70
Diesel $5.30 $43.70 $87.41

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Indiana · Apr 23, 2026

Please keep in mind that there is a 1 hour time gap between Mitchell, IN and Portage, IN. The current time in Mitchell is 20:39:47, although it is 19:39:47 in Portage.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.