How far is Taylor, MI from Salem, MI?
The driving distance from Taylor, MI to Salem, MI is about 30.6 miles (49.2 km), with a travel time of about 00h 42m by car.
- The straight-line flight distance is about 19.5 miles (31.4 km).
- For a round trip, plan for roughly 01h 24m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 42m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Charter township in Wayne County, Michigan
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Light Rain
Driving Route Map
The map below follows the saved road route between Taylor and Salem.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor and Salem.
-
1
Start on Wick Road
1.6 km · 2 min · Wick Road
-
2
Turn right onto South Beech Daly Road
1.6 km · 2 min · South Beech Daly Road
-
3
Turn left onto Ecorse Road
2533 ft · 49 sec · Ecorse Road
-
4
Take the ramp slight right toward I 94 West: Chicago
1240 ft · 30 sec
-
5
Merge slight right onto Detroit Industrial Expressway
5.4 mi · 6 min · Detroit Industrial Expressway
-
6
Take the exit slight right toward I 275: Toledo, Flint
1531 ft · 37 sec
-
7
Keep slight right to continue on I 275 North: Flint
1.3 km · 2 min
-
8
Merge slight left
11.1 mi · 12 min
-
9
Take the exit slight right toward I 96 East, M 14: Detroit, Ann Arbor
1075 ft · 26 sec
-
10
Keep slight left to continue on M 14: Ann Arbor
2362 ft · 58 sec
-
11
Keep slight right to continue on M 14: Ann Arbor
1366 ft · 39 sec
-
12
Merge slight left
3.7 mi · 4 min
-
13
Take the exit slight right toward Beck Road
2148 ft · 56 sec
-
14
Turn right onto Beck Road
1.1 km · 1 min · Beck Road
-
15
Turn left onto 5 Mile Road
2 mi · 3 min · 5 Mile Road
-
16
Turn right onto Napier Road
1 mi · 3 min · Napier Road
-
17
Turn left onto 6 Mile Road
1.4 mi · 2 min · 6 Mile Road
-
18
Continue on Six Mile Road
799 ft · 23 sec · Six Mile Road
-
19
Arrive at your destination
0 m · 1 sec · Six Mile Road
Car Route Details
A richer read on the saved driving route between Taylor and Salem.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
I 275 North
Merge slight left
11.1 mi · 00h 12m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Cloudy leaving Taylor and Chance Light Rain near Salem.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylor to Salem?
The road trip is about 30.6 miles (49.2 km) and usually takes 00h 42m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Canton is a useful midpoint, sitting about 15.2 miles from Taylor and 15.3 miles from Salem.
How much longer is the road route than the straight-line distance?
The direct path is about 19.5 miles (31.4 km), while the road route adds roughly 11.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:06 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $4.96 one way or $9.92 round trip. Estimated CO2 is about 9.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Taylor and Chance Light Rain near Salem.
Stop Ideas Near Canton
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Canton.
Greenfield Village, Michigan
Ann Arbor station
John D. Dingell Transit Center
Detroit
Flight Path Map
This map shows the direct air route between Taylor and Salem. Straight-line distance: 19.54 mi (31.44 km).
#1 Taylor
The most populous city in Wayne County, Michigan.
| Population | 60,576 |
| Coordinates | 42.2408700, -83.2696500 |
| Altitude | 187 |
| Country | United States |
#2 Salem
Township in Washtenaw County, Michigan
| Population | 6,464 |
| Coordinates | 42.4061500, -83.5799400 |
| Altitude | 285 |
| Country | United States |
End: Salem (-83.57994, 42.40615)
Estimated Travel Time
Distance: 49 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 01m |
| 40 mph (64.37 km/h) | 00h 45m |
| 50 mph (80.47 km/h) | 00h 36m |
| 60 mph (96.56 km/h) | 00h 30m |
| 70 mph (112.65 km/h) | 00h 26m |
| 80 mph (129 km/h) | 00h 22m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.59 | $4.96 | $9.92 |
| Mid-grade | $5.25 | $5.67 | $11.33 |
| Premium | $5.85 | $6.31 | $12.63 |
| Diesel | $6.48 | $7.00 | $14.00 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Michigan · Oct 15, 2026