How far is Kent, OH from New Milford, OH?
The driving distance from Kent, OH to New Milford, OH is about 11.9 miles (19.1 km), with a travel time of about 00h 19m by car.
- The straight-line flight distance is about 8.2 miles (13.2 km).
- For a round trip, plan for roughly 00h 39m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EST.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 19m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census-designated place in Portage County, Ohio
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Driving Route Map
The map below follows the saved road route between Kent and New Milford.
Turn-by-Turn Driving Directions
Step-by-step road directions between Kent and New Milford.
-
1
Start on East Main Street
65 m · 9 sec · East Main Street
-
2
Turn left onto Franklin Avenue
1.3 mi · 3 min · Franklin Avenue
-
3
Turn left
2307 ft · 52 sec
-
4
Turn right onto South Water Street
1795 ft · 48 sec · South Water Street
-
5
Continue on State Route 43
1.7 mi · 3 min · State Route 43
-
6
Take the ramp left toward I 76 East: Youngstown
1718 ft · 42 sec
-
7
Merge slight left
5 mi · 5 min
-
8
Take the exit slight right toward SR 44 South
1094 ft · 27 sec
-
9
Turn right
1.1 km · 1 min
-
10
Turn left onto Tallmadge Road
1.4 mi · 3 min · Tallmadge Road
-
11
Turn left onto Hattrick Road
2370 ft · 1 min · Hattrick Road
-
12
Turn left onto Greenwood Road
28 m · 4 sec · Greenwood Road
-
13
Arrive at your destination
0 m · 1 sec · Greenwood Road
Car Route Details
A richer read on the saved driving route between Kent and New Milford.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
I 76 East
Merge slight left
4.99 mi · 00h 05m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Cloudy leaving Kent and Mostly Cloudy near New Milford.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Kent to New Milford?
The road trip is about 11.9 miles (19.1 km) and usually takes 00h 19m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Brimfield is a useful midpoint, sitting about 5.9 miles from Kent and 5.9 miles from New Milford.
How much longer is the road route than the straight-line distance?
The direct path is about 8.2 miles (13.2 km), while the road route adds roughly 3.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EST. If you want a more comfortable same-day return, try to leave by 7:50 PM EST.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.67 one way or $3.34 round trip. Estimated CO2 is about 3.7 kg one way.
What should you check before leaving?
Before you leave, expect Cloudy around Kent and Mostly Cloudy near New Milford.
Stop Ideas Near Brimfield
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Brimfield.
Alliance
Cleveland Lakefront station
Elyria
Flight Path Map
This map shows the direct air route between Kent and New Milford. Straight-line distance: 8.19 mi (13.18 km).
#1 Kent
City in Portage County, Ohio, United States of America
| Population | 29,319 |
| Coordinates | 41.1536700, -81.3578900 |
| Altitude | 325 |
| Country | United States |
#2 New Milford
Situated within Rootstown Township in central Portage County, this unincorporated community lies in the northeastern region of Ohio.
| Population | 0 |
| Coordinates | 41.1047800, -81.2145500 |
| Altitude | 343 |
| Country | United States |
End: New Milford (-81.21455, 41.10478)
Estimated Travel Time
Distance: 19 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 23m |
| 40 mph (64.37 km/h) | 00h 17m |
| 50 mph (80.47 km/h) | 00h 14m |
| 60 mph (96.56 km/h) | 00h 11m |
| 70 mph (112.65 km/h) | 00h 10m |
| 80 mph (129 km/h) | 00h 08m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.98 | $1.67 | $3.34 |
| Mid-grade | $4.56 | $1.92 | $3.83 |
| Premium | $5.10 | $2.14 | $4.29 |
| Diesel | $6.39 | $2.68 | $5.37 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Ohio · Nov 06, 2026