How far is New Milford, OH from Kent, OH?
The driving distance from New Milford, OH to Kent, OH is about 11.7 miles (18.8 km), with a travel time of about 00h 21m by car.
- The straight-line flight distance is about 8.2 miles (13.2 km).
- For a round trip, plan for roughly 00h 43m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EST.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 21m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census-designated place in Portage County, Ohio
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Driving Route Map
The map below follows the saved road route between New Milford and Kent.
Turn-by-Turn Driving Directions
Step-by-step road directions between New Milford and Kent.
-
1
Start on Greenwood Road
28 m · 7 sec · Greenwood Road
-
2
Turn right onto Hattrick Road
2370 ft · 58 sec · Hattrick Road
-
3
At the end of the road, turn right onto Tallmadge Road
1.4 mi · 3 min · Tallmadge Road
-
4
Turn right
1.2 km · 1 min
-
5
Turn left
1835 ft · 47 sec
-
6
Merge slight left
4.9 mi · 5 min
-
7
Take the exit slight right toward SR 43: Hartville, Kent
1553 ft · 41 sec
-
8
Turn right onto State Route 43
1.5 mi · 3 min · State Route 43
-
9
Continue on South Water Street
1791 ft · 47 sec · South Water Street
-
10
Turn left
2234 ft · 49 sec
-
11
Turn right onto Franklin Avenue
1.3 mi · 3 min · Franklin Avenue
-
12
At the end of the road, turn right onto West Main Street
65 m · 6 sec · West Main Street
-
13
Arrive at your destination
0 m · 1 sec · East Main Street
Car Route Details
A richer read on the saved driving route between New Milford and Kent.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Tallmadge Road
Merge slight left
4.88 mi · 00h 05m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Cloudy leaving New Milford and Cloudy near Kent.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from New Milford to Kent?
The road trip is about 11.7 miles (18.8 km) and usually takes 00h 21m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Brimfield is a useful midpoint, sitting about 5.9 miles from New Milford and 5.8 miles from Kent.
How much longer is the road route than the straight-line distance?
The direct path is about 8.2 miles (13.2 km), while the road route adds roughly 3.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EST. If you want a more comfortable same-day return, try to leave by 7:46 PM EST.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.63 one way or $3.26 round trip. Estimated CO2 is about 3.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around New Milford and Cloudy near Kent.
Stop Ideas Near Brimfield
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Brimfield.
Alliance
Cleveland Lakefront station
Elyria
Flight Path Map
This map shows the direct air route between New Milford and Kent. Straight-line distance: 8.19 mi (13.18 km).
#1 New Milford
Situated within Rootstown Township in central Portage County, this unincorporated community lies in the northeastern region of Ohio.
| Population | 0 |
| Coordinates | 41.1047800, -81.2145500 |
| Altitude | 343 |
| Country | United States |
#2 Kent
City in Portage County, Ohio, United States of America
| Population | 29,319 |
| Coordinates | 41.1536700, -81.3578900 |
| Altitude | 325 |
| Country | United States |
End: East Main Street (-81.357891, 41.153771)
Estimated Travel Time
Distance: 19 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 23m |
| 40 mph (64.37 km/h) | 00h 17m |
| 50 mph (80.47 km/h) | 00h 14m |
| 60 mph (96.56 km/h) | 00h 11m |
| 70 mph (112.65 km/h) | 00h 10m |
| 80 mph (129 km/h) | 00h 08m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.98 | $1.63 | $3.26 |
| Mid-grade | $4.56 | $1.87 | $3.74 |
| Premium | $5.10 | $2.09 | $4.18 |
| Diesel | $6.39 | $2.62 | $5.24 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Ohio · Nov 06, 2026