How far is Port Townsend, WA from Bellingham, WA?
The driving distance from Port Townsend, WA to Bellingham, WA is about 73.5 miles (118.3 km), with a travel time of about 02h 14m by car.
- The straight-line flight distance is about 46.1 miles (74.2 km).
- For a round trip, plan for roughly 04h 28m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 14m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Washington, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Port Townsend and Bellingham.
Turn-by-Turn Driving Directions
Step-by-step road directions between Port Townsend and Bellingham.
-
1
Start on Tyler Street
730 ft · 20 sec · Tyler Street
-
2
Turn left onto Jefferson Street
846 ft · 23 sec · Jefferson Street
-
3
Continue on Quincy Street
583 ft · 18 sec · Quincy Street
-
4
Turn right onto Water Street
1836 ft · 1 min · Water Street
-
5
Turn left onto Ferry Dock
29 m · 3 sec · Ferry Dock
-
6
Keep slight right to continue on Ferry Dock
147 m · 13 sec · Ferry Dock
-
7
At the end of the road, turn left onto Ferry Dock
17 m · 3 sec · Ferry Dock
-
8
Turn right onto Port Townsend Slip 1
44 m · 3 sec · Port Townsend Slip 1
-
9
Continue on Port Townsend-Coupeville Ferry
5.8 mi · 35 min · Port Townsend-Coupeville Ferry
-
10
Continue on State Route 20
73 m · 9 sec · State Route 20
-
11
At the end of the road, turn left onto Engle Road
1.3 km · 2 min · Engle Road
-
12
Keep slight left to continue on Engle Road
2.6 mi · 5 min · Engle Road
-
13
Continue on South Main Street
3092 ft · 2 min · South Main Street
-
14
Turn left onto State Route 20
9.5 mi · 14 min · State Route 20
-
15
Turn left onto State Route 20
3.1 mi · 6 min · State Route 20
-
16
Enter the roundabout and take exit 2 toward State Route 20
22 m · 2 sec · State Route 20
-
17
Exit the roundabout onto State Route 20
4.7 mi · 7 min · State Route 20
-
18
Enter the roundabout and take exit 2 toward State Route 20
26 m · 1 sec · State Route 20
-
19
Exit the roundabout onto State Route 20
7.9 mi · 14 min · State Route 20
-
20
Enter the roundabout and take exit 2 toward State Route 20
43 m · 3 sec · State Route 20
-
21
Exit the roundabout onto State Route 20
3088 ft · 1 min · State Route 20
-
22
Keep slight left to continue on State Route 20
61 m · 5 sec · State Route 20
-
23
Enter the roundabout and take exit 1 toward Sharpes Corner
5 m · 1 sec · State Route 20
-
24
Exit the rotary onto State Route 20
11.7 mi · 17 min · State Route 20
-
25
Take the exit slight right
2035 ft · 49 sec
-
26
Merge slight left
22.7 mi · 26 min
-
27
Take the exit slight right toward Lakeway Drive
725 ft · 25 sec
-
28
Turn right onto King Street
144 m · 9 sec · King Street
-
29
Turn right onto Lakeway Drive
2003 ft · 1 min · Lakeway Drive
-
30
Continue on East Holly Street
3179 ft · 2 min · East Holly Street
-
31
Turn right onto Bay Street
24 m · 5 sec · Bay Street
-
32
Turn left onto Prospect Street
1333 ft · 41 sec · Prospect Street
-
33
Continue on Dupont Street
2429 ft · 1 min · Dupont Street
-
34
Arrive at your destination
0 m · 1 sec · Dupont Street
Car Route Details
A richer read on the saved driving route between Port Townsend and Bellingham.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
State Route 20
Merge slight left
22.7 mi · 00h 26m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny leaving Port Townsend and Mostly Sunny near Bellingham.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Port Townsend to Bellingham?
The road trip is about 73.5 miles (118.3 km) and usually takes 02h 14m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Anacortes is a useful midpoint, sitting about 36.7 miles from Port Townsend and 36.8 miles from Bellingham.
How much longer is the road route than the straight-line distance?
The direct path is about 46.1 miles (74.2 km), while the road route adds roughly 27.4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 2:02 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $13.55 one way or $27.11 round trip. Estimated CO2 is about 23 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Port Townsend and Mostly Sunny near Bellingham.
Stop Ideas Near Anacortes
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Anacortes.
Skagit Transportation Center
Bellingham station
Stanwood station
Everett Station
Flight Path Map
This map shows the direct air route between Port Townsend and Bellingham. Straight-line distance: 46.11 mi (74.21 km).
#1 Port Townsend
City in and county seat of Jefferson County, Washington
| Population | 9,973 |
| Coordinates | 48.1170400, -122.7604500 |
| Altitude | 40 |
| Country | United States |
#2 Bellingham
The most populous city in Whatcom County, Washington.
| Population | 93,955 |
| Coordinates | 48.7595500, -122.4882200 |
| Altitude | 21 |
| Country | United States |
End: Dupont Street (-122.488104, 48.759626)
Estimated Travel Time
Distance: 118 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 26m |
| 40 mph (64.37 km/h) | 01h 50m |
| 50 mph (80.47 km/h) | 01h 28m |
| 60 mph (96.56 km/h) | 01h 13m |
| 70 mph (112.65 km/h) | 01h 03m |
| 80 mph (129 km/h) | 00h 55m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $5.23 | $13.55 | $27.11 |
| Mid-grade | $5.57 | $14.42 | $28.84 |
| Premium | $5.77 | $14.95 | $29.89 |
| Diesel | $5.47 | $14.16 | $28.32 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Washington · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.