How far is Schenectady, NY from Hillside, NY?
The driving distance from Schenectady, NY to Hillside, NY is about 171 miles (275.2 km), with a travel time of about 03h 31m by car.
- The straight-line flight distance is about 145.8 miles (234.6 km).
- For a round trip, plan for roughly 07h 03m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EST.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 31m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census-designated place in Ulster County, New York
Route Weather Snapshot
Check the forecast at both ends before you head out.
Sunny
Driving Route Map
The map below follows the saved road route between Schenectady and Hillside.
Turn-by-Turn Driving Directions
Step-by-step road directions between Schenectady and Hillside.
-
1
Start on Jay Street
28 m · 10 sec · Jay Street
-
2
Turn left onto Liberty Street
531 ft · 21 sec · Liberty Street
-
3
Turn left onto Broadway
1.3 km · 2 min · Broadway
-
4
Take the ramp sharp left
1394 ft · 34 sec
-
5
Merge slight left
3.5 mi · 5 min
-
6
Keep slight left
2004 ft · 53 sec
-
7
Keep slight left to continue on I 90 East: Albany
1.1 km · 2 min
-
8
Merge slight left onto New York State Thruway
4.5 mi · 5 min · New York State Thruway
-
9
Keep slight right to continue on New York State Thruway
118.2 mi · 2 hr 16 min · New York State Thruway
-
10
Keep slight right to continue on I 287 South, NJ 17 South: New Jersey
1.5 km · 60 sec
-
11
Continue straight
2496 ft · 39 sec
-
12
Keep slight left to continue on NJ 17 South: Mahwah
14.1 mi · 19 min
-
13
Take the exit slight right toward NJ 4, GSP South: Paterson, Fort Lee, New York
566 ft · 19 sec
-
14
Keep slight left to continue on NJ 4 East: Fort Lee, New York
2455 ft · 1 min
-
15
Merge slight left
1417 ft · 24 sec
-
16
Continue straight
6.4 mi · 9 min
-
17
Take the exit slight left toward I 95 North: George Washington Bridge
1124 ft · 18 sec
-
18
Merge slight left
1.2 km · 55 sec
-
19
Keep slight left
1.3 km · 1 min
-
20
Continue on George Washington Bridge (upper level)
3174 ft · 1 min · George Washington Bridge (upper level)
-
21
Continue on Trans-Manhattan Expressway
1.2 km · 1 min · Trans-Manhattan Expressway
-
22
Continue on Cross Bronx Expressway
4.7 mi · 6 min · Cross Bronx Expressway
-
23
Keep slight right to continue on Cross Bronx Expressway
2 mi · 3 min · Cross Bronx Expressway
-
24
Merge slight left onto Throgs Neck Expressway
3271 ft · 58 sec · Throgs Neck Expressway
-
25
Continue on Throgs Neck Bridge
2 mi · 3 min · Throgs Neck Bridge
-
26
Continue on Clearview Expressway
5 mi · 5 min · Clearview Expressway
-
27
Turn right onto Hillside Avenue
2.1 mi · 4 min · Hillside Avenue
-
28
Turn left onto 171st Street
1577 ft · 1 min · 171st Street
-
29
At the end of the road, turn left onto Jamaica Avenue
550 ft · 9 sec · Jamaica Avenue
-
30
Arrive at your destination
0 m · 1 sec · Jamaica Avenue
Car Route Details
A richer read on the saved driving route between Schenectady and Hillside.
Interchange-aware route
The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.
New York State Thruway
Keep slight right to continue on New York State Thruway
118 mi · 02h 16m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Sunny leaving Schenectady and Sunny near Hillside.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Schenectady to Hillside?
The road trip is about 171 miles (275.2 km) and usually takes 03h 31m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Clintondale is a useful midpoint, sitting about 85.4 miles from Schenectady and 85.5 miles from Hillside.
How much longer is the road route than the straight-line distance?
The direct path is about 145.8 miles (234.6 km), while the road route adds roughly 25.2 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EST. If you want a more comfortable same-day return, try to leave by 9:56 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $26.26 one way or $52.52 round trip. Estimated CO2 is about 53.6 kg one way.
What should you check before leaving?
Before you leave, expect Sunny around Schenectady and Sunny near Hillside.
Stop Ideas Near Clintondale
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Clintondale.
Poughkeepsie station
Rhinecliff–Kingston station
Croton–Harmon station
Hudson
Flight Path Map
This map shows the direct air route between Schenectady and Hillside. Straight-line distance: 145.75 mi (234.56 km).
#1 Schenectady
The most populous city in Schenectady County, New York.
| Population | 65,231 |
| Coordinates | 42.8142400, -73.9395700 |
| Altitude | 74 |
| Country | United States |
#2 Hillside
Census-designated place in Ulster County, New York
| Population | 24,808 |
| Coordinates | 40.7078800, -73.7868000 |
| Altitude | 17 |
| Country | United States |
End: Hillside (-73.7868, 40.70788)
Estimated Travel Time
Distance: 275 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 05h 41m |
| 40 mph (64.37 km/h) | 04h 16m |
| 50 mph (80.47 km/h) | 03h 25m |
| 60 mph (96.56 km/h) | 02h 50m |
| 70 mph (112.65 km/h) | 02h 26m |
| 80 mph (129 km/h) | 02h 07m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.36 | $26.26 | $52.52 |
| Mid-grade | $4.90 | $29.56 | $59.12 |
| Premium | $5.31 | $32.01 | $64.01 |
| Diesel | $6.49 | $39.15 | $78.29 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in New York · Oct 31, 2026