How far is Taylorsville, UT from Cedar City, UT?
The driving distance from Taylorsville, UT to Cedar City, UT is about 245.3 miles (394.8 km), with a travel time of about 04h 07m by car.
- The straight-line flight distance is about 215.2 miles (346.3 km).
- For a round trip, plan for roughly 08h 14m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM MDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 04h 07m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Millard County, Utah, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Patchy Frost then Sunny
Sunny
Driving Route Map
The map below follows the saved road route between Taylorsville and Cedar City.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylorsville and Cedar City.
-
1
Start on 4700 South
7 m · 6 sec · 4700 South
-
2
Continue on 4700 South
1107 ft · 24 sec · 4700 South
-
3
Continue on Taylorsville Expressway
1.5 mi · 2 min · Taylorsville Expressway
-
4
Continue on 4500 South
1547 ft · 31 sec · 4500 South
-
5
Take the ramp slight right toward I 15 South: Las Vegas
1587 ft · 41 sec
-
6
Merge slight left onto Veterans Memorial Highway
238.7 mi · 3 hr 56 min · Veterans Memorial Highway
-
7
Take the exit slight right toward SR 130: Enoch
1771 ft · 51 sec
-
8
Turn left onto North Main Street
3.9 mi · 6 min · North Main Street
-
9
Arrive at your destination
0 m · 1 sec · Main Street
Car Route Details
A richer read on the saved driving route between Taylorsville and Cedar City.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Veterans Memorial Highway
Merge slight left onto Veterans Memorial Highway
239 mi · 03h 56m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Patchy Frost then Sunny leaving Taylorsville and Sunny near Cedar City.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylorsville to Cedar City?
The road trip is about 245.3 miles (394.8 km) and usually takes 04h 07m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Holden is a useful midpoint, sitting about 122.7 miles from Taylorsville and 122.6 miles from Cedar City.
How much longer is the road route than the straight-line distance?
The direct path is about 215.2 miles (346.3 km), while the road route adds roughly 30.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM MDT. If you want a more comfortable same-day return, try to leave by 8:46 AM MDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $33.71 one way or $67.43 round trip. Estimated CO2 is about 77 kg one way.
What should you check before leaving?
Before you leave, expect Patchy Frost then Sunny around Taylorsville and Sunny near Cedar City.
Flight Path Map
This map shows the direct air route between Taylorsville and Cedar City. Straight-line distance: 215.18 mi (346.3 km).
#1 Taylorsville
A city in Salt Lake County, Utah.
| Population | 59,402 |
| Coordinates | 40.6677200, -111.9388300 |
| Altitude | 1310 |
| Country | United States |
#2 Cedar City
City in Iron County, Utah, United States
| Population | 34,764 |
| Coordinates | 37.6774800, -113.0618900 |
| Altitude | 1782 |
| Country | United States |
End: Cedar City (-113.06189, 37.67748)
Estimated Travel Time
Distance: 395 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 08h 10m |
| 40 mph (64.37 km/h) | 06h 07m |
| 50 mph (80.47 km/h) | 04h 54m |
| 60 mph (96.56 km/h) | 04h 05m |
| 70 mph (112.65 km/h) | 03h 30m |
| 80 mph (129 km/h) | 03h 03m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.89 | $33.71 | $67.43 |
| Mid-grade | $4.23 | $36.64 | $73.28 |
| Premium | $4.55 | $39.39 | $78.79 |
| Diesel | $5.41 | $46.87 | $93.74 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Utah · Apr 18, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.