How far is Tannersville, PA from Jim Thorpe, PA?

The driving distance from Tannersville, PA to Jim Thorpe, PA is about 35 miles (56.3 km), with a travel time of about 00h 53m by car.

  • The straight-line flight distance is about 25 miles (40.2 km).
  • For a round trip, plan for roughly 01h 46m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
35.01 mi
00h 53m
Flight
24.99 mi
40.21 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Tannersville.

Flight Distance

Direct air line
24.99 mi
Kilometers
40.21 km
Flight Time
00h 03m

Driving Distance

Road route
35.01 mi
Kilometers
56.35 km
Drive Time
00h 53m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 00h 53m.

Arrival Snapshot
Arrive in Jim Thorpe
Thu, Oct 15, 5:38 PM EDT
Return by in Tannersville
Thu, Oct 15, 6:32 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Tannersville
2026-10-15T16:45
Arrive Jim Thorpe
Thu, Oct 15, 5:38 PM EDT
Route Timing
00h 53m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
8:53 AM to 10:53 AM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
4:44 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Tannersville
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Pocono Pines
PA

Census designated place

From Tannersville
17.5 mi
00h 26m
To Jim Thorpe
17.5 mi
00h 26m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
63°F
Thursday

Sunny

Starts
Thu, Oct 15 6:00 AM EDT
Wind
5 mph NE
Destination
64°F
This Afternoon

Mostly Sunny

Starts
Thu, Oct 15 1:00 PM EDT
Wind
5 mph SE

Driving Route Map

The map below follows the saved road route between Tannersville and Jim Thorpe.

Turn-by-Turn Driving Directions

Step-by-step road directions between Tannersville and Jim Thorpe.

  1. 1

    Start on Learn Road

    886 ft · 46 sec · Learn Road

  2. 2

    Turn sharp right onto Pigeon Way

    839 ft · 37 sec · Pigeon Way

  3. 3

    Turn slight right onto Route 611

    2005 ft · 53 sec · Route 611

  4. 4

    Continue straight

    705 ft · 16 sec

  5. 5

    Turn right onto Sullivan Trail

    961 ft · 21 sec · Sullivan Trail

  6. 6

    Take the ramp straight toward I 80 West, PA 715 Truck North: Hazleton

    1167 ft · 29 sec

  7. 7

    Merge slight left onto Keystone Shortway

    14.2 mi · 17 min · Keystone Shortway

  8. 8

    Take the exit slight right toward PA 115: Brodheadsville, Blakeslee

    2148 ft · 52 sec

  9. 9

    Keep slight left

    55 m · 4 sec

  10. 10

    Turn left

    2.1 mi · 3 min

  11. 11

    Turn right

    17 mi · 29 min

  12. 12

    Turn right onto West 6th Street

    41 m · 6 sec · West 6th Street

  13. 13

    Arrive at your destination

    0 m · 1 sec · West 6th Street

Car Route Details

A richer read on the saved driving route between Tannersville and Jim Thorpe.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
13 steps
6 turns on the saved route
Ramps & Exits
3
1 merges, 2 ramps or exits
Navigation Density
37.1 / 100 mi
Decision points by distance
Main Roads
Keystone Shortway
14.2 mi · 41%
Route 611
0.51 mi · 1%
PA 115
0.44 mi · 1%
I 80 West
0.22 mi · 1%
Sullivan Trail
0.18 mi · 1%
Learn Road
0.17 mi
Longest Stretch

Longest stretch

Turn right

17 mi · 00h 29m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
00h 53m
Day trip friendly
Same-Day Return
01h 46m
Round-trip wheel time
Road vs Air
+10 mi
25 mi direct line
Halfway Stop
Pocono Pines
00h 26m from Tannersville
Leave By
4:44 PM EDT
Morning start is best
Weather Watch

Sunny leaving Tannersville and Mostly Sunny near Jim Thorpe.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Tannersville to Jim Thorpe?

The road trip is about 35 miles (56.3 km) and usually takes 00h 53m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Pocono Pines is a useful midpoint, sitting about 17.5 miles from Tannersville and 17.5 miles from Jim Thorpe.

How much longer is the road route than the straight-line distance?

The direct path is about 25 miles (40.2 km), while the road route adds roughly 10 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:44 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $5.54 one way or $11.07 round trip. Estimated CO2 is about 11 kg one way.

What should you check before leaving?

Before you leave, expect Sunny around Tannersville and Mostly Sunny near Jim Thorpe.

Stop Ideas Near Pocono Pines

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Pocono Pines, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Pocono Pines.

BUS

White Haven, PA

21 mi away
I-476, Exit 95/I-80, Exit 277, at Hwy 940
BUS

Scranton, PA

38 mi away
23 Lackawanna Avenue
BUS

Wilkes-Barre, PA

39 mi away
47 South Washington Street
RAIL

New Brunswick station

109 mi away
French and Albany Streets

Flight Path Map

This map shows the direct air route between Tannersville and Jim Thorpe. Straight-line distance: 24.99 mi (40.21 km).

Photo coming soon

#1 Tannersville

Situated in Monroe County at an elevation of roughly 883 feet, this village lies within the Pocono Mountains region of northeastern Pennsylvania.

Population0
Coordinates41.0400900, -75.3057400
Altitude269
CountryUnited States
Jim Thorpe

#2 Jim Thorpe

Borough and county seat of Carbon County, Pennsylvania

Population4,650
Coordinates40.8759200, -75.7324100
Altitude220
CountryUnited States
Start: Tannersville (-75.30574, 41.04009)
End: Jim Thorpe (-75.73241, 40.87592)

Estimated Travel Time

Distance: 56 km by road

SpeedTime
30 mph (48.3 km/h)01h 10m
40 mph (64.37 km/h)00h 52m
50 mph (80.47 km/h)00h 42m
60 mph (96.56 km/h)00h 35m
70 mph (112.65 km/h)00h 30m
80 mph (129 km/h)00h 26m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
1.24 gal
4.68 L · about $5.54
Round trip
$11.07
2.48 gal · 9.36 L
Estimated CO2
11 kg one way
Round trip: 22 kg / 49 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $4.46 $5.54 $11.07
Mid-grade $4.93 $6.11 $12.21
Premium $5.31 $6.58 $13.16
Diesel $6.55 $8.12 $16.24

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Pennsylvania · Oct 15, 2026

There is no time difference between Tannersville and Jim Thorpe. The current time is 16:45:35.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.