How far is Comanche, TX from Tool, TX?
The driving distance from Comanche, TX to Tool, TX is about 187.6 miles (301.9 km), with a travel time of about 03h 41m by car.
- The straight-line flight distance is about 144.7 miles (232.9 km).
- For a round trip, plan for roughly 07h 22m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM CST.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 41m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Tarrant County, Texas, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers Likely
Showers And Thunderstorms Likely
Driving Route Map
The map below follows the saved road route between Comanche and Tool.
Turn-by-Turn Driving Directions
Step-by-step road directions between Comanche and Tool.
-
1
Start on East Central Avenue
1.1 mi · 1 min · East Central Avenue
-
2
Continue on US Highway 67
15.4 mi · 18 min · US Highway 67
-
3
Continue on Southwest US Highway 377
2.3 mi · 3 min · Southwest US Highway 377
-
4
Continue on Dublin Bypass
4.8 mi · 5 min · Dublin Bypass
-
5
Continue on South US Highway 377
7.5 mi · 9 min · South US Highway 377
-
6
Turn straight onto West Washington Street
1.3 mi · 2 min · West Washington Street
-
7
Keep slight right to continue on West South Loop
3.6 mi · 6 min · West South Loop
-
8
Continue on North US Highway 377
42.4 mi · 51 min · North US Highway 377
-
9
Continue on South US Highway 377
11.1 mi · 13 min · South US Highway 377
-
10
Continue on Benbrook Boulevard
2.5 mi · 4 min · Benbrook Boulevard
-
11
Turn right onto Southwest Loop 820
1160 ft · 23 sec · Southwest Loop 820
-
12
Take the ramp slight left toward I 20 East
1833 ft · 35 sec
-
13
Merge slight left onto Ronald Reagan Memorial Highway
14.1 mi · 15 min · Ronald Reagan Memorial Highway
-
14
Keep slight left to continue on Ronald Reagan Memorial Highway
13.9 mi · 15 min · Ronald Reagan Memorial Highway
-
15
Continue on Lyndon B Johnson Freeway
21.4 mi · 23 min · Lyndon B Johnson Freeway
-
16
Take the exit slight right toward US 175 East: Kaufman
1642 ft · 40 sec
-
17
Merge slight left onto C F Hawn Freeway
30.5 mi · 33 min · C F Hawn Freeway
-
18
Turn right
1.7 mi · 3 min
-
19
Turn straight
103 m · 12 sec
-
20
Turn slight right onto South State Highway 274
9.7 mi · 14 min · South State Highway 274
-
21
Continue on North Tool Drive
3.3 mi · 5 min · North Tool Drive
-
22
Arrive at your destination
0 m · 1 sec · South Tool Drive
Car Route Details
A richer read on the saved driving route between Comanche and Tool.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
North US Highway 377
Continue on North US Highway 377
42.4 mi · 00h 51m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Rain Showers Likely leaving Comanche and Showers And Thunderstorms Likely near Tool.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Comanche to Tool?
The road trip is about 187.6 miles (301.9 km) and usually takes 03h 41m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Benbrook is a useful midpoint, sitting about 93.7 miles from Comanche and 93.9 miles from Tool.
How much longer is the road route than the straight-line distance?
The direct path is about 144.7 miles (232.9 km), while the road route adds roughly 42.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM CST. If you want a more comfortable same-day return, try to leave by 9:38 AM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $24.37 one way or $48.75 round trip. Estimated CO2 is about 58.8 kg one way.
What should you check before leaving?
Before you leave, expect Rain Showers Likely around Comanche and Showers And Thunderstorms Likely near Tool.
Stop Ideas Near Benbrook
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Benbrook.
Fort Worth Central Station
Cleburne
Union Station
Dallas, TX
Flight Path Map
This map shows the direct air route between Comanche and Tool. Straight-line distance: 144.74 mi (232.93 km).
#1 Comanche
City in Texas, United States
| Population | 4,219 |
| Coordinates | 31.8973700, -98.6036600 |
| Altitude | 421 |
| Country | United States |
#2 Tool
City in Henderson County, Texas, United States
| Population | 2,335 |
| Coordinates | 32.2679200, -96.1702500 |
| Altitude | 104 |
| Country | United States |
End: Tool (-96.17025, 32.26792)
Estimated Travel Time
Distance: 302 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 06h 15m |
| 40 mph (64.37 km/h) | 04h 41m |
| 50 mph (80.47 km/h) | 03h 45m |
| 60 mph (96.56 km/h) | 03h 07m |
| 70 mph (112.65 km/h) | 02h 40m |
| 80 mph (129 km/h) | 02h 20m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.68 | $24.37 | $48.75 |
| Mid-grade | $4.20 | $27.80 | $55.61 |
| Premium | $4.57 | $30.28 | $60.56 |
| Diesel | $5.78 | $38.24 | $76.49 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Texas · Oct 31, 2026