How far is Baltimore, MD from Pikesville, MD?
The driving distance from Baltimore, MD to Pikesville, MD is about 11.2 miles (18.1 km), with a travel time of about 00h 23m by car.
- The straight-line flight distance is about 8.3 miles (13.3 km).
- For a round trip, plan for roughly 00h 47m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 23m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
A census-designated place in Baltimore County, Maryland.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Driving Route Map
The map below follows the saved road route between Baltimore and Pikesville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Baltimore and Pikesville.
-
1
Start on East Fayette Street
15 m · 3 sec · East Fayette Street
-
2
Turn slight right onto North Calvert Street
2212 ft · 1 min · North Calvert Street
-
3
Turn right onto East Centre Street
814 ft · 32 sec · East Centre Street
-
4
Turn left onto Fallsway
629 ft · 22 sec · Fallsway
-
5
Take the ramp straight toward I 83 North
1823 ft · 44 sec
-
6
Merge slight left onto Jones Falls Expressway
4.9 mi · 7 min · Jones Falls Expressway
-
7
Take the exit slight right toward Northern Parkway West
1248 ft · 43 sec
-
8
Turn straight onto West Northern Parkway
2.1 mi · 5 min · West Northern Parkway
-
9
Turn right onto Park Heights Avenue
2 mi · 5 min · Park Heights Avenue
-
10
Turn left onto Slade Avenue
2139 ft · 1 min · Slade Avenue
-
11
Turn right onto Reisterstown Road
2489 ft · 1 min · Reisterstown Road
-
12
Turn right onto East Sudbrook Lane
54 m · 6 sec · East Sudbrook Lane
-
13
Turn right
125 m · 30 sec
-
14
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Baltimore and Pikesville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Jones Falls Expressway
Merge slight left onto Jones Falls Expressway
4.87 mi · 00h 07m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Cloudy leaving Baltimore and Cloudy near Pikesville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Baltimore to Pikesville?
The road trip is about 11.2 miles (18.1 km) and usually takes 00h 23m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Gwynn Oak is a useful midpoint, sitting about 5.6 miles from Baltimore and 5.6 miles from Pikesville.
How much longer is the road route than the straight-line distance?
The direct path is about 8.3 miles (13.3 km), while the road route adds roughly 2.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:42 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.63 one way or $3.27 round trip. Estimated CO2 is about 3.6 kg one way.
What should you check before leaving?
Before you leave, expect Cloudy around Baltimore and Cloudy near Pikesville.
Stop Ideas Near Gwynn Oak
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Gwynn Oak.
Pennsylvania Station
BWI Rail Station
New Carrollton station
Rockville station
Flight Path Map
This map shows the direct air route between Baltimore and Pikesville. Straight-line distance: 8.26 mi (13.3 km).
#1 Baltimore
The thirty-first most populous city in the United States and the center of the Baltimore metropolitan area.
| Population | 586,131 |
| Coordinates | 39.2903800, -76.6121900 |
| Altitude | 10 |
| Country | United States |
#2 Pikesville
Location in Maryland
| Population | 30,764 |
| Coordinates | 39.3742700, -76.7224700 |
| Altitude | 155 |
| Country | United States |
End: Pikesville (-76.72247, 39.37427)
Estimated Travel Time
Distance: 18 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 22m |
| 40 mph (64.37 km/h) | 00h 16m |
| 50 mph (80.47 km/h) | 00h 13m |
| 60 mph (96.56 km/h) | 00h 11m |
| 70 mph (112.65 km/h) | 00h 09m |
| 80 mph (129 km/h) | 00h 08m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $1.63 | $3.27 |
| Mid-grade | $4.60 | $1.84 | $3.68 |
| Premium | $4.95 | $1.98 | $3.96 |
| Diesel | $5.98 | $2.39 | $4.78 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 22, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.