How far is Milbank, SD from Mitchell, SD?
The driving distance from Milbank, SD to Mitchell, SD is about 183.7 miles (295.7 km), with a travel time of about 02h 44m by car.
- The straight-line flight distance is about 124.9 miles (201 km).
- For a round trip, plan for roughly 05h 28m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 44m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Township in Perkins County, South Dakota
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Milbank and Mitchell.
Turn-by-Turn Driving Directions
Step-by-step road directions between Milbank and Mitchell.
-
1
Start on East 4th Avenue
1333 ft · 27 sec · East 4th Avenue
-
2
Turn left onto South Dakota Street
1.6 km · 1 min · South Dakota Street
-
3
Continue on SD Highway 15
18.8 mi · 28 min · SD Highway 15
-
4
Turn right onto US Highway 212
4.8 mi · 7 min · US Highway 212
-
5
Turn left onto SD Highway 15
9.1 mi · 13 min · SD Highway 15
-
6
Continue on 3rd Avenue North
1.1 mi · 2 min · 3rd Avenue North
-
7
Continue on SD Highway 15
11.9 mi · 14 min · SD Highway 15
-
8
Turn right onto SD Highway 28
4 mi · 6 min · SD Highway 28
-
9
Take the ramp left
1569 ft · 38 sec
-
10
Merge slight left
66.1 mi · 1 hr 2 min
-
11
Take the exit slight right toward Interstate 90 West: Rapid City
2517 ft · 1 min
-
12
Merge slight left
63.7 mi · 1 hr
-
13
Take the exit slight right toward Mitchell
1406 ft · 34 sec
-
14
Keep slight right
56 m · 5 sec
-
15
Turn straight onto South Burr Street
1.2 km · 1 min · South Burr Street
-
16
Turn left onto East Havens Avenue
2763 ft · 1 min · East Havens Avenue
-
17
Turn slight right
79 m · 10 sec
-
18
Turn straight onto South Sanborn Boulevard
2494 ft · 1 min · South Sanborn Boulevard
-
19
Turn left onto West 1st Avenue
10 m · 1 sec · West 1st Avenue
-
20
Arrive at your destination
0 m · 1 sec · West 1st Avenue
Car Route Details
A richer read on the saved driving route between Milbank and Mitchell.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
SD Highway 28
Merge slight left
66.1 mi · 01h 02m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny leaving Milbank and Mostly Sunny near Mitchell.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Milbank to Mitchell?
The road trip is about 183.7 miles (295.7 km) and usually takes 02h 44m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Lone Tree is a useful midpoint, sitting about 91.8 miles from Milbank and 92 miles from Mitchell.
How much longer is the road route than the straight-line distance?
The direct path is about 124.9 miles (201 km), while the road route adds roughly 58.8 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 1:02 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $24.44 one way or $48.87 round trip. Estimated CO2 is about 57.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Milbank and Mostly Sunny near Mitchell.
Flight Path Map
This map shows the direct air route between Milbank and Mitchell. Straight-line distance: 124.92 mi (201.04 km).
#1 Milbank
City in and county seat of Grand County, South Dakota, United States
| Population | 3,066 |
| Coordinates | 45.2191300, -96.6356200 |
| Altitude | 351 |
| Country | United States |
#2 Mitchell
City in and county seat of Davison County, South Dakota, United States
| Population | 15,697 |
| Coordinates | 43.7094300, -98.0298000 |
| Altitude | 400 |
| Country | United States |
End: West 1st Avenue (-98.0298, 43.709412)
Estimated Travel Time
Distance: 296 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 06h 07m |
| 40 mph (64.37 km/h) | 04h 35m |
| 50 mph (80.47 km/h) | 03h 40m |
| 60 mph (96.56 km/h) | 03h 03m |
| 70 mph (112.65 km/h) | 02h 37m |
| 80 mph (129 km/h) | 02h 17m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $24.44 | $48.87 |
| Mid-grade | $4.25 | $27.56 | $55.12 |
| Premium | $4.65 | $30.16 | $60.32 |
| Diesel | $5.30 | $34.37 | $68.74 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in South Dakota · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.