How far is Pulaski, MI from Clinton Township, MI?

The driving distance from Pulaski, MI to Clinton Township, MI is about 114.3 miles (184 km), with a travel time of about 02h 00m by car.

  • The straight-line flight distance is about 93.8 miles (151 km).
  • For a round trip, plan for roughly 04h 00m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
114.31 mi
02h 00m
Flight
93.8 mi
150.96 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Pulaski.

Flight Distance

Direct air line
93.8 mi
Kilometers
150.96 km
Flight Time
00h 11m

Driving Distance

Road route
114.31 mi
Kilometers
183.96 km
Drive Time
02h 00m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 00m.

Arrival Snapshot
Arrive in Clinton Township
Mon, May 4, 9:12 PM EDT
Return by in Pulaski
Mon, May 4, 11:12 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Pulaski
2026-05-04T19:12
Arrive Clinton Township
Mon, May 4, 9:12 PM EDT
Route Timing
02h 00m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:00 AM to 12:00 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
2:30 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Pulaski
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Northfield
MI

Township in Washtenaw County, Michigan

From Pulaski
57 mi
01h 00m
To Clinton Township
57.3 mi
01h 00m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
73°F
Monday

Sunny then Slight Chance Showers And Thunderstorms

Starts
Mon, May 4 6:00 AM EDT
Wind
8 to 16 mph SW
Destination
76°F
Monday

Sunny then Slight Chance Rain Showers

Starts
Mon, May 4 6:00 AM EDT
Wind
9 to 16 mph SW

Driving Route Map

The map below follows the saved road route between Pulaski and Clinton Township.

Turn-by-Turn Driving Directions

Step-by-step road directions between Pulaski and Clinton Township.

  1. 1

    Start on Pulaski Road

    3.6 mi · 6 min · Pulaski Road

  2. 2

    Continue on South Main Street

    1 mi · 2 min · South Main Street

  3. 3

    Turn right onto Spring Arbor Road

    4.7 mi · 7 min · Spring Arbor Road

  4. 4

    Continue on West Main Street

    1.4 km · 2 min · West Main Street

  5. 5

    Continue on Spring Arbor Road

    3.6 mi · 5 min · Spring Arbor Road

  6. 6

    Turn straight onto M-60

    2.9 mi · 3 min · M-60

  7. 7

    Keep slight right to continue on I 94 East: Detroit

    2366 ft · 57 sec

  8. 8

    Merge slight left

    34.8 mi · 37 min

  9. 9

    Keep slight left to continue on M 14: Plymouth

    4.7 mi · 5 min

  10. 10

    Keep right to continue on M 14 East, US 23 South: Plymouth

    2.4 mi · 3 min

  11. 11

    Keep slight left to continue on M 14 East: Plymouth, Livonia

    15.1 mi · 16 min

  12. 12

    Continue straight

    9.2 mi · 10 min

  13. 13

    Keep slight left to continue on Jeffries Freeway (Express)

    5.3 mi · 6 min · Jeffries Freeway (Express)

