How far is Jim Thorpe, PA from Tannersville, PA?

The driving distance from Jim Thorpe, PA to Tannersville, PA is about 34.9 miles (56.2 km), with a travel time of about 00h 44m by car.

  • The straight-line flight distance is about 25 miles (40.2 km).
  • For a round trip, plan for roughly 01h 28m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Trip Tools

Reverse, save, or send this route

This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
34.93 mi
00h 44m
Flight
24.99 mi
40.21 km direct

This is an easy same-day return drive.

Learn Distance

Choose another destination from Jim Thorpe.

Flight Distance

Direct air line
24.99 mi
Kilometers
40.21 km
Flight Time
00h 03m

Driving Distance

Road route
34.93 mi
Kilometers
56.22 km
Drive Time
00h 44m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 00h 44m.

Arrival Snapshot
Arrive in Tannersville
Thu, Oct 15, 5:30 PM EDT
Return by in Jim Thorpe
Thu, Oct 15, 6:14 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Jim Thorpe
2026-10-15T16:45
Arrive Tannersville
Thu, Oct 15, 5:30 PM EDT
Route Timing
00h 44m
One way by road
Best Departure Window
7:00 AM to 7:00 PM EDT
Leave when it suits your day
Arrive between
7:44 AM to 7:44 PM EDT

This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.

Leave by
7:02 PM EDT
Keeps a same-day return open with about 01h 30m at the destination.
Back in Jim Thorpe
10:00 PM EDT
Flexible departure

This departure sits inside the recommended comfort window for the route.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Pocono Pines
PA

Census designated place

From Jim Thorpe
17.6 mi
00h 22m
To Tannersville
17.3 mi
00h 22m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
64°F
This Afternoon

Mostly Sunny

Starts
Thu, Oct 15 1:00 PM EDT
Wind
5 mph SE
Destination
63°F
Thursday

Sunny

Starts
Thu, Oct 15 6:00 AM EDT
Wind
5 mph NE

Driving Route Map

The map below follows the saved road route between Jim Thorpe and Tannersville.

Turn-by-Turn Driving Directions

Step-by-step road directions between Jim Thorpe and Tannersville.

  1. 1

    Start on West 6th Street

    41 m · 12 sec · West 6th Street

  2. 2

    Turn left onto North Street

    17 mi · 29 min · North Street

  3. 3

    At the end of the road, turn left

    1.8 mi · 3 min

  4. 4

    Take the ramp right

    1463 ft · 36 sec

  5. 5

    Merge slight left onto Keystone Shortway

    14.7 mi · 18 min · Keystone Shortway

  6. 6

    Take the exit slight right toward PA 715: Tannersville

    887 ft · 23 sec

  7. 7

    Turn right

    2889 ft · 59 sec

  8. 8

    At the end of the road, turn right onto Route 611

    2159 ft · 56 sec · Route 611

  9. 9

    Turn left onto Pigeon Way

    23 m · 4 sec · Pigeon Way

  10. 10

    Continue on Pigeon Way

    679 ft · 37 sec · Pigeon Way

  11. 11

    Turn sharp left onto Learn Road

    574 ft · 25 sec · Learn Road

  12. 12

    Keep slight left to continue on Learn Road

    95 m · 14 sec · Learn Road

  13. 13

    Arrive at your destination

    0 m · 1 sec · Learn Road

Car Route Details

A richer read on the saved driving route between Jim Thorpe and Tannersville.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
13 steps
6 turns on the saved route
Ramps & Exits
3
1 merges, 2 ramps or exits
Navigation Density
37.2 / 100 mi
Decision points by distance
Main Roads
North Street
17.3 mi · 49%
Keystone Shortway
14.7 mi · 42%
Route 611
0.41 mi · 1%
PA 715
0.17 mi
Learn Road
0.17 mi
Pigeon Way
0.14 mi
Longest Stretch

North Street

Turn left onto North Street

17 mi · 00h 29m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A short regional drive

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

Drive Time
00h 44m
Quick drive
Same-Day Return
01h 28m
Round-trip wheel time
Road vs Air
+9.9 mi
25 mi direct line
Halfway Stop
Pocono Pines
00h 22m from Jim Thorpe
Leave By
7:02 PM EDT
Flexible departure
Weather Watch

Mostly Sunny leaving Jim Thorpe and Sunny near Tannersville.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Jim Thorpe to Tannersville?

The road trip is about 34.9 miles (56.2 km) and usually takes 00h 44m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

What is the halfway point on this route?

Pocono Pines is a useful midpoint, sitting about 17.6 miles from Jim Thorpe and 17.3 miles from Tannersville.

How much longer is the road route than the straight-line distance?

The direct path is about 25 miles (40.2 km), while the road route adds roughly 9.9 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:02 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $5.49 one way or $10.98 round trip. Estimated CO2 is about 10.9 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Jim Thorpe and Sunny near Tannersville.

Stop Ideas Near Pocono Pines

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Pocono Pines, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Pocono Pines.

BUS

White Haven, PA

21 mi away
I-476, Exit 95/I-80, Exit 277, at Hwy 940
BUS

Scranton, PA

38 mi away
23 Lackawanna Avenue
BUS

Wilkes-Barre, PA

39 mi away
47 South Washington Street
RAIL

New Brunswick station

109 mi away
French and Albany Streets

Flight Path Map

This map shows the direct air route between Jim Thorpe and Tannersville. Straight-line distance: 24.99 mi (40.21 km).

Jim Thorpe

#1 Jim Thorpe

Borough and county seat of Carbon County, Pennsylvania

Population4,650
Coordinates40.8759200, -75.7324100
Altitude220
CountryUnited States
Photo coming soon

#2 Tannersville

Situated in Monroe County at an elevation of roughly 883 feet, this village lies within the Pocono Mountains region of northeastern Pennsylvania.

Population0
Coordinates41.0400900, -75.3057400
Altitude269
CountryUnited States
Start: West 6th Street (-75.732549, 40.875784)
End: Learn Road (-75.305744, 41.040046)

Estimated Travel Time

Distance: 56 km by road

SpeedTime
30 mph (48.3 km/h)01h 09m
40 mph (64.37 km/h)00h 52m
50 mph (80.47 km/h)00h 41m
60 mph (96.56 km/h)00h 34m
70 mph (112.65 km/h)00h 29m
80 mph (129 km/h)00h 26m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
1.23 gal
4.67 L · about $5.49
Round trip
$10.98
2.46 gal · 9.34 L
Estimated CO2
10.9 kg one way
Round trip: 21.9 kg / 48 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $4.46 $5.49 $10.98
Mid-grade $4.93 $6.06 $12.12
Premium $5.31 $6.53 $13.05
Diesel $6.55 $8.06 $16.11

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Pennsylvania · Oct 15, 2026

There is no time difference between Jim Thorpe and Tannersville. The current time is 16:45:35.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.