How far is Naperville, IL from Arthur, IL?
The driving distance from Naperville, IL to Arthur, IL is about 184.4 miles (296.8 km), with a travel time of about 03h 37m by car.
- The straight-line flight distance is about 144.1 miles (231.9 km).
- For a round trip, plan for roughly 07h 15m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM CDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 37m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Township in Iroquois County, Illinois
Route Weather Snapshot
Check the forecast at both ends before you head out.
Showers And Thunderstorms Likely
Chance Showers And Thunderstorms
Driving Route Map
The map below follows the saved road route between Naperville and Arthur.
Turn-by-Turn Driving Directions
Step-by-step road directions between Naperville and Arthur.
-
1
Start on North Washington Street
15 m · 9 sec · North Washington Street
-
2
Turn left onto East Ogden Avenue
5 mi · 10 min · East Ogden Avenue
-
3
Take the ramp right toward I 355 Toll South: Joliet
1189 ft · 29 sec
-
4
Merge slight left onto Veterans Memorial Tollway
19.2 mi · 22 min · Veterans Memorial Tollway
-
5
Keep slight left to continue on I 80 East: Indiana
1.3 mi · 3 min
-
6
Merge slight left
10.6 mi · 12 min
-
7
Take the exit slight right toward I 57 South: Memphis
3222 ft · 1 min
-
8
Merge slight left
124.3 mi · 2 hr 14 min
-
9
Take the exit slight right toward US 45: Tolono, Pesotum, Tuscola
1328 ft · 28 sec
-
10
Turn straight
8 mi · 12 min
-
11
Turn right
825 ft · 30 sec
-
12
Turn straight onto County Road 950 North
8.9 mi · 13 min · County Road 950 North
-
13
Continue on United States Route 36
3077 ft · 57 sec · United States Route 36
-
14
Turn left onto North County Road 000 East
4.6 mi · 6 min · North County Road 000 East
-
15
Continue on North Vine Street
1.1 km · 2 min · North Vine Street
-
16
Arrive at your destination
0 m · 1 sec · South Vine Street
Car Route Details
A richer read on the saved driving route between Naperville and Arthur.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 57 South
Merge slight left
124 mi · 02h 14m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Showers And Thunderstorms Likely leaving Naperville and Chance Showers And Thunderstorms near Arthur.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Naperville to Arthur?
The road trip is about 184.4 miles (296.8 km) and usually takes 03h 37m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Danforth is a useful midpoint, sitting about 92.3 miles from Naperville and 92.2 miles from Arthur.
How much longer is the road route than the straight-line distance?
The direct path is about 144.1 miles (231.9 km), while the road route adds roughly 40.3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM CDT. If you want a more comfortable same-day return, try to leave by 9:44 AM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $24.55 one way or $49.10 round trip. Estimated CO2 is about 57.9 kg one way.
What should you check before leaving?
Before you leave, expect Showers And Thunderstorms Likely around Naperville and Chance Showers And Thunderstorms near Arthur.
Stop Ideas Near Danforth
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Danforth.
Gilman
Kankakee
Dwight station
Pontiac station
Flight Path Map
This map shows the direct air route between Naperville and Arthur. Straight-line distance: 144.11 mi (231.92 km).
#1 Naperville
The second most populous city in Illinois.
| Population | 147,986 |
| Coordinates | 41.7858600, -88.1472900 |
| Altitude | 216 |
| Country | United States |
#2 Arthur
Village in Illinois, United States
| Population | 2,192 |
| Coordinates | 39.7147600, -88.4722800 |
| Altitude | 202 |
| Country | United States |
End: Arthur (-88.47228, 39.71476)
Estimated Travel Time
Distance: 297 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 06h 08m |
| 40 mph (64.37 km/h) | 04h 36m |
| 50 mph (80.47 km/h) | 03h 41m |
| 60 mph (96.56 km/h) | 03h 04m |
| 70 mph (112.65 km/h) | 02h 38m |
| 80 mph (129 km/h) | 02h 18m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $24.55 | $49.10 |
| Mid-grade | $4.25 | $27.69 | $55.37 |
| Premium | $4.65 | $30.30 | $60.60 |
| Diesel | $5.30 | $34.53 | $69.06 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Illinois · Apr 15, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.