How far is Tool, TX from Comanche, TX?
The driving distance from Tool, TX to Comanche, TX is about 174.6 miles (281 km), with a travel time of about 03h 42m by car.
- The straight-line flight distance is about 144.7 miles (232.9 km).
- For a round trip, plan for roughly 07h 24m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM CST.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 42m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Showers And Thunderstorms Likely
Rain Showers Likely
Driving Route Map
The map below follows the saved road route between Tool and Comanche.
Turn-by-Turn Driving Directions
Step-by-step road directions between Tool and Comanche.
-
1
Start on South Tool Drive
3.3 mi · 5 min · South Tool Drive
-
2
Continue on South Seven Points Boulevard
1.1 mi · 2 min · South Seven Points Boulevard
-
3
Turn left onto West Cedar Creek Parkway
10.7 mi · 19 min · West Cedar Creek Parkway
-
4
Turn right
13.9 mi · 24 min
-
5
Continue on South Kaufman Street
127 m · 10 sec · South Kaufman Street
-
6
At the end of the road, turn right onto South Kaufman Street
1.4 mi · 2 min · South Kaufman Street
-
7
Turn left onto Creechville Road
945 ft · 18 sec · Creechville Road
-
8
Continue on Lake Bardwell Drive
1.5 km · 1 min · Lake Bardwell Drive
-
9
Continue on West Lake Bardwell Drive
1.2 km · 1 min · West Lake Bardwell Drive
-
10
Turn right onto US Highway 287
790 ft · 19 sec · US Highway 287
-
11
Take the ramp straight toward US 287 North
1660 ft · 41 sec
-
12
Merge slight left onto Congressman Joe Barton Parkway
1.7 mi · 2 min · Congressman Joe Barton Parkway
-
13
Continue on West US Highway 287
25.7 mi · 30 min · West US Highway 287
-
14
Take the exit slight right toward US 67 South: Cleburne
1295 ft · 1 min
-
15
Turn straight onto South US Highway 67
1 km · 1 min · South US Highway 67
-
16
Take the ramp straight toward US 67 South
719 ft · 18 sec
-
17
Merge slight left
78.4 mi · 1 hr 31 min
-
18
Turn left onto East South Loop
2.4 mi · 4 min · East South Loop
-
19
Continue on West Washington Street
1.4 mi · 3 min · West Washington Street
-
20
Continue on South US Highway 377
7.5 mi · 9 min · South US Highway 377
-
21
Continue on Dublin Bypass
4.8 mi · 5 min · Dublin Bypass
-
22
Continue on Southwest US Highway 377
2.3 mi · 3 min · Southwest US Highway 377
-
23
Continue on US Highway 67
15.4 mi · 18 min · US Highway 67
-
24
Continue on East Central Avenue
1.1 mi · 1 min · East Central Avenue
-
25
Arrive at your destination
0 m · 1 sec · East Central Avenue
Car Route Details
A richer read on the saved driving route between Tool and Comanche.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
US 67 South
Merge slight left
78.4 mi · 01h 31m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Showers And Thunderstorms Likely leaving Tool and Rain Showers Likely near Comanche.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Tool to Comanche?
The road trip is about 174.6 miles (281 km) and usually takes 03h 42m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Cleburne is a useful midpoint, sitting about 87.2 miles from Tool and 87.4 miles from Comanche.
How much longer is the road route than the straight-line distance?
The direct path is about 144.7 miles (232.9 km), while the road route adds roughly 29.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM CST. If you want a more comfortable same-day return, try to leave by 9:36 AM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $22.68 one way or $45.36 round trip. Estimated CO2 is about 54.7 kg one way.
What should you check before leaving?
Before you leave, expect Showers And Thunderstorms Likely around Tool and Rain Showers Likely near Comanche.
Stop Ideas Near Cleburne
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Cleburne.
Cleburne
Fort Worth Central Station
Union Station
Dallas, TX
Flight Path Map
This map shows the direct air route between Tool and Comanche. Straight-line distance: 144.74 mi (232.93 km).
#1 Tool
City in Henderson County, Texas, United States
| Population | 2,335 |
| Coordinates | 32.2679200, -96.1702500 |
| Altitude | 104 |
| Country | United States |
#2 Comanche
City in Texas, United States
| Population | 4,219 |
| Coordinates | 31.8973700, -98.6036600 |
| Altitude | 421 |
| Country | United States |
End: Comanche (-98.60366, 31.89737)
Estimated Travel Time
Distance: 281 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 05h 49m |
| 40 mph (64.37 km/h) | 04h 21m |
| 50 mph (80.47 km/h) | 03h 29m |
| 60 mph (96.56 km/h) | 02h 54m |
| 70 mph (112.65 km/h) | 02h 29m |
| 80 mph (129 km/h) | 02h 10m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.68 | $22.68 | $45.36 |
| Mid-grade | $4.20 | $25.87 | $51.74 |
| Premium | $4.57 | $28.18 | $56.35 |
| Diesel | $5.78 | $35.59 | $71.17 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Texas · Oct 31, 2026