How far is Taylor, MI from Canton, MI?
The driving distance from Taylor, MI to Canton, MI is about 18.1 miles (29.2 km), with a travel time of about 00h 26m by car.
- The straight-line flight distance is about 11.8 miles (19 km).
- For a round trip, plan for roughly 00h 53m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 26m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Wayne County, Michigan
Route Weather Snapshot
Check the forecast at both ends before you head out.
Showers And Thunderstorms
Showers And Thunderstorms
Driving Route Map
The map below follows the saved road route between Taylor and Canton.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor and Canton.
-
1
Start on Wick Road
1.6 km · 2 min · Wick Road
-
2
Turn right onto South Beech Daly Road
1.6 km · 2 min · South Beech Daly Road
-
3
Turn left onto Ecorse Road
2533 ft · 49 sec · Ecorse Road
-
4
Take the ramp slight right toward I 94 West: Chicago
1240 ft · 30 sec
-
5
Merge slight right onto Detroit Industrial Expressway
5.4 mi · 6 min · Detroit Industrial Expressway
-
6
Take the exit slight right toward I 275: Toledo, Flint
1531 ft · 37 sec
-
7
Keep slight right to continue on I 275 North: Flint
1.3 km · 2 min
-
8
Merge slight left
3.8 mi · 4 min
-
9
Take the exit slight right toward US 12: Michigan Avenue, Ypsilanti, Wayne
2549 ft · 1 min
-
10
Turn straight onto Michigan Avenue
1.9 mi · 3 min · Michigan Avenue
-
11
Turn slight right onto Geddes Road
87 m · 9 sec · Geddes Road
-
12
Turn right onto South Sheldon Road
2.2 mi · 4 min · South Sheldon Road
-
13
Turn left onto Cherry Hill Road
1844 ft · 38 sec · Cherry Hill Road
-
14
Turn right onto Surrey Drive
54 m · 9 sec · Surrey Drive
-
15
Turn right onto Eddington Circle
701 ft · 31 sec · Eddington Circle
-
16
Arrive at your destination
0 m · 1 sec · Eddington Circle
Car Route Details
A richer read on the saved driving route between Taylor and Canton.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Detroit Industrial Expressway
Merge slight right onto Detroit Industrial Expressway
5.43 mi · 00h 06m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Showers And Thunderstorms leaving Taylor and Showers And Thunderstorms near Canton.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylor to Canton?
The road trip is about 18.1 miles (29.2 km) and usually takes 00h 26m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Romulus is a useful midpoint, sitting about 9.1 miles from Taylor and 9.1 miles from Canton.
How much longer is the road route than the straight-line distance?
The direct path is about 11.8 miles (19 km), while the road route adds roughly 6.3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:36 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $2.41 one way or $4.83 round trip. Estimated CO2 is about 5.7 kg one way.
What should you check before leaving?
Before you leave, expect Showers And Thunderstorms around Taylor and Showers And Thunderstorms near Canton.
Stop Ideas Near Romulus
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Romulus.
Greenfield Village, Michigan
John D. Dingell Transit Center
Ann Arbor station
Detroit
Flight Path Map
This map shows the direct air route between Taylor and Canton. Straight-line distance: 11.83 mi (19.04 km).
#1 Taylor
The most populous city in Wayne County, Michigan.
| Population | 60,576 |
| Coordinates | 42.2408700, -83.2696500 |
| Altitude | 187 |
| Country | United States |
#2 Canton
Charter township in Wayne County, Michigan
| Population | 86,825 |
| Coordinates | 42.3086500, -83.4821600 |
| Altitude | 207 |
| Country | United States |
End: Canton (-83.48216, 42.30865)
Estimated Travel Time
Distance: 29 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 36m |
| 40 mph (64.37 km/h) | 00h 27m |
| 50 mph (80.47 km/h) | 00h 21m |
| 60 mph (96.56 km/h) | 00h 18m |
| 70 mph (112.65 km/h) | 00h 15m |
| 80 mph (129 km/h) | 00h 13m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $2.41 | $4.83 |
| Mid-grade | $4.25 | $2.72 | $5.44 |
| Premium | $4.65 | $2.98 | $5.96 |
| Diesel | $5.30 | $3.39 | $6.79 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Michigan · Apr 15, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.