How far is Taylorsville, UT from Sandy Hills, UT?

The driving distance from Taylorsville, UT to Sandy Hills, UT is about 10.8 miles (17.4 km), with a travel time of about 00h 15m by car.

  • The straight-line flight distance is about 7.6 miles (12.2 km).
  • For a round trip, plan for roughly 00h 30m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 7:00 AM to 7:00 PM MDT.
Trip Tools

Reverse, save, or send this route

This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
10.8 mi
00h 15m
Flight
7.56 mi
12.17 km direct

This is an easy same-day return drive.

Learn Distance

Choose another destination from Taylorsville.

Flight Distance

Direct air line
7.56 mi
Kilometers
12.17 km
Flight Time

Driving Distance

Road route
10.8 mi
Kilometers
17.38 km
Drive Time
00h 15m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 00h 15m.

Arrival Snapshot
Arrive in Sandy Hills
Sat, Apr 18, 1:25 AM MDT
Return by in Taylorsville
Sat, Apr 18, 1:41 AM MDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Taylorsville
2026-04-18T01:10
Arrive Sandy Hills
Sat, Apr 18, 1:25 AM MDT
Route Timing
00h 15m
One way by road
Best Departure Window
7:00 AM to 7:00 PM MDT
Leave when it suits your day
Arrive between
7:15 AM to 7:15 PM MDT

This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.

Leave by
8:00 PM MDT
Keeps a same-day return open with about 01h 30m at the destination.
Back in Taylorsville
10:00 PM MDT
Flexible departure

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Midvale
UT

City in Salt Lake County, Utah, United States

From Taylorsville
5.4 mi
00h 07m
To Sandy Hills
5.4 mi
00h 07m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
57°F
Saturday

Patchy Frost then Sunny

Starts
Sat, Apr 18 6:00 AM MDT
Wind
7 mph S
Destination
56°F
Saturday

Patchy Frost then Sunny

Starts
Sat, Apr 18 6:00 AM MDT
Wind
6 mph S

Driving Route Map

The map below follows the saved road route between Taylorsville and Sandy Hills.

Turn-by-Turn Driving Directions

Step-by-step road directions between Taylorsville and Sandy Hills.

  1. 1

    Start on 4700 South

    1.2 km · 2 min · 4700 South

  2. 2

    Turn left onto I 215 South

    2664 ft · 33 sec

  3. 3

    Merge slight left onto Belt Route

    5.4 mi · 6 min · Belt Route

  4. 4

    Take the exit slight right toward Union Park Avenue

    1077 ft · 26 sec

  5. 5

    Keep slight right to continue on Union Park Avenue South

    1768 ft · 43 sec

  6. 6

    Turn straight onto Union Park Avenue

    1.6 mi · 3 min · Union Park Avenue

  7. 7

    Continue on 1300 East

    1.7 mi · 3 min · 1300 East

  8. 8

    Turn left onto Silvercrest Drive

    553 ft · 21 sec · Silvercrest Drive

  9. 9

    Turn right onto Sandy Hills Drive

    148 m · 17 sec · Sandy Hills Drive

  10. 10

    Arrive at your destination

    0 m · 1 sec · Sandy Hills Drive

Car Route Details

A richer read on the saved driving route between Taylorsville and Sandy Hills.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
10 steps
4 turns on the saved route
Ramps & Exits
2
1 merges, 1 ramps or exits
Navigation Density
92.6 / 100 mi
Decision points by distance
Main Roads
Belt Route
5.44 mi · 50%
Union Park Avenue
1.84 mi · 17%
1300 East
1.72 mi · 16%
4700 South
0.76 mi · 7%
I 215 South
0.5 mi · 5%
Union Park Avenue South
0.33 mi · 3%
Longest Stretch

Belt Route

Merge slight left onto Belt Route

5.44 mi · 00h 06m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A short regional drive

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

Drive Time
00h 15m
Quick drive
Same-Day Return
00h 30m
Round-trip wheel time
Road vs Air
+3.2 mi
7.6 mi direct line
Halfway Stop
Midvale
00h 07m from Taylorsville
Leave By
8:00 PM MDT
Flexible departure
Weather Watch

Patchy Frost then Sunny leaving Taylorsville and Patchy Frost then Sunny near Sandy Hills.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Taylorsville to Sandy Hills?

The road trip is about 10.8 miles (17.4 km) and usually takes 00h 15m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

What is the halfway point on this route?

Midvale is a useful midpoint, sitting about 5.4 miles from Taylorsville and 5.4 miles from Sandy Hills.

How much longer is the road route than the straight-line distance?

The direct path is about 7.6 miles (12.2 km), while the road route adds roughly 3.2 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 7:00 AM to 7:00 PM MDT. If you want a more comfortable same-day return, try to leave by 8:00 PM MDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $1.48 one way or $2.96 round trip. Estimated CO2 is about 3.4 kg one way.

What should you check before leaving?

Before you leave, expect Patchy Frost then Sunny around Taylorsville and Patchy Frost then Sunny near Sandy Hills.

Stop Ideas Near Midvale

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Midvale, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Midvale.

RAIL

Salt Lake City Intermodal Hub

17 mi away
340 South 600 West
BUS

Salt Lake City Intermodal Hub

17 mi away
300 South 600 West
RAIL

Provo

47 mi away
300 West 600 South
BUS

Ogden, Utah

68 mi away
2393 Wall Avenue

Flight Path Map

This map shows the direct air route between Taylorsville and Sandy Hills. Straight-line distance: 7.56 mi (12.17 km).

Taylorsville

#1 Taylorsville

A city in Salt Lake County, Utah.

Population59,402
Coordinates40.6677200, -111.9388300
Altitude1310
CountryUnited States
Photo coming soon

#2 Sandy Hills

A census-designated place in Salt Lake County, Utah.

Population89,575
Coordinates40.5810600, -111.8507700
Altitude1452
CountryUnited States
Start: UT 266 (-111.93883, 40.667704)
End: Sandy Hills Drive (-111.850649, 40.581382)

Estimated Travel Time

Distance: 17 km by road

SpeedTime
30 mph (48.3 km/h)00h 21m
40 mph (64.37 km/h)00h 16m
50 mph (80.47 km/h)00h 12m
60 mph (96.56 km/h)00h 10m
70 mph (112.65 km/h)00h 09m
80 mph (129 km/h)00h 08m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
0.38 gal
1.44 L · about $1.48
Round trip
$2.96
0.76 gal · 2.88 L
Estimated CO2
3.4 kg one way
Round trip: 6.8 kg / 15 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.89 $1.48 $2.96
Mid-grade $4.23 $1.61 $3.22
Premium $4.55 $1.73 $3.46
Diesel $5.41 $2.06 $4.11

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Utah · Apr 18, 2026

There is no time difference between Taylorsville and Sandy Hills. The current time is 01:10:39.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.