How far is Portage, IN from Milford, IN?
The driving distance from Portage, IN to Milford, IN is about 78.7 miles (126.6 km), with a travel time of about 01h 57m by car.
- The straight-line flight distance is about 69.8 miles (112.4 km).
- For a round trip, plan for roughly 03h 55m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 57m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Indiana, USA
Route Weather Snapshot
Check the forecast at both ends before you head out.
Partly Sunny
Patchy Fog then Mostly Sunny
Driving Route Map
The map below follows the saved road route between Portage and Milford.
Turn-by-Turn Driving Directions
Step-by-step road directions between Portage and Milford.
-
1
Start on Central Avenue
1 km · 1 min · Central Avenue
-
2
Turn right onto Airport Road
1.7 mi · 4 min · Airport Road
-
3
Turn left
13.3 mi · 20 min
-
4
Enter the roundabout and take exit 2 toward the route
43 m · 3 sec
-
5
Exit the roundabout
1.3 km · 1 min
-
6
Turn right
1.2 mi · 2 min
-
7
Continue straight
158 m · 9 sec
-
8
Turn slight right
57.9 mi · 1 hr 24 min
-
9
Turn right
2.8 mi · 4 min
-
10
Turn left onto West Catherine Street
1294 ft · 59 sec · West Catherine Street
-
11
Arrive at your destination
0 m · 1 sec · East Catherine Street
Car Route Details
A richer read on the saved driving route between Portage and Milford.
Straightforward drive
The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.
Longest stretch
Turn slight right
57.9 mi · 01h 24m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Partly Sunny leaving Portage and Patchy Fog then Mostly Sunny near Milford.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Portage to Milford?
The road trip is about 78.7 miles (126.6 km) and usually takes 01h 57m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Walkerton is a useful midpoint, sitting about 39.3 miles from Portage and 39.5 miles from Milford.
How much longer is the road route than the straight-line distance?
The direct path is about 69.8 miles (112.4 km), while the road route adds roughly 8.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 2:34 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $10.48 one way or $20.97 round trip. Estimated CO2 is about 24.7 kg one way.
Do you cross a time zone on this route?
Yes. There is about a 1 hour time difference between Portage and Milford, so arrival and return times should be read in local time.
What should you check before leaving?
Before you leave, expect Partly Sunny around Portage and Patchy Fog then Mostly Sunny near Milford.
Stop Ideas Near Walkerton
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Walkerton.
South Bend station
New Buffalo, Michigan
New Buffalo
Michigan City
Flight Path Map
This map shows the direct air route between Portage and Milford. Straight-line distance: 69.81 mi (112.35 km).
#1 Portage
The second most populous city in Porter County, Indiana.
| Population | 90,543 |
| Coordinates | 41.5758700, -87.1761500 |
| Altitude | 194 |
| Country | United States |
#2 Milford
Town in Kosciusko County, Indiana, United States
| Population | 1,562 |
| Coordinates | 41.4097700, -85.8455500 |
| Altitude | 255 |
| Country | United States |
End: Milford (-85.84555, 41.40977)
Estimated Travel Time
Distance: 127 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 37m |
| 40 mph (64.37 km/h) | 01h 58m |
| 50 mph (80.47 km/h) | 01h 34m |
| 60 mph (96.56 km/h) | 01h 18m |
| 70 mph (112.65 km/h) | 01h 07m |
| 80 mph (129 km/h) | 00h 58m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $10.48 | $20.97 |
| Mid-grade | $4.25 | $11.82 | $23.65 |
| Premium | $4.65 | $12.94 | $25.88 |
| Diesel | $5.30 | $14.75 | $29.49 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Indiana · Apr 17, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.