How far is Kent, WA from Dayton, WA?

The driving distance from Kent, WA to Dayton, WA is about 268.2 miles (431.7 km), with a travel time of about 05h 48m by car.

  • The straight-line flight distance is about 214.2 miles (344.7 km).
  • For a round trip, plan for roughly 11h 37m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM PDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
268.26 mi
05h 48m
Flight
214.21 mi
344.73 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Kent.

Flight Distance

Direct air line
214.21 mi
Kilometers
344.73 km
Flight Time
00h 25m

Driving Distance

Road route
268.26 mi
Kilometers
431.72 km
Drive Time
05h 48m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 05h 48m.

Arrival Snapshot
Arrive in Dayton
Thu, Oct 15, 7:11 PM PDT
Return by in Kent
Fri, Oct 16, 1:00 AM PDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Kent
2026-10-15T13:22
Arrive Dayton
Thu, Oct 15, 7:11 PM PDT
Route Timing
05h 48m
One way by road
Best Departure Window
6:00 AM to 8:00 AM PDT
Leave early for more breathing room
Arrive between
11:49 AM to 1:49 PM PDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
5:22 AM PDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Kent
9:00 PM PDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
George
WA

City in Washington, USA

From Kent
133.5 mi
02h 54m
To Dayton
134.8 mi
02h 54m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
73°F
This Afternoon

Sunny

Starts
Thu, Oct 15 12:00 PM PDT
Wind
5 mph NW
Destination
71°F
Thursday

Sunny

Starts
Thu, Oct 15 6:00 AM PDT
Wind
2 mph N

Driving Route Map

The map below follows the saved road route between Kent and Dayton.

Turn-by-Turn Driving Directions

Step-by-step road directions between Kent and Dayton.

  1. 1

    Start on 2nd Avenue South

    3 m · 8 sec · 2nd Avenue South

  2. 2

    Turn left onto West Gowe Street

    1650 ft · 52 sec · West Gowe Street

  3. 3

    Continue on East Titus Street

    1075 ft · 36 sec · East Titus Street

  4. 4

    Turn right onto East Smith Street

    602 ft · 20 sec · East Smith Street

  5. 5

    Continue on Canyon Drive

    1.5 km · 2 min · Canyon Drive

  6. 6

    Continue on Southeast 256th Street

    1998 ft · 50 sec · Southeast 256th Street

  7. 7

    Keep slight right to continue on Southeast Kent Kangley Road

    1.9 mi · 3 min · Southeast Kent Kangley Road

  8. 8

    Continue on Southeast Kent-Kangley Road

    624 ft · 14 sec · Southeast Kent-Kangley Road

  9. 9

    Continue on Southeast 272nd Street

    2.1 mi · 4 min · Southeast 272nd Street

  10. 10

    Turn left onto WA 18 East: North Bend

    2183 ft · 55 sec

  11. 11

    Merge slight left onto State Route 18

    15.7 mi · 20 min · State Route 18

  12. 12

    Continue on Snoqualmie Parkway

    656 ft · 8 sec · Snoqualmie Parkway

  13. 13

    Take the exit slight right toward I 90 East: Spokane

    3019 ft · 1 min

  14. 14

    Merge slight left

    111.9 mi · 2 hr 2 min

  15. 15

    Take the exit slight right toward WA 26 East: Othello, Pullman

    1454 ft · 36 sec

  16. 16

    Turn straight

    82.8 mi · 1 hr 49 min

  17. 17

    Turn right onto North Main Street

    6.4 mi · 11 min · North Main Street

  18. 18

    Turn left

    29.3 mi · 51 min

  19. 19

    At the end of the road, turn right

    14.6 mi · 19 min

  20. 20

    Turn left onto Patit Road

    26 m · 4 sec · Patit Road

  21. 21

    Arrive at your destination

    0 m · 1 sec · Patit Road

Car Route Details

A richer read on the saved driving route between Kent and Dayton.

OSRM road route
Drive Character

Straightforward drive

The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.

Directions
21 steps
8 turns on the saved route
Ramps & Exits
4
2 merges, 2 ramps or exits
Navigation Density
7.8 / 100 mi
Decision points by distance
Main Roads
I 90 East
112 mi · 42%
State Route 18
15.7 mi · 6%
North Main Street
6.44 mi · 2%
Southeast 272nd Street
2.14 mi · 1%
Southeast Kent Kangley Road
1.89 mi · 1%
Canyon Drive
0.95 mi
Longest Stretch

I 90 East

Merge slight left

112 mi · 02h 02m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
05h 48m
Long day trip
Same-Day Return
11h 38m
Round-trip wheel time
Road vs Air
+54 mi
214.2 mi direct line
Halfway Stop
George
02h 54m from Kent
Leave By
5:22 AM PDT
Early departure recommended
Weather Watch

Sunny leaving Kent and Sunny near Dayton.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Kent to Dayton?

The road trip is about 268.2 miles (431.7 km) and usually takes 05h 48m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

George is a useful midpoint, sitting about 133.5 miles from Kent and 134.8 miles from Dayton.

How much longer is the road route than the straight-line distance?

The direct path is about 214.2 miles (344.7 km), while the road route adds roughly 54 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM PDT. If you want a more comfortable same-day return, try to leave by 5:22 AM PDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $51.47 one way or $102.94 round trip. Estimated CO2 is about 84.2 kg one way.

What should you check before leaving?

Before you leave, expect Sunny around Kent and Sunny near Dayton.

Stop Ideas Near George

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around George, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to George.

BUS

Quincy, Washington

18 mi away
102 B St NE
BUS

Ephrata, WA

34 mi away
1352 Basin Street SW
RAIL

Ephrata

36 mi away
24 Alder St NW
BUS

Moses Lake, Washington

46 mi away
1819 East Kittleson Road

Flight Path Map

This map shows the direct air route between Kent and Dayton. Straight-line distance: 214.21 mi (344.73 km).

Kent

#1 Kent

The fourth most populous city in King County, Washington.

Population130,676
Coordinates47.3809300, -122.2348400
Altitude13
CountryUnited States
Photo coming soon

#2 Dayton

Situated in southeastern Washington at an elevation of 1660 feet, this Columbia County seat lies in the foothills of the Blue Mountains along the Touchet River.

Population0
Coordinates46.3237500, -117.9724400
Altitude506
CountryUnited States
Start: Kent (-122.23484, 47.38093)
End: Dayton (-117.97244, 46.32375)

Estimated Travel Time

Distance: 432 km by road

SpeedTime
30 mph (48.3 km/h)08h 56m
40 mph (64.37 km/h)06h 42m
50 mph (80.47 km/h)05h 21m
60 mph (96.56 km/h)04h 28m
70 mph (112.65 km/h)03h 49m
80 mph (129 km/h)03h 20m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
9.47 gal
35.83 L · about $51.47
Round trip
$102.94
18.94 gal · 71.66 L
Estimated CO2
84.2 kg one way
Round trip: 168.3 kg / 371 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $5.44 $51.47 $102.94
Mid-grade $5.72 $54.16 $108.32
Premium $5.98 $56.60 $113.20
Diesel $7.29 $69.06 $138.11

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Washington · Oct 15, 2026

There is no time difference between Kent and Dayton. The current time is 13:22:17.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.