How far is City of Baltimore, MD from Crownsville, MD?
The driving distance from City of Baltimore, MD to Crownsville, MD is about 22.1 miles (35.6 km), with a travel time of about 00h 31m by car.
- The straight-line flight distance is about 18.1 miles (29.1 km).
- For a round trip, plan for roughly 01h 03m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 31m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census designated place in Maryland
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers
Rain Showers
Driving Route Map
The map below follows the saved road route between City of Baltimore and Crownsville.
Turn-by-Turn Driving Directions
Step-by-step road directions between City of Baltimore and Crownsville.
-
1
Start on East Fayette Street
1216 ft · 39 sec · East Fayette Street
-
2
Continue on West Fayette Street
2068 ft · 1 min · West Fayette Street
-
3
Turn left onto North Greene Street
1919 ft · 47 sec · North Greene Street
-
4
Continue on Russell Street
1 mi · 2 min · Russell Street
-
5
Turn straight onto Baltimore-Washington Parkway
4.1 mi · 6 min · Baltimore-Washington Parkway
-
6
Take the exit slight right toward I 695 East: Glen Burnie
1158 ft · 28 sec
-
7
Merge slight left onto Baltimore Beltway
1.3 mi · 2 min · Baltimore Beltway
-
8
Take the exit slight left toward I 97 South: Annapolis, Bay Bridge
1.4 km · 1 min
-
9
Continue straight
8.9 mi · 10 min
-
10
Keep slight left to continue on Bay Bridge
2.5 mi · 3 min
-
11
Take the exit slight right toward MD 178: Crownsville
1 mi · 2 min
-
12
Continue on Generals Highway
1 mi · 2 min · Generals Highway
-
13
Turn left onto Lancers Trail
603 ft · 28 sec · Lancers Trail
-
14
Arrive at your destination
0 m · 1 sec · Lancers Trail
Car Route Details
A richer read on the saved driving route between City of Baltimore and Crownsville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
I 97 South
Continue straight
8.87 mi · 00h 10m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Rain Showers leaving City of Baltimore and Rain Showers near Crownsville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from City of Baltimore to Crownsville?
The road trip is about 22.1 miles (35.6 km) and usually takes 00h 31m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Glen Burnie is a useful midpoint, sitting about 11.1 miles from City of Baltimore and 11.1 miles from Crownsville.
How much longer is the road route than the straight-line distance?
The direct path is about 18.1 miles (29.1 km), while the road route adds roughly 4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:26 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $3.19 one way or $6.37 round trip. Estimated CO2 is about 6.9 kg one way.
What should you check before leaving?
Before you leave, expect Rain Showers around City of Baltimore and Rain Showers near Crownsville.
Stop Ideas Near Glen Burnie
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
City of Bowie
Baltimore City Hall
Relay Town Hall
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Glen Burnie.
BWI Rail Station
Pennsylvania Station
New Carrollton station
Kent Island, MD
Flight Path Map
This map shows the direct air route between City of Baltimore and Crownsville. Straight-line distance: 18.11 mi (29.14 km).
#1 City of Baltimore
Independent city in Maryland, United States
| Population | 621,849 |
| Coordinates | 39.2903800, -76.6121900 |
| Altitude | 10 |
| Country | United States |
#2 Crownsville
Census-designated place in Maryland, United Staes
| Population | 1,757 |
| Coordinates | 39.0284400, -76.6013500 |
| Altitude | 38 |
| Country | United States |
End: Crownsville (-76.60135, 39.02844)
Estimated Travel Time
Distance: 36 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 44m |
| 40 mph (64.37 km/h) | 00h 33m |
| 50 mph (80.47 km/h) | 00h 26m |
| 60 mph (96.56 km/h) | 00h 22m |
| 70 mph (112.65 km/h) | 00h 18m |
| 80 mph (129 km/h) | 00h 16m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $3.19 | $6.37 |
| Mid-grade | $4.60 | $3.59 | $7.17 |
| Premium | $4.95 | $3.86 | $7.73 |
| Diesel | $5.98 | $4.66 | $9.33 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.