How far is Baltimore, MD from Randallstown, MD?
The driving distance from Baltimore, MD to Randallstown, MD is about 17.1 miles (27.5 km), with a travel time of about 00h 28m by car.
- The straight-line flight distance is about 11.1 miles (17.9 km).
- For a round trip, plan for roughly 00h 57m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 28m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
A city in Baltimore County, Maryland.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Sunny
Driving Route Map
The map below follows the saved road route between Baltimore and Randallstown.
Turn-by-Turn Driving Directions
Step-by-step road directions between Baltimore and Randallstown.
-
1
Start on East Fayette Street
149 m · 23 sec · East Fayette Street
-
2
Turn left onto Saint Paul Street
95 m · 11 sec · Saint Paul Street
-
3
Continue on Light Street
1913 ft · 1 min · Light Street
-
4
Turn right onto East Conway Street
1625 ft · 52 sec · East Conway Street
-
5
Turn left onto Cal Ripken Way
1.1 km · 2 min · Cal Ripken Way
-
6
Keep slight left to continue on I 95 South: Washington
1.2 km · 1 min
-
7
Merge slight left
2.9 mi · 4 min
-
8
Take the exit slight right toward I 695 West: Towson
3248 ft · 1 min
-
9
Merge slight left onto Baltimore Beltway
7.7 mi · 11 min · Baltimore Beltway
-
10
Take the exit slight right toward MD 26: Liberty Road, Randallstown, Lochearn
120 m · 10 sec
-
11
Keep slight left to continue on MD 26 West: Randallstown, Liberty Road
1514 ft · 37 sec
-
12
Turn slight right onto MD 26 West: Randallstown
1050 ft · 45 sec
-
13
Turn straight onto Liberty Road
3 mi · 6 min · Liberty Road
-
14
Arrive at your destination
0 m · 1 sec · Liberty Road
Car Route Details
A richer read on the saved driving route between Baltimore and Randallstown.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Baltimore Beltway
Merge slight left onto Baltimore Beltway
7.73 mi · 00h 11m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Sunny leaving Baltimore and Sunny near Randallstown.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Baltimore to Randallstown?
The road trip is about 17.1 miles (27.5 km) and usually takes 00h 28m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Catonsville is a useful midpoint, sitting about 8.5 miles from Baltimore and 8.5 miles from Randallstown.
How much longer is the road route than the straight-line distance?
The direct path is about 11.1 miles (17.9 km), while the road route adds roughly 6 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:32 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $2.45 one way or $4.90 round trip. Estimated CO2 is about 5.3 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Baltimore and Sunny near Randallstown.
Stop Ideas Near Catonsville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Catonsville.
BWI Rail Station
Pennsylvania Station
New Carrollton station
Rockville station
Flight Path Map
This map shows the direct air route between Baltimore and Randallstown. Straight-line distance: 11.13 mi (17.92 km).
#1 Baltimore
The thirty-first most populous city in the United States and the center of the Baltimore metropolitan area.
| Population | 586,131 |
| Coordinates | 39.2903800, -76.6121900 |
| Altitude | 10 |
| Country | United States |
#2 Randallstown
Census designated place
| Population | 32,430 |
| Coordinates | 39.3673300, -76.7952500 |
| Altitude | 176 |
| Country | United States |
End: Randallstown (-76.79525, 39.36733)
Estimated Travel Time
Distance: 27 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 34m |
| 40 mph (64.37 km/h) | 00h 25m |
| 50 mph (80.47 km/h) | 00h 20m |
| 60 mph (96.56 km/h) | 00h 17m |
| 70 mph (112.65 km/h) | 00h 14m |
| 80 mph (129 km/h) | 00h 12m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $2.45 | $4.90 |
| Mid-grade | $4.60 | $2.76 | $5.52 |
| Premium | $4.95 | $2.97 | $5.94 |
| Diesel | $5.98 | $3.59 | $7.18 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.