How far is Taylor, MI from Allendale, MI?
The driving distance from Taylor, MI to Allendale, MI is about 173.9 miles (279.8 km), with a travel time of about 03h 17m by car.
- The straight-line flight distance is about 145.5 miles (234.2 km).
- For a round trip, plan for roughly 06h 34m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 17m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Unincorporated community in Michigan
Route Weather Snapshot
Check the forecast at both ends before you head out.
Partly Sunny
Driving Route Map
The map below follows the saved road route between Taylor and Allendale.
Turn-by-Turn Driving Directions
Step-by-step road directions between Taylor and Allendale.
-
1
Start on Wick Road
1.6 km · 2 min · Wick Road
-
2
Turn right onto South Beech Daly Road
1.6 km · 2 min · South Beech Daly Road
-
3
Turn left onto Ecorse Road
2533 ft · 49 sec · Ecorse Road
-
4
Take the ramp slight right toward I 94 West: Chicago
1240 ft · 30 sec
-
5
Merge slight right onto Detroit Industrial Expressway
5.4 mi · 6 min · Detroit Industrial Expressway
-
6
Take the exit slight right toward I 275: Toledo, Flint
1531 ft · 37 sec
-
7
Keep slight right to continue on I 275 North: Flint
1.3 km · 2 min
-
8
Merge slight left
29.2 mi · 31 min
-
9
Continue straight
8.6 mi · 9 min
-
10
Keep slight left
54.8 mi · 59 min
-
11
Keep slight left to continue on I 96 West: Grand Rapids
53.7 mi · 58 min
-
12
Keep slight left to continue on Gerald R Ford Freeway
5.6 mi · 7 min · Gerald R Ford Freeway
-
13
Take the exit slight right toward M 45 West: Lake Michigan Drive
1419 ft · 35 sec
-
14
Continue on Lake Michigan Drive Northwest
12.6 mi · 19 min · Lake Michigan Drive Northwest
-
15
Arrive at your destination
0 m · 1 sec · Lake Michigan Drive
Car Route Details
A richer read on the saved driving route between Taylor and Allendale.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 275 North
Keep slight left
54.8 mi · 00h 59m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Partly Sunny leaving Taylor and Partly Sunny near Allendale.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Taylor to Allendale?
The road trip is about 173.9 miles (279.8 km) and usually takes 03h 17m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Holt is a useful midpoint, sitting about 86.8 miles from Taylor and 87.1 miles from Allendale.
How much longer is the road route than the straight-line distance?
The direct path is about 145.5 miles (234.2 km), while the road route adds roughly 28.4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 10:26 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $23.15 one way or $46.31 round trip. Estimated CO2 is about 54.6 kg one way.
What should you check before leaving?
Before you leave, expect Partly Sunny around Taylor and Partly Sunny near Allendale.
Stop Ideas Near Holt
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Holt.
East Lansing station
Jackson station
Albion station
Owosso, MI
Flight Path Map
This map shows the direct air route between Taylor and Allendale. Straight-line distance: 145.54 mi (234.22 km).
#1 Taylor
The most populous city in Wayne County, Michigan.
| Population | 60,576 |
| Coordinates | 42.2408700, -83.2696500 |
| Altitude | 187 |
| Country | United States |
#2 Allendale
Borough in Bergen County, New Jersey
| Population | 6,505 |
| Coordinates | 42.9722500, -85.9536500 |
| Altitude | 199 |
| Country | United States |
End: Allendale (-85.95365, 42.97225)
Estimated Travel Time
Distance: 280 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 05h 47m |
| 40 mph (64.37 km/h) | 04h 20m |
| 50 mph (80.47 km/h) | 03h 28m |
| 60 mph (96.56 km/h) | 02h 53m |
| 70 mph (112.65 km/h) | 02h 29m |
| 80 mph (129 km/h) | 02h 10m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $23.15 | $46.31 |
| Mid-grade | $4.25 | $26.11 | $52.23 |
| Premium | $4.65 | $28.58 | $57.15 |
| Diesel | $5.30 | $32.57 | $65.13 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Michigan · Apr 17, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.