How far is Williamsville, NY from Ramapo, NY?
The driving distance from Williamsville, NY to Ramapo, NY is about 350.3 miles (563.8 km), with a travel time of about 05h 53m by car.
- The straight-line flight distance is about 266.1 miles (428.2 km).
- For a round trip, plan for roughly 11h 46m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 05h 53m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Broome County, New York, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Sunny
Driving Route Map
The map below follows the saved road route between Williamsville and Ramapo.
Turn-by-Turn Driving Directions
Step-by-step road directions between Williamsville and Ramapo.
-
1
Start on Main Street
2.1 mi · 4 min · Main Street
-
2
Turn right onto Transit Road
1.2 mi · 2 min · Transit Road
-
3
Take the exit slight right toward I 90
1202 ft · 29 sec
-
4
Continue straight
978 ft · 24 sec
-
5
Keep slight right to continue on I 90 East: Albany
1593 ft · 39 sec
-
6
Merge slight left onto New York State Thruway
96.3 mi · 1 hr 51 min · New York State Thruway
-
7
Take the exit slight right toward NY 414: Waterloo, Clyde
2420 ft · 59 sec
-
8
Keep slight right
100 m · 8 sec
-
9
Continue on State Route 414
1557 ft · 35 sec · State Route 414
-
10
Turn left
4.1 mi · 7 min
-
11
At the end of the road, turn left onto Auburn Road
1.9 mi · 2 min · Auburn Road
-
12
Continue on Clark Street Road
9.6 mi · 11 min · Clark Street Road
-
13
Turn right onto State Street
69 m · 12 sec · State Street
-
14
Turn left onto Dill Street
720 ft · 22 sec · Dill Street
-
15
Continue on Loop Road
140 m · 17 sec · Loop Road
-
16
Turn left onto Genesee Street
5.5 mi · 10 min · Genesee Street
-
17
Continue on West Genesee Street Road
2.2 mi · 5 min · West Genesee Street Road
-
18
Turn right onto East Lake Street
2676 ft · 45 sec · East Lake Street
-
19
Continue on East Lake Road
9.4 mi · 14 min · East Lake Road
-
20
Continue on State Route 41
4.8 mi · 7 min · State Route 41
-
21
Continue on East Lake Road
2904 ft · 49 sec · East Lake Road
-
22
Continue on State Highway 41
9.8 mi · 14 min · State Highway 41
-
23
Turn right onto North West Street
1.2 mi · 3 min · North West Street
-
24
Take the ramp left
1.1 km · 1 min
-
25
Keep slight right to continue on I 81 South: Binghamton
1396 ft · 34 sec
-
26
Merge slight left
45.4 mi · 54 min
-
27
Keep slight left to continue on New York
130.4 mi · 2 hr 41 min
-
28
Keep slight left to continue on I 87, NYST: Albany, New York City
1.1 km · 60 sec
-
29
Keep slight right to continue on I 87 Toll South: New York City
1.5 km · 2 min
-
30
Merge slight left onto New York State Thruway
13.1 mi · 15 min · New York State Thruway
-
31
Take the exit slight right toward NY 17 North, NY 59: Sloatsburg, Suffern
1114 ft · 36 sec
-
32
Turn right onto Old Route 17
1607 ft · 36 sec · Old Route 17
-
33
Turn right onto Orange Turnpike
2876 ft · 55 sec · Orange Turnpike
-
34
Turn left onto Torne Valley Road
1.1 mi · 3 min · Torne Valley Road
-
35
Turn left onto Torne Brook Road
2084 ft · 2 min · Torne Brook Road
-
36
Turn right onto Lake Street
47 m · 7 sec · Lake Street
-
37
Arrive at your destination
0 m · 1 sec · Lake Street
Car Route Details
A richer read on the saved driving route between Williamsville and Ramapo.
Long-distance drive
This route is long enough that fuel, rest stops, weather, and timing matter more than any single maneuver.
New York
Keep slight left to continue on New York
130 mi · 02h 41m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Mostly Cloudy leaving Williamsville and Sunny near Ramapo.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Williamsville to Ramapo?
The road trip is about 350.3 miles (563.8 km) and usually takes 05h 53m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Lisle is a useful midpoint, sitting about 171.8 miles from Williamsville and 178.5 miles from Ramapo.
How much longer is the road route than the straight-line distance?
The direct path is about 266.1 miles (428.2 km), while the road route adds roughly 84.2 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 5:14 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $54.98 one way or $109.95 round trip. Estimated CO2 is about 109.8 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Williamsville and Sunny near Ramapo.
Stop Ideas Near Lisle
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Lisle.
Empire Expo Center
William F. Walsh Regional Transportation Center
Union Station
Rome station
Flight Path Map
This map shows the direct air route between Williamsville and Ramapo. Straight-line distance: 266.06 mi (428.18 km).
#1 Williamsville
Town in Erie County, New York
| Population | 5,171 |
| Coordinates | 42.9639500, -78.7378100 |
| Altitude | 206 |
| Country | United States |
#2 Ramapo
Town in Rockland County, New York, United States
| Population | 138,356 |
| Coordinates | 41.1412100, -74.1684800 |
| Altitude | 101 |
| Country | United States |
End: Lake Street (-74.168592, 41.140993)
Estimated Travel Time
Distance: 564 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 11h 40m |
| 40 mph (64.37 km/h) | 08h 45m |
| 50 mph (80.47 km/h) | 07h 00m |
| 60 mph (96.56 km/h) | 05h 50m |
| 70 mph (112.65 km/h) | 05h 00m |
| 80 mph (129 km/h) | 04h 22m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.45 | $54.98 | $109.95 |
| Mid-grade | $4.98 | $61.58 | $123.16 |
| Premium | $5.38 | $66.52 | $133.04 |
| Diesel | $6.51 | $80.45 | $160.90 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in New York · Oct 15, 2026