How far is Redland, MD from Milford Mill, MD?
The driving distance from Redland, MD to Milford Mill, MD is about 39 miles (62.7 km), with a travel time of about 01h 01m by car.
- The straight-line flight distance is about 24.4 miles (39.3 km).
- For a round trip, plan for roughly 02h 02m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 01m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Carroll County, Maryland, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Rain Showers then Mostly Sunny
Chance Rain Showers then Partly Sunny
Driving Route Map
The map below follows the saved road route between Redland and Milford Mill.
Turn-by-Turn Driving Directions
Step-by-step road directions between Redland and Milford Mill.
-
1
Start on Redland Road
29 m · 9 sec · Redland Road
-
2
Turn left onto Muncaster Mill Road
1.3 mi · 2 min · Muncaster Mill Road
-
3
Turn right onto Woodfield Road
2.6 mi · 5 min · Woodfield Road
-
4
Turn right onto Warfield Road
1.1 mi · 3 min · Warfield Road
-
5
Enter the roundabout and take exit 3 toward Laytonsville Road
54 m · 4 sec · Laytonsville Road
-
6
Exit the roundabout onto Laytonsville Road
2436 ft · 53 sec · Laytonsville Road
-
7
Turn right onto Sundown Road
4.1 mi · 7 min · Sundown Road
-
8
Turn slight right onto Damascus Road
1 km · 1 min · Damascus Road
-
9
Turn sharp left onto Georgia Avenue
1.2 mi · 2 min · Georgia Avenue
-
10
Continue on Route 97
6.6 mi · 10 min · Route 97
-
11
Take the ramp slight right
2405 ft · 59 sec
-
12
Merge slight left
5.3 mi · 6 min
-
13
Keep slight left to continue on Baltimore
9.1 mi · 10 min
-
14
Take the exit slight right toward I 695 North, I 695 South: New York, Towson, Baltimore, Glen Burnie
1056 ft · 16 sec
-
15
Keep slight left to continue on I 695 North: New York, Towson
1.2 km · 2 min
-
16
Merge slight left onto Baltimore Beltway
2.2 mi · 3 min · Baltimore Beltway
-
17
Take the exit slight right toward MD 26: Liberty Road, Randallstown, Lochearn
120 m · 10 sec
-
18
Keep slight left to continue on MD 26 West: Randallstown, Liberty Road
1514 ft · 37 sec
-
19
Turn slight right onto MD 26 West: Randallstown
1050 ft · 45 sec
-
20
Turn straight onto Liberty Road
1.2 mi · 3 min · Liberty Road
-
21
Turn left onto North Rolling Road
1223 ft · 38 sec · North Rolling Road
-
22
Turn right onto Lages Lane
31 m · 9 sec · Lages Lane
-
23
Turn left onto Mayfield Avenue
1071 ft · 51 sec · Mayfield Avenue
-
24
At the end of the road, turn left onto Mayfield Avenue
1142 ft · 56 sec · Mayfield Avenue
-
25
Turn left onto Doe Ridge Drive
120 m · 23 sec · Doe Ridge Drive
-
26
Turn left onto Big Buck Drive
1354 ft · 1 min · Big Buck Drive
-
27
Arrive at your destination
0 m · 1 sec · Big Buck Drive
Car Route Details
A richer read on the saved driving route between Redland and Milford Mill.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Baltimore
Keep slight left to continue on Baltimore
9.14 mi · 00h 10m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Chance Rain Showers then Mostly Sunny leaving Redland and Chance Rain Showers then Partly Sunny near Milford Mill.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Redland to Milford Mill?
The road trip is about 39 miles (62.7 km) and usually takes 01h 01m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Sykesville is a useful midpoint, sitting about 19.4 miles from Redland and 19.5 miles from Milford Mill.
How much longer is the road route than the straight-line distance?
The direct path is about 24.4 miles (39.3 km), while the road route adds roughly 14.6 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:28 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $5.70 one way or $11.39 round trip. Estimated CO2 is about 12.2 kg one way.
What should you check before leaving?
Before you leave, expect Chance Rain Showers then Mostly Sunny around Redland and Chance Rain Showers then Partly Sunny near Milford Mill.
Stop Ideas Near Sykesville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Sykesville.
Pennsylvania Station
BWI Rail Station
Frederick Airport, MD
Rockville station
Flight Path Map
This map shows the direct air route between Redland and Milford Mill. Straight-line distance: 24.43 mi (39.31 km).
#1 Redland
A census-designated place in Prince George's County, Maryland.
| Population | 147,010 |
| Coordinates | 39.1453900, -77.1441500 |
| Altitude | 150 |
| Country | United States |
#2 Milford Mill
Census designated place
| Population | 29,042 |
| Coordinates | 39.3478800, -76.7699700 |
| Altitude | 151 |
| Country | United States |
End: Milford Mill (-76.76997, 39.34788)
Estimated Travel Time
Distance: 63 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 17m |
| 40 mph (64.37 km/h) | 00h 58m |
| 50 mph (80.47 km/h) | 00h 46m |
| 60 mph (96.56 km/h) | 00h 38m |
| 70 mph (112.65 km/h) | 00h 33m |
| 80 mph (129 km/h) | 00h 29m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.16 | $5.70 | $11.39 |
| Mid-grade | $4.76 | $6.52 | $13.04 |
| Premium | $5.07 | $6.94 | $13.89 |
| Diesel | $6.34 | $8.68 | $17.36 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Oct 17, 2026