How far is Blades, DE from Middletown, DE?
The driving distance from Blades, DE to Middletown, DE is about 63.3 miles (101.8 km), with a travel time of about 01h 15m by car.
- The straight-line flight distance is about 56.5 miles (91 km).
- For a round trip, plan for roughly 02h 30m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 15m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Delaware, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Driving Route Map
The map below follows the saved road route between Blades and Middletown.
Turn-by-Turn Driving Directions
Step-by-step road directions between Blades and Middletown.
-
1
Start on South Market Street
29 m · 5 sec · South Market Street
-
2
Turn right onto East High Street
2796 ft · 56 sec · East High Street
-
3
Continue on Concord Road
2359 ft · 49 sec · Concord Road
-
4
Turn left onto Sussex Highway
13.6 mi · 19 min · Sussex Highway
-
5
Continue on South Dupont Highway
21.1 mi · 25 min · South Dupont Highway
-
6
Take the exit slight right toward Wilmington, Delaware Memorial Bridge
555 ft · 9 sec
-
7
Continue on Puncheon Run Connector
2.4 mi · 3 min · Puncheon Run Connector
-
8
Merge slight left onto Korean War Veterans Memorial Highway
2.3 mi · 3 min · Korean War Veterans Memorial Highway
-
9
Keep slight right to continue on Korean War Veterans Memorial Highway
12.9 mi · 15 min · Korean War Veterans Memorial Highway
-
10
Take the exit slight right toward US 13: North Smyrna, Townsend
1414 ft · 40 sec
-
11
Keep slight left
40 m · 5 sec
-
12
Turn left onto South Dupont Parkway
3.7 mi · 5 min · South Dupont Parkway
-
13
Take the exit left toward Summit Bridge Road
4.8 mi · 8 min · Summit Bridge Road
-
14
Continue on South Broad Street
1.5 km · 1 min · South Broad Street
-
15
Turn right onto East Main Street
30 m · 3 sec · East Main Street
-
16
Arrive at your destination
0 m · 1 sec · East Main Street
Car Route Details
A richer read on the saved driving route between Blades and Middletown.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
South Dupont Highway
Continue on South Dupont Highway
21.1 mi · 00h 25m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Sunny leaving Blades and Sunny near Middletown.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Blades to Middletown?
The road trip is about 63.3 miles (101.8 km) and usually takes 01h 15m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Woodside is a useful midpoint, sitting about 31.6 miles from Blades and 31.6 miles from Middletown.
How much longer is the road route than the straight-line distance?
The direct path is about 56.5 miles (91 km), while the road route adds roughly 6.8 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:00 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $9.11 one way or $18.22 round trip. Estimated CO2 is about 19.8 kg one way.
What should you check before leaving?
Before you leave, expect Sunny around Blades and Sunny near Middletown.
Stop Ideas Near Woodside
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Woodside.
Dover, Delaware
Easton Airport, Maryland
Kent Island, MD
Newark
Flight Path Map
This map shows the direct air route between Blades and Middletown. Straight-line distance: 56.53 mi (90.97 km).
#1 Blades
Town of the United States
| Population | 1,498 |
| Coordinates | 38.6356700, -75.6099300 |
| Altitude | 4 |
| Country | United States |
#2 Middletown
Town in Delaware, USA
| Population | 23,765 |
| Coordinates | 39.4495600, -75.7163200 |
| Altitude | 21 |
| Country | United States |
End: East Main Street (-75.716335, 39.449706)
Estimated Travel Time
Distance: 102 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 06m |
| 40 mph (64.37 km/h) | 01h 34m |
| 50 mph (80.47 km/h) | 01h 15m |
| 60 mph (96.56 km/h) | 01h 03m |
| 70 mph (112.65 km/h) | 00h 54m |
| 80 mph (129 km/h) | 00h 47m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $9.11 | $18.22 |
| Mid-grade | $4.60 | $10.26 | $20.51 |
| Premium | $4.95 | $11.05 | $22.09 |
| Diesel | $5.98 | $13.34 | $26.67 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Delaware · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.