How far is Kemp Mill, MD from New Mexico, MD?

The driving distance from Kemp Mill, MD to New Mexico, MD is about 46.5 miles (74.9 km), with a travel time of about 01h 14m by car.

  • The straight-line flight distance is about 39.2 miles (63.1 km).
  • For a round trip, plan for roughly 02h 29m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
46.54 mi
01h 14m
Flight
39.18 mi
63.05 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Kemp Mill.

Flight Distance

Direct air line
39.18 mi
Kilometers
63.05 km
Flight Time
00h 04m

Driving Distance

Road route
46.54 mi
Kilometers
74.9 km
Drive Time
01h 14m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 01h 14m.

Arrival Snapshot
Arrive in New Mexico
Thu, Oct 15, 11:54 PM EDT
Return by in Kemp Mill
Fri, Oct 16, 1:09 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Kemp Mill
2026-10-15T22:39
Arrive New Mexico
Thu, Oct 15, 11:54 PM EDT
Route Timing
01h 14m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
9:15 AM to 11:15 AM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
4:00 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Kemp Mill
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Sykesville
MD

Town in Carroll County, Maryland, United States

From Kemp Mill
22.6 mi
00h 37m
To New Mexico
23.9 mi
00h 37m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
65°F
This Afternoon

Chance Rain Showers

Starts
Thu, Oct 15 12:00 PM EDT
Wind
6 mph E
Destination
64°F
This Afternoon

Chance Rain Showers

Starts
Thu, Oct 15 1:00 PM EDT
Wind
5 mph SE

Driving Route Map

The map below follows the saved road route between Kemp Mill and New Mexico.

Turn-by-Turn Driving Directions

Step-by-step road directions between Kemp Mill and New Mexico.

