How far is South Bel Air, MD from Bryans Road, MD?

The driving distance from South Bel Air, MD to Bryans Road, MD is about 85.5 miles (137.6 km), with a travel time of about 02h 02m by car.

  • The straight-line flight distance is about 74 miles (119.1 km).
  • For a round trip, plan for roughly 04h 05m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
85.49 mi
02h 02m
Flight
74 mi
119.09 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from South Bel Air.

Flight Distance

Direct air line
74 mi
Kilometers
119.09 km
Flight Time
00h 08m

Driving Distance

Road route
85.49 mi
Kilometers
137.58 km
Drive Time
02h 02m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 02m.

Arrival Snapshot
Arrive in Bryans Road
Wed, Sep 23, 12:57 PM EDT
Return by in South Bel Air
Wed, Sep 23, 3:00 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave South Bel Air
2026-09-23T10:55
Arrive Bryans Road
Wed, Sep 23, 12:57 PM EDT
Route Timing
02h 02m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:03 AM to 12:03 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
2:24 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in South Bel Air
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Fort George G Mead Junction
MD

City in Howard County, Maryland, United States of America

From South Bel Air
42.7 mi
01h 01m
To Bryans Road
42.8 mi
01h 01m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
65°F
Wednesday

Chance Light Rain then Cloudy

Starts
Wed, Sep 23 6:00 AM EDT
Wind
14 mph NE
Destination
63°F
Wednesday

Light Rain Likely

Starts
Wed, Sep 23 6:00 AM EDT
Wind
13 mph NE

Driving Route Map

The map below follows the saved road route between South Bel Air and Bryans Road.

Turn-by-Turn Driving Directions

Step-by-step road directions between South Bel Air and Bryans Road.

