How far is Randallstown, MD from Catonsville, MD?
The driving distance from Randallstown, MD to Catonsville, MD is about 8.9 miles (14.4 km), with a travel time of about 00h 16m by car.
- The straight-line flight distance is about 7.4 miles (11.9 km).
- For a round trip, plan for roughly 00h 33m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 16m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census designated place
Route Weather Snapshot
Check the forecast at both ends before you head out.
Sunny
Sunny
Driving Route Map
The map below follows the saved road route between Randallstown and Catonsville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Randallstown and Catonsville.
-
1
Start on Liberty Road
2.9 mi · 6 min · Liberty Road
-
2
Take the ramp slight right toward I 695 South: Glen Burnie
2205 ft · 54 sec
-
3
Merge slight left onto Baltimore Beltway
5 mi · 7 min · Baltimore Beltway
-
4
Take the exit slight right toward MD 144: Catonsville
1328 ft · 36 sec
-
5
Turn right onto Frederick Road
2086 ft · 1 min · Frederick Road
-
6
Turn right
11 m · 3 sec
-
7
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Randallstown and Catonsville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Baltimore Beltway
Merge slight left onto Baltimore Beltway
5 mi · 00h 07m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Sunny leaving Randallstown and Sunny near Catonsville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Randallstown to Catonsville?
The road trip is about 8.9 miles (14.4 km) and usually takes 00h 16m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Lochearn is a useful midpoint, sitting about 4.5 miles from Randallstown and 4.5 miles from Catonsville.
How much longer is the road route than the straight-line distance?
The direct path is about 7.4 miles (11.9 km), while the road route adds roughly 1.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:56 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.31 one way or $2.62 round trip. Estimated CO2 is about 2.8 kg one way.
What should you check before leaving?
Before you leave, expect Sunny around Randallstown and Sunny near Catonsville.
Stop Ideas Near Lochearn
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Lochearn.
Pennsylvania Station
BWI Rail Station
New Carrollton station
Rockville station
Flight Path Map
This map shows the direct air route between Randallstown and Catonsville. Straight-line distance: 7.4 mi (11.91 km).
#1 Randallstown
Census designated place
| Population | 32,430 |
| Coordinates | 39.3673300, -76.7952500 |
| Altitude | 176 |
| Country | United States |
#2 Catonsville
A city in Baltimore County, Maryland.
| Population | 41,567 |
| Coordinates | 39.2720500, -76.7319200 |
| Altitude | 146 |
| Country | United States |
End: (-76.731988, 39.272037)
Estimated Travel Time
Distance: 14 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 17m |
| 40 mph (64.37 km/h) | 00h 13m |
| 50 mph (80.47 km/h) | 00h 10m |
| 60 mph (96.56 km/h) | 00h 08m |
| 70 mph (112.65 km/h) | 00h 07m |
| 80 mph (129 km/h) | 00h 06m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $1.31 | $2.62 |
| Mid-grade | $4.60 | $1.47 | $2.94 |
| Premium | $4.95 | $1.59 | $3.17 |
| Diesel | $5.98 | $1.91 | $3.83 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.