  1. 1

    Start on Northwood Terrace

    1498 ft · 1 min · Northwood Terrace

  2. 2

    Continue on Conti Place

    664 ft · 34 sec · Conti Place

  3. 3

    At the end of the road, turn left onto Hoyt Street

    113 m · 19 sec · Hoyt Street

  4. 4

    Turn right onto Arcola Avenue

    1.7 mi · 5 min · Arcola Avenue

  5. 5

    Turn right onto Georgia Avenue

    1.5 km · 2 min · Georgia Avenue

  6. 6

    Turn right onto Layhill Road

    2313 ft · 1 min · Layhill Road

  7. 7

    Keep slight left to continue on Layhill Road

    2.5 mi · 5 min · Layhill Road

  8. 8

    Turn left onto MD 200 Toll West

    1490 ft · 38 sec

  9. 9

    Merge slight left onto Intercounty Connector

    1.4 mi · 2 min · Intercounty Connector

  10. 10

    Take the exit slight right toward MD 97: Georgia Avenue, Olney, Wheaton

    1708 ft · 42 sec

  11. 11

    Keep slight right to continue on MD 97 North: Georgia Avenue North, Olney

    1581 ft · 39 sec

  12. 12

    Turn straight onto Georgia Avenue

    3.9 mi · 8 min · Georgia Avenue

  13. 13

    Enter the roundabout and take exit 2 toward Georgia Avenue

    44 m · 3 sec · Georgia Avenue

  14. 14

    Exit the roundabout onto Georgia Avenue

    2561 ft · 55 sec · Georgia Avenue

  15. 15

    Enter the roundabout and take exit 2 toward Georgia Avenue

    26 m · 2 sec · Georgia Avenue

  16. 16

    Exit the roundabout onto Georgia Avenue

    4.1 mi · 8 min · Georgia Avenue

  17. 17

    Continue on Route 97

    8.7 mi · 14 min · Route 97

  18. 18

    Continue on Old Washington Road

    5.5 mi · 10 min · Old Washington Road

  19. 19

    Enter the roundabout and take exit 2 toward Washington Road

    40 m · 2 sec · Washington Road

  20. 20

    Exit the roundabout onto Washington Road

    1322 ft · 23 sec · Washington Road

  21. 21

    Continue on New Washington Road

    9.5 mi · 13 min · New Washington Road

  22. 22

    Continue on Malcolm Drive

    1892 ft · 36 sec · Malcolm Drive

  23. 23

    Turn left onto Baltimore Boulevard

    1.2 mi · 2 min · Baltimore Boulevard

  24. 24

    Take the exit slight right

    1143 ft · 32 sec

  25. 25

    Keep slight right

    130 m · 12 sec

  26. 26

    Turn straight onto Manchester Road

    2.4 mi · 4 min · Manchester Road

  27. 27

    Turn left onto Guadelupe Drive

    1057 ft · 47 sec · Guadelupe Drive

  28. 28

    Arrive at your destination

    0 m · 1 sec · Guadelupe Drive

Car Route Details

A richer read on the saved driving route between Kemp Mill and New Mexico.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
28 steps
15 turns on the saved route
Ramps & Exits
9
1 merges, 8 ramps or exits
Navigation Density
60.2 / 100 mi
Decision points by distance
Main Roads
New Washington Road
9.46 mi · 20%
Georgia Avenue
9.38 mi · 20%
Route 97
8.75 mi · 19%
Old Washington Road
5.48 mi · 12%
Layhill Road
2.91 mi · 6%
Manchester Road
2.41 mi · 5%
Longest Stretch

New Washington Road

Continue on New Washington Road

9.46 mi · 00h 13m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
01h 14m
Day trip friendly
Same-Day Return
02h 30m
Round-trip wheel time
Road vs Air
+7.3 mi
39.2 mi direct line
Halfway Stop
Sykesville
00h 37m from Kemp Mill
Leave By
4:00 PM EDT
Morning start is best
Weather Watch

Chance Rain Showers leaving Kemp Mill and Chance Rain Showers near New Mexico.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Kemp Mill to New Mexico?

The road trip is about 46.5 miles (74.9 km) and usually takes 01h 14m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Sykesville is a useful midpoint, sitting about 22.6 miles from Kemp Mill and 23.9 miles from New Mexico.

How much longer is the road route than the straight-line distance?

The direct path is about 39.2 miles (63.1 km), while the road route adds roughly 7.3 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:00 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $6.95 one way or $13.91 round trip. Estimated CO2 is about 14.6 kg one way.

What should you check before leaving?

Before you leave, expect Chance Rain Showers around Kemp Mill and Chance Rain Showers near New Mexico.

Stop Ideas Near Sykesville

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Sykesville, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Sykesville.

RAIL

Pennsylvania Station

31 mi away
1515 North Charles Street
RAIL

BWI Rail Station

31 mi away
7 Amtrak Way
BUS

Frederick Airport, MD

36 mi away
1341 Hughes Ford Road
RAIL

Rockville station

36 mi away
251 Hungerford Drive at Park Rd.

Flight Path Map

This map shows the direct air route between Kemp Mill and New Mexico. Straight-line distance: 39.18 mi (63.05 km).

Kemp Mill

#1 Kemp Mill

Census-designated place in Montgomery County, Maryland, United States

Population13,445
Coordinates39.0390000, -77.0191400
Altitude103
CountryUnited States
Photo coming soon

#2 New Mexico

New Mexico is a place in Maryland, United States.

Population0
Coordinates39.6034400, -76.9488700
Altitude268
CountryUnited States
Start: Northwood Terrace (-77.019102, 39.038948)
End: Guadelupe Drive (-76.949006, 39.60335)

Estimated Travel Time

Distance: 75 km by road

SpeedTime
30 mph (48.3 km/h)01h 33m
40 mph (64.37 km/h)01h 09m
50 mph (80.47 km/h)00h 55m
60 mph (96.56 km/h)00h 46m
70 mph (112.65 km/h)00h 39m
80 mph (129 km/h)00h 34m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
1.64 gal
6.22 L · about $6.95
Round trip
$13.91
3.28 gal · 12.44 L
Estimated CO2
14.6 kg one way
Round trip: 29.1 kg / 64 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $4.24 $6.95 $13.91
Mid-grade $4.84 $7.94 $15.88
Premium $5.15 $8.44 $16.88
Diesel $6.36 $10.43 $20.87

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Maryland · Oct 15, 2026

There is no time difference between Kemp Mill and New Mexico. The current time is 22:39:32.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.