How far is Kent, WA from Dayton, WA?

The driving distance from Kent, WA to Dayton, WA is about 142 miles (228.5 km), with a travel time of about 02h 52m by car.

  • The straight-line flight distance is about 101.1 miles (162.7 km).
  • For a round trip, plan for roughly 05h 45m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
141.98 mi
02h 52m
Flight
101.1 mi
162.71 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Kent.

Flight Distance

Direct air line
101.1 mi
Kilometers
162.71 km
Flight Time
00h 12m

Driving Distance

Road route
141.98 mi
Kilometers
228.5 km
Drive Time
02h 52m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 52m.

Arrival Snapshot
Arrive in Dayton
Sun, Apr 19, 2:33 AM PDT
Return by in Kent
Sun, Apr 19, 5:26 AM PDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Kent
2026-04-18T23:40
Arrive Dayton
Sun, Apr 19, 2:33 AM PDT
Route Timing
02h 52m
One way by road
Best Departure Window
8:00 AM to 10:00 AM PDT
Aim for a morning departure
Arrive between
10:53 AM to 12:53 PM PDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
12:44 PM PDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Kent
9:30 PM PDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Chehalis
WA

City in and county seat of Lewis County, Washington, United States

From Kent
71 mi
01h 26m
To Dayton
71 mi
01h 26m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
66°F
Saturday

Mostly Cloudy then Chance Light Rain

Starts
Sat, Apr 18 6:00 AM PDT
Wind
3 mph N
Destination
63°F
Saturday

Light Rain Likely

Starts
Sat, Apr 18 6:00 AM PDT
Wind
2 to 6 mph ESE

Driving Route Map

The map below follows the saved road route between Kent and Dayton.

Turn-by-Turn Driving Directions

Step-by-step road directions between Kent and Dayton.

  1. 1

    Start on 2nd Avenue South

    3 m · 4 sec · 2nd Avenue South

  2. 2

    Turn right onto West Gowe Street

    643 ft · 25 sec · West Gowe Street

  3. 3

    Turn left onto 4th Avenue South

    829 ft · 24 sec · 4th Avenue South

  4. 4

    Turn slight right

    56 m · 7 sec

  5. 5

    Turn straight onto West Willis Street

    1972 ft · 53 sec · West Willis Street

  6. 6

    Turn left onto WA 167 South: Auburn

    1623 ft · 44 sec

  7. 7

    Merge slight left onto Valley Freeway

    4.4 mi · 6 min · Valley Freeway

  8. 8

    Take the exit slight right toward WA 18 West: Federal Way

    1.6 km · 2 min

  9. 9

    Merge slight left onto State Route 18

    1.5 mi · 2 min · State Route 18

  10. 10

    Take the exit slight right toward I 5: Seattle, Tacoma

    2980 ft · 1 min

  11. 11

    Keep slight left to continue on I 5 South, WA 161: Enchanted Parkway South, Tacoma

    3094 ft · 1 min

  12. 12

    Keep slight left to continue on I 5 South: Tacoma

    1297 ft · 32 sec

  13. 13

    Merge slight left

    7.2 mi · 9 min

  14. 14

    Keep slight right

    112.2 mi · 2 hr 7 min

  15. 15

    Take the exit slight right toward WA 503 East: Woodland, Cougar

    1088 ft · 27 sec

  16. 16

    Continue on Pacific Avenue

    1.1 km · 2 min · Pacific Avenue

  17. 17

    Continue on Pacific Avenue

    53 m · 14 sec · Pacific Avenue

  18. 18

    Turn left onto Lewis River Road

    635 ft · 24 sec · Lewis River Road

  19. 19

    Turn right onto East CC Street

    1360 ft · 37 sec · East CC Street

  20. 20

    Turn straight onto Northwest Hayes Road

    4 mi · 6 min · Northwest Hayes Road

  21. 21

    Continue on Northeast Hayes Road

    1.3 mi · 2 min · Northeast Hayes Road

  22. 22

    Continue on Northeast Cedar Creek Road

    6.6 mi · 10 min · Northeast Cedar Creek Road

  23. 23

    Arrive at your destination

    0 m · 1 sec · Northeast Cedar Creek Road

Car Route Details

A richer read on the saved driving route between Kent and Dayton.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
23 steps
8 turns on the saved route
Ramps & Exits
6
3 merges, 3 ramps or exits
Navigation Density
16.2 / 100 mi
Decision points by distance
Main Roads
I 5 South
120 mi · 85%
Northeast Cedar Creek Road
6.57 mi · 5%
Valley Freeway
4.44 mi · 3%
Northwest Hayes Road
4.02 mi · 3%
State Route 18
1.53 mi · 1%
Northeast Hayes Road
1.3 mi · 1%
Longest Stretch

I 5 South

Keep slight right

112 mi · 02h 07m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 52m
Day trip friendly
Same-Day Return
05h 46m
Round-trip wheel time
Road vs Air
+40.9 mi
101.1 mi direct line
Halfway Stop
Chehalis
01h 26m from Kent
Leave By
12:44 PM PDT
Morning start is best
Weather Watch

Mostly Cloudy then Chance Light Rain leaving Kent and Light Rain Likely near Dayton.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Kent to Dayton?

The road trip is about 142 miles (228.5 km) and usually takes 02h 52m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Chehalis is a useful midpoint, sitting about 71 miles from Kent and 71 miles from Dayton.

How much longer is the road route than the straight-line distance?

The direct path is about 101.1 miles (162.7 km), while the road route adds roughly 40.9 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 12:44 PM PDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $26.22 one way or $52.43 round trip. Estimated CO2 is about 44.5 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Cloudy then Chance Light Rain around Kent and Light Rain Likely near Dayton.

Stop Ideas Near Chehalis

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Chehalis, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Chehalis.

RAIL

Centralia station

6 mi away
210 Railroad Avenue
RAIL

Centennial Station

39 mi away
6600 Yelm Highway S.E.
RAIL

Kelso Multimodal Transportation Center

58 mi away
501 South First Street
RAIL

Tacoma Dome Station

77 mi away
1001 Puyallup Avenue

Flight Path Map

This map shows the direct air route between Kent and Dayton. Straight-line distance: 101.1 mi (162.71 km).

Kent

#1 Kent

The fourth most populous city in King County, Washington.

Population130,676
Coordinates47.3809300, -122.2348400
Altitude13
CountryUnited States
Dayton

#2 Dayton

Town in Washington

Population2,477
Coordinates45.9315000, -122.5273200
Altitude93
CountryUnited States
Start: Kent (-122.23484, 47.38093)
End: Dayton (-122.52732, 45.9315)

Estimated Travel Time

Distance: 229 km by road

SpeedTime
30 mph (48.3 km/h)04h 43m
40 mph (64.37 km/h)03h 32m
50 mph (80.47 km/h)02h 50m
60 mph (96.56 km/h)02h 21m
70 mph (112.65 km/h)02h 01m
80 mph (129 km/h)01h 46m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.01 gal
18.97 L · about $26.22
Round trip
$52.43
10.02 gal · 37.94 L
Estimated CO2
44.5 kg one way
Round trip: 89 kg / 196 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $5.23 $26.22 $52.43
Mid-grade $5.57 $27.89 $55.78
Premium $5.77 $28.91 $57.83
Diesel $5.47 $27.39 $54.78

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Washington · Apr 19, 2026

There is no time difference between Kent and Dayton. The current time is 23:40:49.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.