  1. 1

    Start on South Shamrock Road

    1811 ft · 1 min · South Shamrock Road

  2. 2

    At the end of the road, turn right onto East MacPhail Road

    1341 ft · 45 sec · East MacPhail Road

  3. 3

    Turn left onto South Main Street

    151 m · 14 sec · South Main Street

  4. 4

    Continue on Emmorton Road

    3158 ft · 1 min · Emmorton Road

  5. 5

    Turn right onto West Ring Factory Road

    3105 ft · 2 min · West Ring Factory Road

  6. 6

    Turn left onto Vietnam Veterans Memorial Highway

    3.9 mi · 6 min · Vietnam Veterans Memorial Highway

  7. 7

    Take the exit slight right toward I 95 South: Baltimore

    1 km · 1 min

  8. 8

    Merge slight left onto John F. Kennedy Memorial Highway

    8.1 mi · 9 min · John F. Kennedy Memorial Highway

  9. 9

    Keep slight left to continue on Express Toll Lanes

    6.5 mi · 8 min · Express Toll Lanes

  10. 10

    Keep slight left to continue on Express Toll Lanes

    1.2 mi · 2 min · Express Toll Lanes

  11. 11

    Merge slight right onto Harbor Tunnel Thruway

    3.8 mi · 5 min · Harbor Tunnel Thruway

  12. 12

    Continue on Baltimore Harbor Tunnel

    1.4 mi · 2 min · Baltimore Harbor Tunnel

  13. 13

    Continue on Harbor Tunnel Thruway

    2.2 mi · 3 min · Harbor Tunnel Thruway

  14. 14

    Continue on Harbor Tunnel Throughway

    2567 ft · 40 sec · Harbor Tunnel Throughway

  15. 15

    Keep slight left to continue on Harbor Tunnel Throughway

    2671 ft · 42 sec · Harbor Tunnel Throughway

  16. 16

    Continue on Harbor Tunnel Thruway

    1.3 mi · 2 min · Harbor Tunnel Thruway

  17. 17

    Take the exit slight right toward MD 295 South: Essex, BWI Marshall Airport

    2423 ft · 59 sec

  18. 18

    Merge slight left onto Baltimore-Washington Parkway

    27.1 mi · 37 min · Baltimore-Washington Parkway

  19. 19

    Keep slight left to continue on US 50 East: Richmond, Annapolis

    2902 ft · 35 sec

  20. 20

    Continue on Kenilworth Avenue Freeway

    2.2 mi · 3 min · Kenilworth Avenue Freeway

  21. 21

    Continue on Anacostia Freeway

    8.4 mi · 13 min · Anacostia Freeway

  22. 22

    Keep slight right to continue on Indian Head

    1.6 km · 2 min

  23. 23

    Keep slight left to continue on MD 210 South

    1391 ft · 34 sec

  24. 24

    Merge slight left onto Indian Head Highway

    9.6 mi · 14 min · Indian Head Highway

  25. 25

    Continue on Indian Head Highway

    4 mi · 6 min · Indian Head Highway

  26. 26

    Turn left onto Livingston Road

    19 m · 1 sec · Livingston Road

  27. 27

    Arrive at your destination

    0 m · 1 sec · Livingston Road

Car Route Details

A richer read on the saved driving route between South Bel Air and Bryans Road.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
27 steps
5 turns on the saved route
Ramps & Exits
6
4 merges, 2 ramps or exits
Navigation Density
31.6 / 100 mi
Decision points by distance
Main Roads
Baltimore-Washington Parkway
27.1 mi · 32%
Indian Head Highway
13.6 mi · 16%
Anacostia Freeway
8.43 mi · 10%
John F. Kennedy Memorial Highway
8.15 mi · 10%
Express Toll Lanes
7.68 mi · 9%
Harbor Tunnel Thruway
7.28 mi · 9%
Longest Stretch

Baltimore-Washington Parkway

Merge slight left onto Baltimore-Washington Parkway

27.1 mi · 00h 37m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 02m
Day trip friendly
Same-Day Return
04h 06m
Round-trip wheel time
Road vs Air
+11.5 mi
74 mi direct line
Halfway Stop
Fort George G Mead Junction
01h 01m from South Bel Air
Leave By
2:24 PM EDT
Morning start is best
Weather Watch

Chance Light Rain then Cloudy leaving South Bel Air and Light Rain Likely near Bryans Road.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from South Bel Air to Bryans Road?

The road trip is about 85.5 miles (137.6 km) and usually takes 02h 02m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Fort George G Mead Junction is a useful midpoint, sitting about 42.7 miles from South Bel Air and 42.8 miles from Bryans Road.

How much longer is the road route than the straight-line distance?

The direct path is about 74 miles (119.1 km), while the road route adds roughly 11.5 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:24 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $12.75 one way or $25.51 round trip. Estimated CO2 is about 26.8 kg one way.

What should you check before leaving?

Before you leave, expect Chance Light Rain then Cloudy around South Bel Air and Light Rain Likely near Bryans Road.

Stop Ideas Near Fort George G Mead Junction

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Fort George G Mead Junction, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Fort George G Mead Junction.

RAIL

BWI Rail Station

11 mi away
7 Amtrak Way
RAIL

New Carrollton station

20 mi away
4300 Garden City Drive
RAIL

Pennsylvania Station

25 mi away
1515 North Charles Street
RAIL

Rockville station

31 mi away
251 Hungerford Drive at Park Rd.

Flight Path Map

This map shows the direct air route between South Bel Air and Bryans Road. Straight-line distance: 74 mi (119.09 km).

Photo coming soon

#1 South Bel Air

A census-designated place in Anne Arundel County, Maryland.

Population48,828
Coordinates39.5331600, -76.3374600
Altitude109
CountryUnited States
Bryans Road

#2 Bryans Road

Census designated place

Population7,244
Coordinates38.6270600, -77.0730300
Altitude54
CountryUnited States
Start: South Bel Air (-76.33746, 39.53316)
End: Bryans Road (-77.07303, 38.62706)

Estimated Travel Time

Distance: 138 km by road

SpeedTime
30 mph (48.3 km/h)02h 50m
40 mph (64.37 km/h)02h 08m
50 mph (80.47 km/h)01h 42m
60 mph (96.56 km/h)01h 25m
70 mph (112.65 km/h)01h 13m
80 mph (129 km/h)01h 03m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
3.02 gal
11.42 L · about $12.75
Round trip
$25.51
6.04 gal · 22.84 L
Estimated CO2
26.8 kg one way
Round trip: 53.7 kg / 118 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $4.22 $12.75 $25.51
Mid-grade $4.84 $14.62 $29.25
Premium $5.17 $15.62 $31.24
Diesel $6.49 $19.60 $39.21

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Maryland · Sep 22, 2026

There is no time difference between South Bel Air and Bryans Road. The current time is 10:55:02.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.