How far is Taylor, MI from Marysville, MI?
The driving distance from Taylor, MI to Marysville, MI is about 67.4 miles (108.5 km), with a travel time of about 01h 21m by car.
- The straight-line flight distance is about 61.1 miles (98.4 km).
- For a round trip, plan for roughly 02h 42m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 21m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Michigan
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy then Chance Light Rain
Driving Route Map
The map below follows the saved road route between Taylor and Marysville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor and Marysville.
-
1
Start on Wick Road
158 m · 17 sec · Wick Road
-
2
Turn right onto West Point Street
657 ft · 31 sec · West Point Street
-
3
Turn right onto Baske Street
144 m · 23 sec · Baske Street
-
4
Turn right onto Telegraph Road
1.6 mi · 3 min · Telegraph Road
-
5
Take the exit slight right toward I 94 East: Detroit
2893 ft · 1 min
-
6
Merge slight left onto Detroit Industrial Expressway
7.6 mi · 9 min · Detroit Industrial Expressway
-
7
Continue on Edsel Ford Freeway
21.1 mi · 28 min · Edsel Ford Freeway
-
8
Continue on Ford Freeway
34.9 mi · 37 min · Ford Freeway
-
9
Take the exit slight right toward I 94 BL: Marysville
1854 ft · 47 sec
-
10
Turn right onto Gratiot Avenue
1224 ft · 23 sec · Gratiot Avenue
-
11
Continue on Gratiot Boulevard
2880 ft · 53 sec · Gratiot Boulevard
-
12
Turn right onto Huron Boulevard
1065 ft · 30 sec · Huron Boulevard
-
13
Turn right onto New Jersey Avenue
27 m · 4 sec · New Jersey Avenue
-
14
Arrive at your destination
0 m · 1 sec · New Jersey Avenue
Car Route Details
A richer read on the saved driving route between Taylor and Marysville.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Ford Freeway
Continue on Ford Freeway
34.9 mi · 00h 37m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Cloudy leaving Taylor and Mostly Cloudy then Chance Light Rain near Marysville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylor to Marysville?
The road trip is about 67.4 miles (108.5 km) and usually takes 01h 21m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Mount Clemens is a useful midpoint, sitting about 33.7 miles from Taylor and 33.7 miles from Marysville.
How much longer is the road route than the straight-line distance?
The direct path is about 61.1 miles (98.4 km), while the road route adds roughly 6.3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 3:48 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $10.93 one way or $21.87 round trip. Estimated CO2 is about 21.2 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Taylor and Mostly Cloudy then Chance Light Rain near Marysville.
Stop Ideas Near Mount Clemens
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
City of Ferndale City Hall
City of Madison Heights
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Mount Clemens.
Royal Oak station
Troy Transit Center
Birmingham, Michigan
Detroit
Flight Path Map
This map shows the direct air route between Taylor and Marysville. Straight-line distance: 61.16 mi (98.42 km).
#1 Taylor
The most populous city in Wayne County, Michigan.
| Population | 60,576 |
| Coordinates | 42.2408700, -83.2696500 |
| Altitude | 187 |
| Country | United States |
#2 Marysville
City in Saint Clair County, Michigan, United States of America
| Population | 9,649 |
| Coordinates | 42.9125300, -82.4868600 |
| Altitude | 187 |
| Country | United States |
End: Marysville (-82.48686, 42.91253)
Estimated Travel Time
Distance: 108 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 14m |
| 40 mph (64.37 km/h) | 01h 41m |
| 50 mph (80.47 km/h) | 01h 20m |
| 60 mph (96.56 km/h) | 01h 07m |
| 70 mph (112.65 km/h) | 00h 57m |
| 80 mph (129 km/h) | 00h 50m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.59 | $10.93 | $21.87 |
| Mid-grade | $5.25 | $12.49 | $24.97 |
| Premium | $5.85 | $13.91 | $27.82 |
| Diesel | $6.48 | $15.42 | $30.84 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Michigan · Oct 15, 2026