How far is Hahns Mill, MD from Taneytown, MD?
The driving distance from Hahns Mill, MD to Taneytown, MD is about 7.3 miles (11.7 km), with a travel time of about 00h 11m by car.
- The straight-line flight distance is about 4.7 miles (7.6 km).
- For a round trip, plan for roughly 00h 23m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 11m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town of the United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Rain Showers then Chance Showers And Thunderstorms
Chance Rain Showers then Chance Showers And Thunderstorms
Driving Route Map
The map below follows the saved road route between Hahns Mill and Taneytown.
Turn-by-Turn Driving Directions
Step-by-step road directions between Hahns Mill and Taneytown.
-
1
Start on Babylon Road
713 ft · 36 sec · Babylon Road
-
2
Continue on Kump Station Road
1.1 mi · 4 min · Kump Station Road
-
3
At the end of the road, turn right onto Kump Station Road
826 ft · 29 sec · Kump Station Road
-
4
Continue on Kump Station
1.3 mi · 3 min · Kump Station
-
5
Turn left onto Bert Koontz Road
1747 ft · 1 min · Bert Koontz Road
-
6
Turn right onto Brown Road
1.2 mi · 2 min · Brown Road
-
7
At the end of the road, turn left onto Francis Scott Key Highway
1.4 mi · 2 min · Francis Scott Key Highway
-
8
Continue on York Street
1983 ft · 1 min · York Street
-
9
Turn left onto East Baltimore Street
849 ft · 26 sec · East Baltimore Street
-
10
Turn right onto Reindollar Street
9 m · 1 sec · Reindollar Street
-
11
Arrive at your destination
0 m · 1 sec · Reindollar Street
Car Route Details
A richer read on the saved driving route between Hahns Mill and Taneytown.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Francis Scott Key Highway
At the end of the road, turn left onto Francis Scott Key Highway
1.42 mi · 00h 02m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Chance Rain Showers then Chance Showers And Thunderstorms leaving Hahns Mill and Chance Rain Showers then Chance Showers And Thunderstorms near Taneytown.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Hahns Mill to Taneytown?
The road trip is about 7.3 miles (11.7 km) and usually takes 00h 11m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Rising Sun is a useful midpoint, sitting about 3 miles from Hahns Mill and 4.2 miles from Taneytown.
How much longer is the road route than the straight-line distance?
The direct path is about 4.7 miles (7.6 km), while the road route adds roughly 2.6 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 8:06 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.10 one way or $2.20 round trip. Estimated CO2 is about 2.3 kg one way.
What should you check before leaving?
Before you leave, expect Chance Rain Showers then Chance Showers And Thunderstorms around Hahns Mill and Chance Rain Showers then Chance Showers And Thunderstorms near Taneytown.
Stop Ideas Near Rising Sun
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Rising Sun.
Frederick Airport, MD
Frederick, MD
Hagerstown, MD
Harpers Ferry
Flight Path Map
This map shows the direct air route between Hahns Mill and Taneytown. Straight-line distance: 4.75 mi (7.64 km).
#1 Hahns Mill
Hahns Mill is a place in Maryland, United States.
| Population | 0 |
| Coordinates | 39.6795400, -77.0897000 |
| Altitude | 154 |
| Country | United States |
#2 Taneytown
Town in Carroll County, Maryland, United States
| Population | 6,846 |
| Coordinates | 39.6578800, -77.1744300 |
| Altitude | 154 |
| Country | United States |
End: Reindollar Street (-77.174454, 39.657901)
Estimated Travel Time
Distance: 12 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 14m |
| 40 mph (64.37 km/h) | 00h 10m |
| 50 mph (80.47 km/h) | 00h 08m |
| 60 mph (96.56 km/h) | 00h 07m |
| 70 mph (112.65 km/h) | 00h 06m |
| 80 mph (129 km/h) | 00h 05m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.24 | $1.10 | $2.20 |
| Mid-grade | $4.84 | $1.26 | $2.52 |
| Premium | $5.15 | $1.34 | $2.68 |
| Diesel | $6.36 | $1.65 | $3.31 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Oct 15, 2026