  14. 14

    Take the exit slight right toward Davison Avenue

    1519 ft · 37 sec

  15. 15

    Continue straight

    2.2 mi · 5 min

  16. 16

    Continue on Davison Freeway

    1.3 mi · 2 min · Davison Freeway

  17. 17

    Take the exit slight right toward I 75: Flint, Toledo

    2332 ft · 56 sec

  18. 18

    Keep slight left to continue on I 75 North: Flint

    2346 ft · 56 sec

  19. 19

    Merge slight left onto North Walter P. Chrysler Freeway

    4.6 mi · 5 min · North Walter P. Chrysler Freeway

  20. 20

    Take the exit slight right toward I 696: Lansing, Port Huron

    1036 ft · 25 sec

  21. 21

    Keep slight right to continue on I-75 North to I-696 East

    2136 ft · 52 sec · I-75 North to I-696 East

  22. 22

    Continue on Walter P Reuther Freeway

    6.8 mi · 7 min · Walter P Reuther Freeway

  23. 23

    Take the exit slight right toward M 97: Groesbeck Highway

    1244 ft · 30 sec

  24. 24

    Turn straight onto East 11 Mile Road

    2553 ft · 60 sec · East 11 Mile Road

  25. 25

    Turn left onto Groesbeck Highway

    7.4 mi · 12 min · Groesbeck Highway

  26. 26

    Turn left onto Harrington Street

    2930 ft · 1 min · Harrington Street

  27. 27

    At the end of the road, turn left onto Moravian Drive

    756 ft · 17 sec · Moravian Drive

  28. 28

    Turn right onto White Oaks Drive

    1165 ft · 53 sec · White Oaks Drive

  29. 29

    Turn right onto Red Oaks Drive

    88 m · 13 sec · Red Oaks Drive

  30. 30

    Arrive at your destination

    0 m · 1 sec · Red Oaks Drive

Car Route Details

A richer read on the saved driving route between Pulaski and Clinton Township.

OSRM road route
Drive Character

Interchange-aware route

The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.

Directions
30 steps
8 turns on the saved route
Ramps & Exits
6
2 merges, 4 ramps or exits
Navigation Density
26.2 / 100 mi
Decision points by distance
Main Roads
I 94 East
35.2 mi · 31%
M 14 East
26.7 mi · 23%
Spring Arbor Road
8.32 mi · 7%
Groesbeck Highway
7.42 mi · 6%
Walter P Reuther Freeway
6.78 mi · 6%
Jeffries Freeway (Express)
5.32 mi · 5%
Longest Stretch

I 94 East

Merge slight left

34.8 mi · 00h 37m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 00m
Day trip friendly
Same-Day Return
04h 00m
Round-trip wheel time
Road vs Air
+20.5 mi
93.8 mi direct line
Halfway Stop
Northfield
01h 00m from Pulaski
Leave By
2:30 PM EDT
Morning start is best
Weather Watch

Sunny then Slight Chance Showers And Thunderstorms leaving Pulaski and Sunny then Slight Chance Rain Showers near Clinton Township.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Pulaski to Clinton Township?

The road trip is about 114.3 miles (184 km) and usually takes 02h 00m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Northfield is a useful midpoint, sitting about 57 miles from Pulaski and 57.3 miles from Clinton Township.

How much longer is the road route than the straight-line distance?

The direct path is about 93.8 miles (151 km), while the road route adds roughly 20.5 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:30 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $15.20 one way or $30.39 round trip. Estimated CO2 is about 35.8 kg one way.

What should you check before leaving?

Before you leave, expect Sunny then Slight Chance Showers And Thunderstorms around Pulaski and Sunny then Slight Chance Rain Showers near Clinton Township.

Stop Ideas Near Northfield

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Northfield, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Northfield.

RAIL

Ann Arbor station

6 mi away
325 Depot Street
RAIL

Greenfield Village, Michigan

40 mi away
20900 Oakwood Blvd.
RAIL

John D. Dingell Transit Center

43 mi away
16121 Michigan Ave.
RAIL

Pontiac Transportation Center

48 mi away
51000 Woodward Avenue

Flight Path Map

This map shows the direct air route between Pulaski and Clinton Township. Straight-line distance: 93.8 mi (150.96 km).

Photo coming soon

#1 Pulaski

Township in Jackson County, Michigan

Population2,092
Coordinates42.1150400, -84.6424600
Altitude331
CountryUnited States
Clinton Township

#2 Clinton Township

A city in Macomb County, Michigan.

Population99,753
Coordinates42.5869800, -82.9199200
Altitude183
CountryUnited States
Start: Pulaski Road (-84.642342, 42.115042)
End: Red Oaks Drive (-82.919431, 42.586969)

Estimated Travel Time

Distance: 184 km by road

SpeedTime
30 mph (48.3 km/h)03h 48m
40 mph (64.37 km/h)02h 51m
50 mph (80.47 km/h)02h 17m
60 mph (96.56 km/h)01h 54m
70 mph (112.65 km/h)01h 37m
80 mph (129 km/h)01h 25m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
4.03 gal
15.27 L · about $15.20
Round trip
$30.39
8.06 gal · 30.54 L
Estimated CO2
35.8 kg one way
Round trip: 71.6 kg / 158 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $15.20 $30.39
Mid-grade $4.25 $17.14 $34.28
Premium $4.65 $18.76 $37.51
Diesel $5.30 $21.38 $42.75

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Michigan · May 04, 2026

There is no time difference between Pulaski and Clinton Township. The current time is 19:12:26.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.