How far is Taylor, MI from Riverview, MI?
The driving distance from Taylor, MI to Riverview, MI is about 9.5 miles (15.3 km), with a travel time of about 00h 17m by car.
- The straight-line flight distance is about 6.5 miles (10.5 km).
- For a round trip, plan for roughly 00h 35m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EST.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 17m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Wayne County, Michigan, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Taylor and Riverview.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor and Riverview.
-
1
Start on Wick Road
69 m · 13 sec · Wick Road
-
2
Turn left
31 m · 8 sec
-
3
Turn right
1 m · 1 sec
-
4
Turn slight left
74 m · 20 sec
-
5
At the end of the road, turn right onto Telegraph Road
3.1 mi · 5 min · Telegraph Road
-
6
Continue on Telegraph Road
1.3 km · 1 min · Telegraph Road
-
7
Turn left onto Pennsylvania Road
4 mi · 7 min · Pennsylvania Road
-
8
Turn right onto Fort Street
1.3 km · 1 min · Fort Street
-
9
Turn slight left
146 m · 18 sec
-
10
Turn slight left onto Fort Street
155 m · 12 sec · Fort Street
-
11
Turn right onto Hale Street
2575 ft · 1 min · Hale Street
-
12
Arrive at your destination
0 m · 1 sec · Hale Street
Car Route Details
A richer read on the saved driving route between Taylor and Riverview.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Pennsylvania Road
Turn left onto Pennsylvania Road
3.98 mi · 00h 07m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Sunny leaving Taylor and Mostly Sunny near Riverview.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylor to Riverview?
The road trip is about 9.5 miles (15.3 km) and usually takes 00h 17m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Woodhaven is a useful midpoint, sitting about 4.7 miles from Taylor and 4.7 miles from Riverview.
How much longer is the road route than the straight-line distance?
The direct path is about 6.5 miles (10.5 km), while the road route adds roughly 3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EST. If you want a more comfortable same-day return, try to leave by 7:54 PM EST.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.45 one way or $2.91 round trip. Estimated CO2 is about 3 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Taylor and Mostly Sunny near Riverview.
Stop Ideas Near Woodhaven
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Woodhaven.
Greenfield Village, Michigan
John D. Dingell Transit Center
Detroit
Royal Oak station
Flight Path Map
This map shows the direct air route between Taylor and Riverview. Straight-line distance: 6.52 mi (10.5 km).
#1 Taylor
The most populous city in Wayne County, Michigan.
| Population | 60,576 |
| Coordinates | 42.2408700, -83.2696500 |
| Altitude | 187 |
| Country | United States |
#2 Riverview
Riverview is a place in Michigan, United States.
| Population | 0 |
| Coordinates | 42.1742100, -83.1793700 |
| Altitude | 183 |
| Country | United States |
End: Riverview (-83.17937, 42.17421)
Estimated Travel Time
Distance: 15 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 18m |
| 40 mph (64.37 km/h) | 00h 14m |
| 50 mph (80.47 km/h) | 00h 11m |
| 60 mph (96.56 km/h) | 00h 09m |
| 70 mph (112.65 km/h) | 00h 08m |
| 80 mph (129 km/h) | 00h 07m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.27 | $1.45 | $2.91 |
| Mid-grade | $4.96 | $1.69 | $3.38 |
| Premium | $5.56 | $1.89 | $3.78 |
| Diesel | $6.58 | $2.24 | $4.47 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Michigan · Nov 07, 2026