How far is Haddam, CT from Milford, CT?
The driving distance from Haddam, CT to Milford, CT is about 53.3 miles (85.7 km), with a travel time of about 00h 56m by car.
- The straight-line flight distance is about 33.3 miles (53.6 km).
- For a round trip, plan for roughly 01h 52m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 56m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in New Haven County, Connecticut, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Haddam and Milford.
Turn-by-Turn Driving Directions
Step-by-step road directions between Haddam and Milford.
-
1
Start on Station Hill Road
23 m · 10 sec · Station Hill Road
-
2
Turn right onto Saybrook Road
5.2 mi · 9 min · Saybrook Road
-
3
Take the ramp slight left
603 ft · 15 sec
-
4
Keep slight right to continue on CT 9 North: New Britain
1878 ft · 25 sec
-
5
Merge slight left
4.3 mi · 6 min
-
6
Turn left onto CT 66 West: Middletown
46 m · 4 sec
-
7
Continue on Washington Street
2.6 mi · 6 min · Washington Street
-
8
Continue on Meriden Road
4.2 mi · 6 min · Meriden Road
-
9
Take the exit slight left toward I 91 South, CT 15 South: New Haven
1371 ft · 34 sec
-
10
Merge slight left
736 ft · 11 sec
-
11
Take the exit slight right toward CT 15 South
1825 ft · 35 sec
-
12
Keep slight left to continue on CT 15 South
133 m · 8 sec
-
13
Merge slight left
23 mi · 28 min
-
14
Take the exit slight right toward CT 121: Orange
79 m · 10 sec
-
15
Turn right
856 ft · 23 sec
-
16
At the end of the road, turn right onto Grassy Hill Road
2.2 mi · 4 min · Grassy Hill Road
-
17
Continue on North Street
2.4 mi · 5 min · North Street
-
18
At the end of the road, turn right onto River Street
1324 ft · 30 sec · River Street
-
19
Arrive at your destination
0 m · 1 sec · Factory Lane
Car Route Details
A richer read on the saved driving route between Haddam and Milford.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
CT 15 South
Merge slight left
23 mi · 00h 28m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny leaving Haddam and Mostly Sunny near Milford.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Haddam to Milford?
The road trip is about 53.3 miles (85.7 km) and usually takes 00h 56m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Wallingford is a useful midpoint, sitting about 22.9 miles from Haddam and 30.4 miles from Milford.
How much longer is the road route than the straight-line distance?
The direct path is about 33.3 miles (53.6 km), while the road route adds roughly 20 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:38 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $7.42 one way or $14.83 round trip. Estimated CO2 is about 16.7 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Haddam and Mostly Sunny near Milford.
Stop Ideas Near Wallingford
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Wallingford.
Wallingford station
Meriden Transit Center
Berlin
Union Station
Flight Path Map
This map shows the direct air route between Haddam and Milford. Straight-line distance: 33.29 mi (53.57 km).
#1 Haddam
Human settlement in Middlesex County, Connecticut, United States of America
| Population | 8,150 |
| Coordinates | 41.4773200, -72.5120300 |
| Altitude | 27 |
| Country | United States |
#2 Milford
A city in New Haven County, Connecticut.
| Population | 53,259 |
| Coordinates | 41.2223200, -73.0565000 |
| Altitude | 8 |
| Country | United States |
End: Factory Lane (-73.056608, 41.222268)
Estimated Travel Time
Distance: 86 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 46m |
| 40 mph (64.37 km/h) | 01h 19m |
| 50 mph (80.47 km/h) | 01h 03m |
| 60 mph (96.56 km/h) | 00h 53m |
| 70 mph (112.65 km/h) | 00h 45m |
| 80 mph (129 km/h) | 00h 39m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.95 | $7.42 | $14.83 |
| Mid-grade | $4.46 | $8.38 | $16.76 |
| Premium | $4.86 | $9.13 | $18.27 |
| Diesel | $6.00 | $11.27 | $22.55 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Connecticut · May 05, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.