How far is City of Baltimore, MD from Hancock, MD?
The driving distance from City of Baltimore, MD to Hancock, MD is about 100.8 miles (162.3 km), with a travel time of about 01h 58m by car.
- The straight-line flight distance is about 88.2 miles (142 km).
- For a round trip, plan for roughly 03h 56m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 58m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Frederick County, Maryland, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Sunny
Driving Route Map
The map below follows the saved road route between City of Baltimore and Hancock.
Turn-by-Turn Driving Directions
Step-by-step road directions between City of Baltimore and Hancock.
-
1
Start on East Fayette Street
149 m · 23 sec · East Fayette Street
-
2
Turn left onto Saint Paul Street
95 m · 11 sec · Saint Paul Street
-
3
Continue on Light Street
1913 ft · 1 min · Light Street
-
4
Turn right onto East Conway Street
1625 ft · 52 sec · East Conway Street
-
5
Turn left onto Cal Ripken Way
1.1 km · 2 min · Cal Ripken Way
-
6
Keep slight left to continue on I 95 South: Washington
1.2 km · 1 min
-
7
Merge slight left
2.9 mi · 4 min
-
8
Take the exit slight right toward I 695 West: Towson
3248 ft · 1 min
-
9
Merge slight left onto Baltimore Beltway
4.6 mi · 6 min · Baltimore Beltway
-
10
Take the exit slight right toward I 70: Frederick, Local Traffic
951 ft · 23 sec
-
11
Keep slight left to continue on I 70 West: Frederick
1.3 km · 2 min
-
12
Merge slight left
14.1 mi · 15 min
-
13
Continue straight
11.8 mi · 13 min
-
14
Continue straight
61.7 mi · 1 hr 6 min
-
15
Take the exit slight left toward MD 144: Hancock
2164 ft · 53 sec
-
16
Turn right onto East Main Street
1.5 mi · 4 min · East Main Street
-
17
Turn left onto Taney Alley
7 m · 1 sec · Taney Alley
-
18
Arrive at your destination
0 m · 1 sec · Taney Alley
Car Route Details
A richer read on the saved driving route between City of Baltimore and Hancock.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 70 West
Continue straight
61.7 mi · 01h 06m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny leaving City of Baltimore and Sunny near Hancock.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from City of Baltimore to Hancock?
The road trip is about 100.8 miles (162.3 km) and usually takes 01h 58m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Ballenger Creek is a useful midpoint, sitting about 50.3 miles from City of Baltimore and 50.5 miles from Hancock.
How much longer is the road route than the straight-line distance?
The direct path is about 88.2 miles (142 km), while the road route adds roughly 12.6 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:34 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $14.55 one way or $29.09 round trip. Estimated CO2 is about 31.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around City of Baltimore and Sunny near Hancock.
Stop Ideas Near Ballenger Creek
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Ballenger Creek.
Frederick, MD
Frederick Airport, MD
Harpers Ferry
Hagerstown, MD
Flight Path Map
This map shows the direct air route between City of Baltimore and Hancock. Straight-line distance: 88.22 mi (141.97 km).
#1 City of Baltimore
Independent city in Maryland, United States
| Population | 621,849 |
| Coordinates | 39.2903800, -76.6121900 |
| Altitude | 10 |
| Country | United States |
#2 Hancock
Town in Maryland
| Population | 1,522 |
| Coordinates | 39.6989800, -78.1797300 |
| Altitude | 134 |
| Country | United States |
End: Hancock (-78.17973, 39.69898)
Estimated Travel Time
Distance: 162 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 03h 21m |
| 40 mph (64.37 km/h) | 02h 31m |
| 50 mph (80.47 km/h) | 02h 01m |
| 60 mph (96.56 km/h) | 01h 40m |
| 70 mph (112.65 km/h) | 01h 26m |
| 80 mph (129 km/h) | 01h 15m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $14.55 | $29.09 |
| Mid-grade | $4.60 | $16.37 | $32.74 |
| Premium | $4.95 | $17.64 | $35.27 |
| Diesel | $5.98 | $21.29 | $42.58 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.