How far is South Bel Air, MD from Hyattsville, MD?
The driving distance from South Bel Air, MD to Hyattsville, MD is about 59.2 miles (95.2 km), with a travel time of about 01h 26m by car.
- The straight-line flight distance is about 51.4 miles (82.8 km).
- For a round trip, plan for roughly 02h 52m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 26m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Village in Frederick County, Maryland, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny then Rain Showers Likely
Rain Showers
Driving Route Map
The map below follows the saved road route between South Bel Air and Hyattsville.
Turn-by-Turn Driving Directions
Step-by-step road directions between South Bel Air and Hyattsville.
-
1
Start on South Shamrock Road
1811 ft · 1 min · South Shamrock Road
-
2
At the end of the road, turn right onto East MacPhail Road
1341 ft · 45 sec · East MacPhail Road
-
3
Turn left onto South Main Street
151 m · 14 sec · South Main Street
-
4
Continue on Emmorton Road
3158 ft · 1 min · Emmorton Road
-
5
Turn right onto West Ring Factory Road
3105 ft · 2 min · West Ring Factory Road
-
6
Turn left onto Vietnam Veterans Memorial Highway
3.9 mi · 6 min · Vietnam Veterans Memorial Highway
-
7
Take the exit slight right toward I 95 South: Baltimore
1 km · 1 min
-
8
Merge slight left onto John F. Kennedy Memorial Highway
8.1 mi · 9 min · John F. Kennedy Memorial Highway
-
9
Keep slight left to continue on Express Toll Lanes
6.5 mi · 8 min · Express Toll Lanes
-
10
Keep slight left to continue on Express Toll Lanes
1.2 mi · 2 min · Express Toll Lanes
-
11
Merge slight right onto Harbor Tunnel Thruway
3.8 mi · 5 min · Harbor Tunnel Thruway
-
12
Continue on Baltimore Harbor Tunnel
1.4 mi · 2 min · Baltimore Harbor Tunnel
-
13
Continue on Harbor Tunnel Thruway
2.2 mi · 3 min · Harbor Tunnel Thruway
-
14
Continue on Harbor Tunnel Throughway
2567 ft · 40 sec · Harbor Tunnel Throughway
-
15
Keep slight left to continue on Harbor Tunnel Throughway
2671 ft · 42 sec · Harbor Tunnel Throughway
-
16
Continue on Harbor Tunnel Thruway
1.3 mi · 2 min · Harbor Tunnel Thruway
-
17
Take the exit slight right toward MD 295 South: Essex, BWI Marshall Airport
2423 ft · 59 sec
-
18
Merge slight left onto Baltimore-Washington Parkway
23.8 mi · 32 min · Baltimore-Washington Parkway
-
19
Take the exit slight right toward MD 410: New Carrollton, Hyattsville
1209 ft · 33 sec
-
20
Turn right onto Riverdale Road
1 km · 1 min · Riverdale Road
-
21
Continue on East-West Highway
1.2 mi · 3 min · East-West Highway
-
22
Turn left onto Baltimore Avenue
2728 ft · 2 min · Baltimore Avenue
-
23
Turn right onto Longfellow Street
40 m · 11 sec · Longfellow Street
-
24
Turn left onto Kennedy Street
1058 ft · 52 sec · Kennedy Street
-
25
At the end of the road, turn left onto 43rd Avenue
54 m · 10 sec · 43rd Avenue
-
26
Turn right onto Kennedy Street
645 ft · 28 sec · Kennedy Street
-
27
Arrive at your destination
0 m · 1 sec · Kennedy Street
Car Route Details
A richer read on the saved driving route between South Bel Air and Hyattsville.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Baltimore-Washington Parkway
Merge slight left onto Baltimore-Washington Parkway
23.8 mi · 00h 32m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny then Rain Showers Likely leaving South Bel Air and Rain Showers near Hyattsville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from South Bel Air to Hyattsville?
The road trip is about 59.2 miles (95.2 km) and usually takes 01h 26m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Rosemont is a useful midpoint, sitting about 29.6 miles from South Bel Air and 29.6 miles from Hyattsville.
How much longer is the road route than the straight-line distance?
The direct path is about 51.4 miles (82.8 km), while the road route adds roughly 7.8 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 3:38 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $8.86 one way or $17.72 round trip. Estimated CO2 is about 18.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny then Rain Showers Likely around South Bel Air and Rain Showers near Hyattsville.
Stop Ideas Near Rosemont
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Rosemont.
BWI Rail Station
Pennsylvania Station
New Carrollton station
Kent Island, MD
Flight Path Map
This map shows the direct air route between South Bel Air and Hyattsville. Straight-line distance: 51.47 mi (82.83 km).
#1 South Bel Air
A census-designated place in Anne Arundel County, Maryland.
| Population | 48,828 |
| Coordinates | 39.5331600, -76.3374600 |
| Altitude | 109 |
| Country | United States |
#2 Hyattsville
City in Prince George’s County, Maryland, United States
| Population | 18,217 |
| Coordinates | 38.9559400, -76.9455300 |
| Altitude | 32 |
| Country | United States |
End: Hyattsville (-76.94553, 38.95594)
Estimated Travel Time
Distance: 95 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 58m |
| 40 mph (64.37 km/h) | 01h 28m |
| 50 mph (80.47 km/h) | 01h 10m |
| 60 mph (96.56 km/h) | 00h 59m |
| 70 mph (112.65 km/h) | 00h 50m |
| 80 mph (129 km/h) | 00h 44m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.24 | $8.86 | $17.72 |
| Mid-grade | $4.84 | $10.12 | $20.24 |
| Premium | $5.15 | $10.76 | $21.51 |
| Diesel | $6.36 | $13.30 | $26.59 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Oct 15, 2026