How far is Nappanee, IN from Portage, IN?

The driving distance from Nappanee, IN to Portage, IN is about 67.3 miles (108.3 km), with a travel time of about 01h 21m by car.

  • The straight-line flight distance is about 61.5 miles (98.9 km).
  • For a round trip, plan for roughly 02h 42m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
67.28 mi
01h 21m
Flight
61.47 mi
98.93 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Nappanee.

Flight Distance

Direct air line
61.47 mi
Kilometers
98.93 km
Flight Time
00h 07m

Driving Distance

Road route
67.28 mi
Kilometers
108.27 km
Drive Time
01h 21m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 01h 21m.

Arrival Snapshot
Arrive in Portage
Sat, May 2, 2:19 AM CDT
Return by in Nappanee
Sat, May 2, 4:41 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Nappanee
2026-05-02T01:58
Arrive Portage
Sat, May 2, 3:19 AM EDT
Route Timing
01h 21m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
8:21 AM to 10:21 AM CDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
3:48 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Nappanee
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Kingsford Heights
IN

Town of the United States

From Nappanee
33.6 mi
00h 40m
To Portage
33.7 mi
00h 40m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
53°F
Saturday

Mostly Sunny

Starts
Sat, May 2 6:00 AM EDT
Wind
0 to 15 mph NW
Destination
52°F
Saturday

Areas Of Frost then Sunny

Starts
Sat, May 2 6:00 AM CDT
Wind
5 to 10 mph NNW

Driving Route Map

The map below follows the saved road route between Nappanee and Portage.

Turn-by-Turn Driving Directions

Step-by-step road directions between Nappanee and Portage.

  1. 1

    Start on North Main Street

    20 m · 6 sec · North Main Street

  2. 2

    Turn right onto West Market Street

    2 mi · 4 min · West Market Street

  3. 3

    Continue on Grand Army of the Republic Highway

    22.9 mi · 31 min · Grand Army of the Republic Highway

  4. 4

    Continue on Roosevelt Road

    24.7 mi · 36 min · Roosevelt Road

  5. 5

    Turn slight right

    1.2 mi · 2 min

  6. 6

    Turn left

    1.2 km · 1 min

  7. 7

    Enter the roundabout and take exit 2 toward the route

    45 m · 3 sec

  8. 8

    Exit the roundabout

    13.2 mi · 19 min

  9. 9

    Turn right onto Airport Road

    1.7 mi · 4 min · Airport Road

  10. 10

    Turn left onto Central Avenue

    1 km · 1 min · Central Avenue

  11. 11

    Arrive at your destination

    0 m · 1 sec · Central Avenue

Car Route Details

A richer read on the saved driving route between Nappanee and Portage.

OSRM road route
Drive Character

Straightforward drive

The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.

Directions
11 steps
7 turns on the saved route
Ramps & Exits
2
0 merges, 2 ramps or exits
Navigation Density
16.3 / 100 mi
Decision points by distance
Main Roads
Roosevelt Road
38 mi · 56%
Grand Army of the Republic Highway
22.9 mi · 34%
West Market Street
2.02 mi · 3%
Airport Road
1.75 mi · 3%
Central Avenue
0.64 mi · 1%
North Main Street
0.01 mi
Longest Stretch

Roosevelt Road

Continue on Roosevelt Road

24.7 mi · 00h 36m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
01h 21m
Day trip friendly
Same-Day Return
02h 42m
Round-trip wheel time
Road vs Air
+5.8 mi
61.5 mi direct line
Halfway Stop
Kingsford Heights
00h 40m from Nappanee
Leave By
3:48 PM EDT
Morning start is best
Weather Watch

Mostly Sunny leaving Nappanee and Areas Of Frost then Sunny near Portage.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Nappanee to Portage?

The road trip is about 67.3 miles (108.3 km) and usually takes 01h 21m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Kingsford Heights is a useful midpoint, sitting about 33.6 miles from Nappanee and 33.7 miles from Portage.

How much longer is the road route than the straight-line distance?

The direct path is about 61.5 miles (98.9 km), while the road route adds roughly 5.8 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 3:48 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $8.94 one way or $17.87 round trip. Estimated CO2 is about 21.1 kg one way.

Do you cross a time zone on this route?

Yes. There is about a 1 hour time difference between Nappanee and Portage, so arrival and return times should be read in local time.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Nappanee and Areas Of Frost then Sunny near Portage.

Stop Ideas Near Kingsford Heights

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Kingsford Heights, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Kingsford Heights.

RAIL

Michigan City

32 mi away
100 Washington St.
RAIL

New Buffalo, Michigan

34 mi away
517 South Whittaker Street
RAIL

New Buffalo

35 mi away
226 North Whittaker Street
RAIL

South Bend station

40 mi away
2702 West Washington Avenue

Flight Path Map

This map shows the direct air route between Nappanee and Portage. Straight-line distance: 61.47 mi (98.93 km).

Nappanee

#1 Nappanee

City in Elkhart County, Indiana, United States

Population6,845
Coordinates41.4428300, -86.0013900
Altitude267
CountryUnited States
Portage

#2 Portage

The second most populous city in Porter County, Indiana.

Population90,543
Coordinates41.5758700, -87.1761500
Altitude194
CountryUnited States
Start: North Main Street (-86.001284, 41.442831)
End: Central Avenue (-87.17615, 41.575874)

Estimated Travel Time

Distance: 108 km by road

SpeedTime
30 mph (48.3 km/h)02h 14m
40 mph (64.37 km/h)01h 40m
50 mph (80.47 km/h)01h 20m
60 mph (96.56 km/h)01h 07m
70 mph (112.65 km/h)00h 57m
80 mph (129 km/h)00h 50m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
2.37 gal
8.99 L · about $8.94
Round trip
$17.87
4.74 gal · 17.98 L
Estimated CO2
21.1 kg one way
Round trip: 42.1 kg / 93 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $8.94 $17.87
Mid-grade $4.25 $10.08 $20.16
Premium $4.65 $11.03 $22.06
Diesel $5.30 $12.57 $25.14

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Indiana · May 02, 2026

Please keep in mind that there is a 1 hour time gap between Nappanee, IN and Portage, IN. The current time in Nappanee is 01:58:24, although it is 00:58:24 in Portage.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.