How far is City of Baltimore, MD from Sykesville, MD?
The driving distance from City of Baltimore, MD to Sykesville, MD is about 27.3 miles (44 km), with a travel time of about 00h 39m by car.
- The straight-line flight distance is about 19.9 miles (32 km).
- For a round trip, plan for roughly 01h 18m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 39m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Unincorporated community in Howard County, Maryland, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers
Rain Showers
Driving Route Map
The map below follows the saved road route between City of Baltimore and Sykesville.
Turn-by-Turn Driving Directions
Step-by-step road directions between City of Baltimore and Sykesville.
-
1
Start on East Fayette Street
149 m · 23 sec · East Fayette Street
-
2
Turn left onto Saint Paul Street
95 m · 11 sec · Saint Paul Street
-
3
Continue on Light Street
1913 ft · 1 min · Light Street
-
4
Turn right onto East Conway Street
1625 ft · 52 sec · East Conway Street
-
5
Turn left onto Cal Ripken Way
1.1 km · 2 min · Cal Ripken Way
-
6
Keep slight left to continue on I 95 South: Washington
1.2 km · 1 min
-
7
Merge slight left
2.9 mi · 4 min
-
8
Take the exit slight right toward I 695 West: Towson
3248 ft · 1 min
-
9
Merge slight left onto Baltimore Beltway
4.6 mi · 6 min · Baltimore Beltway
-
10
Take the exit slight right toward I 70: Frederick, Local Traffic
951 ft · 23 sec
-
11
Keep slight left to continue on I 70 West: Frederick
1.3 km · 2 min
-
12
Merge slight left
10.8 mi · 12 min
-
13
Take the exit slight right toward MD 32: Clarksville, Sykesville
1802 ft · 38 sec
-
14
Keep slight right to continue on MD 32 North: Sykesville
717 ft · 18 sec
-
15
Turn straight onto Sykesville Road
3.5 mi · 5 min · Sykesville Road
-
16
Turn left onto West Friendship Road
2287 ft · 46 sec · West Friendship Road
-
17
Continue on Main Street
1635 ft · 56 sec · Main Street
-
18
Turn right onto Springfield Avenue
2296 ft · 46 sec · Springfield Avenue
-
19
Arrive at your destination
0 m · 1 sec · Springfield Avenue
Car Route Details
A richer read on the saved driving route between City of Baltimore and Sykesville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
I 70 West
Merge slight left
10.8 mi · 00h 12m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Rain Showers leaving City of Baltimore and Rain Showers near Sykesville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from City of Baltimore to Sykesville?
The road trip is about 27.3 miles (44 km) and usually takes 00h 39m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Ellicott City is a useful midpoint, sitting about 13.7 miles from City of Baltimore and 13.7 miles from Sykesville.
How much longer is the road route than the straight-line distance?
The direct path is about 19.9 miles (32 km), while the road route adds roughly 7.4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:12 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $3.96 one way or $7.93 round trip. Estimated CO2 is about 8.6 kg one way.
What should you check before leaving?
Before you leave, expect Rain Showers around City of Baltimore and Rain Showers near Sykesville.
Flight Path Map
This map shows the direct air route between City of Baltimore and Sykesville. Straight-line distance: 19.85 mi (31.95 km).
#1 City of Baltimore
Independent city in Maryland, United States
| Population | 621,849 |
| Coordinates | 39.2903800, -76.6121900 |
| Altitude | 10 |
| Country | United States |
#2 Sykesville
Town in Carroll County, Maryland, United States
| Population | 3,973 |
| Coordinates | 39.3737100, -76.9677600 |
| Altitude | 166 |
| Country | United States |
End: Sykesville (-76.96776, 39.37371)
Estimated Travel Time
Distance: 44 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 54m |
| 40 mph (64.37 km/h) | 00h 41m |
| 50 mph (80.47 km/h) | 00h 32m |
| 60 mph (96.56 km/h) | 00h 27m |
| 70 mph (112.65 km/h) | 00h 23m |
| 80 mph (129 km/h) | 00h 20m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $3.96 | $7.93 |
| Mid-grade | $4.60 | $4.46 | $8.92 |
| Premium | $4.95 | $4.81 | $9.61 |
| Diesel | $5.98 | $5.80 | $11.60 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.