How far is Taylorsville, UT from Clinton, UT?
The driving distance from Taylorsville, UT to Clinton, UT is about 38.8 miles (62.5 km), with a travel time of about 00h 44m by car.
- The straight-line flight distance is about 33.1 miles (53.3 km).
- For a round trip, plan for roughly 01h 29m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM MDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 44m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Davis County, Utah, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Driving Route Map
The map below follows the saved road route between Taylorsville and Clinton.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylorsville and Clinton.
-
1
Start on 4700 South
3224 ft · 1 min · 4700 South
-
2
Take the ramp slight right toward I 215 North
2739 ft · 1 min
-
3
Merge slight left onto Belt Route
10.6 mi · 11 min · Belt Route
-
4
Keep slight right to continue on Belt Route
2.4 mi · 3 min · Belt Route
-
5
Merge slight left onto Veterans Memorial Highway
10.2 mi · 11 min · Veterans Memorial Highway
-
6
Keep slight left to continue on Veterans Memorial Highway
11.6 mi · 12 min · Veterans Memorial Highway
-
7
Take the exit slight right toward SR 103: 650 North
1623 ft · 47 sec
-
8
Turn left
906 ft · 24 sec
-
9
Turn right onto Main Street
1.2 mi · 2 min · Main Street
-
10
Turn left onto 1800 North
1.3 mi · 2 min · 1800 North
-
11
Arrive at your destination
0 m · 1 sec · West 1800 North
Car Route Details
A richer read on the saved driving route between Taylorsville and Clinton.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Veterans Memorial Highway
Keep slight left to continue on Veterans Memorial Highway
11.6 mi · 00h 12m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Sunny leaving Taylorsville and Sunny near Clinton.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylorsville to Clinton?
The road trip is about 38.8 miles (62.5 km) and usually takes 00h 44m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Centerville is a useful midpoint, sitting about 19.4 miles from Taylorsville and 19.4 miles from Clinton.
How much longer is the road route than the straight-line distance?
The direct path is about 33.1 miles (53.3 km), while the road route adds roughly 5.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM MDT. If you want a more comfortable same-day return, try to leave by 7:00 PM MDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $5.33 one way or $10.67 round trip. Estimated CO2 is about 12.2 kg one way.
What should you check before leaving?
Before you leave, expect Sunny around Taylorsville and Sunny near Clinton.
Stop Ideas Near Centerville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Centerville.
Salt Lake City Intermodal Hub
Salt Lake City Intermodal Hub
Ogden, Utah
Provo
Flight Path Map
This map shows the direct air route between Taylorsville and Clinton. Straight-line distance: 33.13 mi (53.31 km).
#1 Taylorsville
A city in Salt Lake County, Utah.
| Population | 59,402 |
| Coordinates | 40.6677200, -111.9388300 |
| Altitude | 1310 |
| Country | United States |
#2 Clinton
City in Davis County, Utah, United States
| Population | 22,728 |
| Coordinates | 41.1396700, -112.0505000 |
| Altitude | 1339 |
| Country | United States |
End: Clinton (-112.0505, 41.13967)
Estimated Travel Time
Distance: 62 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 17m |
| 40 mph (64.37 km/h) | 00h 58m |
| 50 mph (80.47 km/h) | 00h 46m |
| 60 mph (96.56 km/h) | 00h 38m |
| 70 mph (112.65 km/h) | 00h 33m |
| 80 mph (129 km/h) | 00h 29m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.89 | $5.33 | $10.67 |
| Mid-grade | $4.23 | $5.80 | $11.59 |
| Premium | $4.55 | $6.23 | $12.46 |
| Diesel | $5.41 | $7.41 | $14.83 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Utah · May 12, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.