How far is Hill City, SD from Mitchell, SD?
The driving distance from Hill City, SD to Mitchell, SD is about 303.4 miles (488.3 km), with a travel time of about 04h 31m by car.
- The straight-line flight distance is about 276.8 miles (445.5 km).
- For a round trip, plan for roughly 09h 03m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM MDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 04h 31m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Township in Jones County, South Dakota
Route Weather Snapshot
Check the forecast at both ends before you head out.
Sunny
Driving Route Map
The map below follows the saved road route between Hill City and Mitchell.
Turn-by-Turn Driving Directions
Step-by-step road directions between Hill City and Mitchell.
-
1
Start on Elm Street
19 m · 6 sec · Elm Street
-
2
Turn right onto Main Street
1.1 km · 2 min · Main Street
-
3
Continue on Highway 385
3 mi · 5 min · Highway 385
-
4
Continue on South Highway 16
17.7 mi · 22 min · South Highway 16
-
5
Continue on Mount Rushmore Road
1 mi · 1 min · Mount Rushmore Road
-
6
Take the exit slight right
577 ft · 11 sec
-
7
Merge slight left onto Catron Boulevard
3.3 mi · 5 min · Catron Boulevard
-
8
Continue on Elk Vale Road
5.3 mi · 7 min · Elk Vale Road
-
9
Take the exit slight right
2710 ft · 1 min
-
10
Merge slight left
268 mi · 4 hr 12 min
-
11
Take the exit slight right
1927 ft · 53 sec
-
12
Turn left onto South Ohlman Street
1.3 km · 1 min · South Ohlman Street
-
13
Take the exit slight right
92 m · 8 sec
-
14
Turn straight onto West Havens Avenue
1.3 km · 2 min · West Havens Avenue
-
15
Turn left onto South Sanborn Boulevard
2659 ft · 1 min · South Sanborn Boulevard
-
16
Turn left onto West 1st Avenue
10 m · 1 sec · West 1st Avenue
-
17
Arrive at your destination
0 m · 1 sec · West 1st Avenue
Car Route Details
A richer read on the saved driving route between Hill City and Mitchell.
Long-distance drive
This route is long enough that fuel, rest stops, weather, and timing matter more than any single maneuver.
Elk Vale Road
Merge slight left
268 mi · 04h 12m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Sunny leaving Hill City and Sunny near Mitchell.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Hill City to Mitchell?
The road trip is about 303.4 miles (488.3 km) and usually takes 04h 31m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Okaton is a useful midpoint, sitting about 150.8 miles from Hill City and 152.6 miles from Mitchell.
How much longer is the road route than the straight-line distance?
The direct path is about 276.8 miles (445.5 km), while the road route adds roughly 26.6 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM MDT. If you want a more comfortable same-day return, try to leave by 7:56 AM MDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $40.39 one way or $80.77 round trip. Estimated CO2 is about 95.2 kg one way.
Do you cross a time zone on this route?
Yes. There is about a 1 hour time difference between Hill City and Mitchell, so arrival and return times should be read in local time.
What should you check before leaving?
Before you leave, expect Sunny around Hill City and Sunny near Mitchell.
Flight Path Map
This map shows the direct air route between Hill City and Mitchell. Straight-line distance: 276.82 mi (445.5 km).
#1 Hill City
City in South Dakota, United States of America
| Population | 1,032 |
| Coordinates | 43.9324900, -103.5751900 |
| Altitude | 1519 |
| Country | United States |
#2 Mitchell
City in and county seat of Davison County, South Dakota, United States
| Population | 15,697 |
| Coordinates | 43.7094300, -98.0298000 |
| Altitude | 400 |
| Country | United States |
End: West 1st Avenue (-98.0298, 43.709412)
Estimated Travel Time
Distance: 488 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 10h 06m |
| 40 mph (64.37 km/h) | 07h 35m |
| 50 mph (80.47 km/h) | 06h 04m |
| 60 mph (96.56 km/h) | 05h 03m |
| 70 mph (112.65 km/h) | 04h 20m |
| 80 mph (129 km/h) | 03h 47m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $40.39 | $80.77 |
| Mid-grade | $4.25 | $45.55 | $91.10 |
| Premium | $4.65 | $49.84 | $99.69 |
| Diesel | $5.30 | $56.81 | $113.61 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in South Dakota · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.