How far is Milford Mill, MD from Hanover, MD?
The driving distance from Milford Mill, MD to Hanover, MD is about 14.4 miles (23.2 km), with a travel time of about 00h 27m by car.
- The straight-line flight distance is about 11 miles (17.7 km).
- For a round trip, plan for roughly 00h 55m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 27m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
A city in Baltimore County, Maryland.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers
Rain Showers
Driving Route Map
The map below follows the saved road route between Milford Mill and Hanover.
Turn-by-Turn Driving Directions
Step-by-step road directions between Milford Mill and Hanover.
-
1
Start on Big Buck Drive
2007 ft · 2 min · Big Buck Drive
-
2
Turn left onto Mayfield Avenue
874 ft · 42 sec · Mayfield Avenue
-
3
At the end of the road, turn left onto Windsor Mill Road
1.2 km · 1 min · Windsor Mill Road
-
4
Turn slight right onto North Rolling Road
2 mi · 5 min · North Rolling Road
-
5
Turn left onto Security Boulevard
1987 ft · 56 sec · Security Boulevard
-
6
Take the ramp slight right toward I 695 South: Glen Burnie
3030 ft · 1 min
-
7
Merge slight left onto Baltimore Beltway
4.7 mi · 6 min · Baltimore Beltway
-
8
Take the exit slight right toward US 1: Arbutus
1017 ft · 25 sec
-
9
Keep slight left to continue on US 1: Southwestern Boulevard
1050 ft · 26 sec
-
10
Turn straight onto Southwestern Boulevard
1.7 mi · 3 min · Southwestern Boulevard
-
11
Turn straight onto Washington Boulevard
1956 ft · 35 sec · Washington Boulevard
-
12
Continue on Washington Boulevard
1.6 mi · 3 min · Washington Boulevard
-
13
Turn left onto Bonnie View Lane
1157 ft · 42 sec · Bonnie View Lane
-
14
At the end of the road, turn right onto Old Washington Road
584 ft · 22 sec · Old Washington Road
-
15
Turn left onto Hanover Road
1 mi · 3 min · Hanover Road
-
16
Turn left
21 m · 5 sec
-
17
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Milford Mill and Hanover.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Baltimore Beltway
Merge slight left onto Baltimore Beltway
4.67 mi · 00h 06m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Rain Showers leaving Milford Mill and Rain Showers near Hanover.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Milford Mill to Hanover?
The road trip is about 14.4 miles (23.2 km) and usually takes 00h 27m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Catonsville is a useful midpoint, sitting about 7.2 miles from Milford Mill and 7.2 miles from Hanover.
How much longer is the road route than the straight-line distance?
The direct path is about 11 miles (17.7 km), while the road route adds roughly 3.4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:34 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $2.08 one way or $4.17 round trip. Estimated CO2 is about 4.5 kg one way.
What should you check before leaving?
Before you leave, expect Rain Showers around Milford Mill and Rain Showers near Hanover.
Stop Ideas Near Catonsville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Catonsville.
BWI Rail Station
Pennsylvania Station
New Carrollton station
Rockville station
Flight Path Map
This map shows the direct air route between Milford Mill and Hanover. Straight-line distance: 10.99 mi (17.68 km).
#1 Milford Mill
Census designated place
| Population | 29,042 |
| Coordinates | 39.3478800, -76.7699700 |
| Altitude | 151 |
| Country | United States |
#2 Hanover
Hanover is a place in Maryland, United States.
| Population | 0 |
| Coordinates | 39.1928900, -76.7241400 |
| Altitude | 32 |
| Country | United States |
End: (-76.724133, 39.192774)
Estimated Travel Time
Distance: 23 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 28m |
| 40 mph (64.37 km/h) | 00h 21m |
| 50 mph (80.47 km/h) | 00h 17m |
| 60 mph (96.56 km/h) | 00h 14m |
| 70 mph (112.65 km/h) | 00h 12m |
| 80 mph (129 km/h) | 00h 10m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $2.08 | $4.17 |
| Mid-grade | $4.60 | $2.35 | $4.69 |
| Premium | $4.95 | $2.53 | $5.05 |
| Diesel | $5.98 | $3.05 | $6.10 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.